ステンレス鋼溶接金属の窒素含量および気孔

書誌事項

タイトル別名
  • Nitrogen Content and Porosity of Stainless Steel Weld Metal

抄録

Effect of the nitrogen partial pressures in the welding atmospheres of several gas mixtures and welding conditions on the nitrogen content and porosity of stainless steel weld metals were studied by using an arc atmosphere controlled chamber.<BR>The results were summarized as follows<BR>1. The nitrogen contents of weld metals decrease with increasing welding current.<BR>2. The anomalous nitrogen absorption into weld metal is observed at low arc atmospheric pressures.<BR>3. The existence of oxidizing gas in arc atmosphere such as oxygen or carbondioxide contributes greatly to the nitrogen absorption into weld metals.<BR>4. In reducing gas atmospheres such as nitrogen-hydrogen mixtures, the nitrogen contents in weld metals show a tendency to obey the square root law.<BR>5. Although some calculations for the nitrogen absorption into weld metals were made using thermo-dynamic data obtained by an equilibrium study, a great difference between the calculated values and experimental values was generally observed.

収録刊行物

  • 溶接学会誌

    溶接学会誌 35 (4), 330-338, 1966

    一般社団法人 溶接学会

被引用文献 (1)*注記

もっと見る

詳細情報 詳細情報について

  • CRID
    1390001206501213568
  • NII論文ID
    130003762977
  • DOI
    10.2207/qjjws1943.35.330
  • ISSN
    18837204
    00214787
  • 本文言語コード
    ja
  • データソース種別
    • JaLC
    • Crossref
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ