摩擦圧接の研究(第1報)

• 蓮井 淳

  金属材料技術研究所

• 福島 貞夫

  金属材料技術研究所

書誌事項

タイトル別名

• Studies on Friction Welding (Report 1)
• Effects of upsetting time on properties of friction welds
• 摩擦圧接継手の性質におよぼすアプセット時期の効果

抄録

It is generally said that the sudden stop of spindle and the instantaneous upsetting are both the important processes in the final phase of friction welding. However, there is no paper on upsetting time.<BR>Thereupon, welding was carried out to investigate the effects of upsetting time on strength of friction welded joint. In this experiment, 0.45 and 0.25 per cent carbon steel rods were used as specimens. The welding conditions were kept constant, except that the upsetting time relating to stop time of spindle was varied. Effects of upsetting time on properties of joints were judged by roller bend test.<BR>The results are as follows;<BR>(1) In order to get a satisfactorily welded joint, it is desirable to so adjust as to start the upsetting process just before the spindle is stopped.<BR>(2) Even under improper welding condition in previous experiments, in which upsetting time was not so controlled, a satisfactorily welded joint was obtained by adjusting the upsetting time to the abovementioned state.

収録刊行物

• 溶接学会誌

  溶接学会誌 36 (6), 628-632, 1967

  一般社団法人 溶接学会

キーワード

• Metals and Alloys
• Surfaces, Coatings and Films
• Mechanical Engineering
• Mechanics of Materials

詳細情報

• CRID: 1390282681478000768
• NII論文ID: 130003763010
• DOI: 10.2207/qjjws1943.36.628
• ISSN: 18837204
• ISSN: 00214787
• 本文言語コード: ja
• データソース種別:
  • JaLC
  • Crossref
  • CiNii Articles
• 抄録ライセンスフラグ: 使用不可