固相溶接面近傍における結晶粒界挙動の高温観察

書誌事項

タイトル別名
  • High Temperature Obuservation on the Behaviour of Grain-boundaries in the Vicinity of the Solid Phase Weld Interface

抄録

Grain-boundary migration on the weld interface is one of the most important factors affecting the solid phase weld properties.<BR>In this report, the behaviour of grain-boundaries in the vicinity of the weld interface during solid phase welding is pursued continuously with a high temperature microscope, and a observation method to oxidize a specimen slightly at a high temperature is compared with thermal etching method.<BR>The main results obtained in this observation are as follows;<BR>1) In case of observing grain-boundary migration with thermal etching, a sufficient understanding of the nature of thermal etching is indispensable. High temperature oxidizing method is suitable to know the location of grain-boundaries at arbitary time.<BR>2) Grain-boundary migration near the solid phase weld interface is restricted in various way by the interface. For instance, the grain-boundary that coincides with the weld interface is very hard to migrate to leave from the interface compared with the other case. In the vicinity of the weld interface, such grains as have very unstable shapes transiently are often observed; etc.<BR>3) Various processes of grain-boundary migration starting from a grain-boundary triple point formed on the weld interface are observed. (Fig. 3) At the interface without a grain-boundary triple point, the bulge type grain-boundary migration is observed.

収録刊行物

  • 溶接学会誌

    溶接学会誌 45 (7), 582-589, 1976

    一般社団法人 溶接学会

被引用文献 (1)*注記

もっと見る

詳細情報 詳細情報について

  • CRID
    1390282681477141888
  • NII論文ID
    130003763393
  • DOI
    10.2207/qjjws1943.45.582
  • ISSN
    18837204
    00214787
  • 本文言語コード
    ja
  • データソース種別
    • JaLC
    • Crossref
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ