書誌事項
- タイトル別名
-
- Epitaxial Growth and Phase Selection of Austenitic Stainless Steel Weld Metals near Fusion Boundaries. Study on Solidification and Subsequent Transformation of Cr-Ni Stainless Steel Weld Metals. (Report 3).
- Study on Solidification and Subsequent Transformation of Cr-Ni Stainless Steel Weld Metals (Report 3)
- Cr-Ni系ステンレス鋼溶接金属の凝固・変態に関する研究(第3報)
抄録
Solidification behaviors of austenitic stainless steel weld metals near fusion boundaries were studied, in which the epitaxial growth and the selection of primary phase were of main interest. In the AF solidification mode, planar austenite grows epitaxially from austenite grains in the base metal. Subsequently ferrite forms at dendrite boundaries of the primary austenite after the austenite changes from planar to dendritic. In the FA solidification mode, planar austenite grows epitaxially from austenite grains in the base metal as a result of competition between ferrite nucleation and austenite growth. Then ferrite nucleation is followed because of the enrichment of Cr in the liquid, and continues to grow eventually as the primary phase. The ferrite has the K-S relationship with the planar austenite. In the stage of primary ferrite solidification, austenite sodilifies as the second phase at dendrite boundaries, and has the same crystallographic orientation as the original planar austenite. In the sample which solidifies as FA mode with the lowest Cr/Ni ratio, it is possible for austenite to solidify even as the primary phase because of the fluctuations of solutes in the liquid and the change of undercooling due to local change in temperature gradient in the liquid.
収録刊行物
-
- 溶接学会論文集
-
溶接学会論文集 15 (2), 281-291, 1997
一般社団法人 溶接学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282679699658752
-
- NII論文ID
- 130003764564
-
- ISSN
- 24348252
- 02884771
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可