書誌事項
- タイトル別名
-
- Cold workability of Mg-Li and Mg-Zr-Li alloys.
- Mg Li オヨビ Mg Zr Li ゴウキン ノ レイカン カコウセイ
この論文をさがす
抄録
Elongation in the tensile test and reduction of cold rolling to failure of Mg-Li and Mg-Zr-Li alloys were investigated. Grain size of α range alloys cast in the same condition was decreased with increasing lithium and the workability of magnesium was improved by the addition of lithium. More uniform deformation and higher rollig reduction to producing deformation band were obtained in the lithium containing magnesium alloys than in pure magnesium. The microcracks were observed in the deformation band. The ductility of magnesium was remarkably improved by the small addition of zirconium. Binary and ternary alloys consisting of (α+β) two phase were extremely superior in ductility to the single α or β phase alloys. It was confirmed that the spheroidizing treatment of the eutectic structure resulted in the improved workability.
収録刊行物
-
- 軽金属
-
軽金属 40 (4), 285-289, 1990
一般社団法人 軽金属学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001206337429120
-
- NII論文ID
- 130004209004
- 10003032793
-
- NII書誌ID
- AN00069773
-
- COI
- 1:CAS:528:DyaK3cXltlKrsbw%3D
-
- ISSN
- 18808018
- 04515994
- http://id.crossref.org/issn/04515994
-
- NDL書誌ID
- 3668981
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可