種々の試験法で得られる薄鋼板の水素脆化破壊限界の比較

DOI Web Site Web Site 被引用文献6件 参考文献21件

書誌事項

タイトル別名
  • Comparison of Hydrogen Embrittlement Resistance of High Strength Steel Sheets Evaluated by Several Methods
  • シュジュ ノ シケンホウ デ エラレル ウスコウハン ノ スイソゼイカ ハカイ ゲンカイ ノ ヒカク

この論文をさがす

抄録

Applications of ultra high strength steel sheets to automotive body have been expanding year after year. Hydrogen embrittlement (HE) is one of the problems of ultra high strength steels. Various methods are used as the evaluation method of HE resistance. In this study, the critical HE conditions obtained by SSRT, CSRT and 4-point bending test were compared by using the same materials, which have tempered martensite microstructure with the composition of a SCM435 or an V added steel with many hydrogen trapping precipitations. Specimens were charged with hydrogen by the cathodic charging method. The specimen used in the SSRT and the CSRT was machined with notches on the both sides of a parallel part and the stress concentration factor (Kt) of the specimens was 4.26 or 1.76. The specimen used in the 4-point bending test was coupon shape. The critical HE conditions evaluated with the average applied stress and the average hydrogen content of the specimen were different depending on the test methods. HE conditions were also evaluated with the local stress and the local accumulated diffusible hydrogen content at the fracture initiation point. The critical condition evaluated by the 4-point bending test was located in the higher stress and higher hydrogen content region compared with the critical conditions obtained by the CSRT and the SSRT.

収録刊行物

  • 鉄と鋼

    鉄と鋼 100 (10), 1315-1321, 2014

    一般社団法人 日本鉄鋼協会

被引用文献 (6)*注記

もっと見る

参考文献 (21)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ