Niめっき後の伸線加工条件が耐食性におよぼす影響

DOI Web Site Web Site 参考文献2件

書誌事項

タイトル別名
  • Effects of Drawing Conditions after Ni-Plating on Corrosion Resistance of Ni-Plated Steel Wire
  • Niメッキ アト ノ シンセン カコウ ジョウケン ガ タイショクセイ ニ オヨボス エイキョウ

この論文をさがす

抄録

Ni-plated steel wires used for springs in electrical appliances and other devices have good corrosion resistance. They are expected as alternatives to stainless-steel wire in a mildly corrosive environment. Further corrosion resistance is required for applications in automobile parts. The reasons for the low corrosion resistance are assumed to be a decrease in the average Ni-plated thickness upon drawing, and the variation in the Ni-plating thickness owing to the irregular deformation of the interface between the Ni-plating and the base material. In this study, the effects of the drawing conditions and Ni-plated thickness on corrosion resistance were examined. Under drawing conditions, the reduction in area varies from 0% to 40%. On the other hand, Ni-plated thickness is in the range from 2μm to 30μm. It is found that the drawing with a 10% reduction in area after applying Ni-plating thicker than 30μm are the most effective conditions for corrosion resistance.

収録刊行物

  • 塑性と加工

    塑性と加工 56 (651), 317-321, 2015

    一般社団法人 日本塑性加工学会

参考文献 (2)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ