書誌事項
- タイトル別名
-
- Effect of Cr Content on the Magnetic Properties of Fe-Cr Soft Magnetic Material by MIM Process
- MIM ニ ヨル Fe-Crケイナンジセイ ザイリョウ ノ ジキ トクセイ ニ オヨボス Crリョウ ノ エイキョウ
この論文をさがす
抄録
In recent years, the soft magnetic material parts have been widely used in the fields of industrial equipments, consumer electronics, automobiles, and so on. To fabricate these soft magnetic material parts, electrical steel and P/M method is normaly used. With the increase of fabricating complex shaped parts, processing method with more flexibility in design also be needed. For this reason, MIM process is hoped to be a near-net-shape, cost reduction and mass production method which can fabricate three-dimensional complex shaped parts. Fe-Cr-based soft magnetic material is developed in 1960s~1970s to be used in corrosive environments. Because it is less expensive than the PB permalloy. Mainly composition comprising a 13 %Cr or higher is used to make material stable. However, the maximum magnetic flux density of material decreases with increase of Cr content. In this research, the effect of Cr content on the magnetic properties under DC and AC magnetic field were investigated by mixing SUS430L alloy powder and iron powder.
収録刊行物
-
- 粉体および粉末冶金
-
粉体および粉末冶金 62 (8), 431-436, 2015
一般社団法人 粉体粉末冶金協会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001206309901696
-
- NII論文ID
- 130005094640
-
- NII書誌ID
- AN00222724
-
- ISSN
- 18809014
- 05328799
-
- NDL書誌ID
- 026683182
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可