ZrO<sub>2</sub>&ndash;TiO<sub>2</sub> porous ceramics from particle stabilized wet foam by colloidal processing

DOI Web Site 参考文献14件
  • BHASKAR Subhasree
    Institute of Processing and Application of Inorganic Materials (PAIM), Department of Materials Science and Engineering, Hanseo University
  • PARK Jung Gyu
    Institute of Processing and Application of Inorganic Materials (PAIM), Department of Materials Science and Engineering, Hanseo University
  • LEE Mi Jai
    Korea Institute of Ceramic Engineering and Technology (KICET)
  • LIM Tae Young
    Korea Institute of Ceramic Engineering and Technology (KICET)
  • HAN In Sub
    Korea Institute of Energy Research (KIER)
  • KIM Ik Jin
    Institute of Processing and Application of Inorganic Materials (PAIM), Department of Materials Science and Engineering, Hanseo University

書誌事項

タイトル別名
  • ZrO<sub>2</sub>–TiO<sub>2</sub> porous ceramics from particle stabilized wet foam by colloidal processing

抄録

ZrO2–TiO2 porous ceramics recently has been great interest in the dielectric resonator materials, as well as in the fields of preparation of optical devices, and bio materials. This study reveals an approach for the production of micro porous ceramics consisting of TiO2 and ZrO2 fabricated by colloidal wet processing. ZrO2 particles in the colloidal suspension was partially hydrophobized using propyl gallate as an amphiphile, with a suitable pH range. The different mole ratios of the TiO2 suspension was added to the surface modified ZrO2 suspension. The contact angle was found to be around 75° with the adsorption free energy of 1.8 × 10−11–2.15 × 10−11 J. The Laplace pressure of about 1.48–1.24 mPa was determined corresponding to the wet foam stability of about 76–80%. The microstructure analysis is done after sintering the dried samples for obtaining the porous ceramics.

収録刊行物

参考文献 (14)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ