気体圧力変動を用いた気泡発生制御法における導管長さ及び境界条件の影響

書誌事項

タイトル別名
  • Effects of Tube Length and Boundary Condition on the Bubble Generation Method Using Acoustic Pressure Wave in Gas Phase
  • キタイ アツリョク ヘンドウ オ モチイタ キホウ ハッセイ セイギョホウ ニ オケル ドウカン ナガサ オヨビ キョウカイ ジョウケン ノ エイキョウ

この論文をさがす

抄録

A bubble generation method that uses a slit elastic tube and an acoustic pressure wave in the gas phase can produce single bubbles of various sizes. In the method, the bubble size greatly depends on the tube length and the boundary condition of the tube end. In this study, we investigated the effects of acoustic pressure waveforms on the bubble generation. We changed the tube length and the boundary condition of the tube end and measured the waveform using the electret condenser microphone (ECM) and the generated bubble diameter. The time length that the positive pressure was maintained on the waveform depends on the tube length and the boundary condition. The diameter of the generated bubble also changed with the time length. We demonstrated that this phenomenon was caused by the change of the phase of reflected wave at the tube end by using FDTD simulation.

収録刊行物

  • 混相流

    混相流 29 (5), 509-514, 2016

    日本混相流学会

参考文献 (8)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ