超高強度低合金TRIP鋼の組織と機械的性質

DOI Web Site Web Site 被引用文献21件 参考文献90件

書誌事項

タイトル別名
  • Microstructure and Mechanical Properties of Ultrahigh-Strength TRIP-aided Steels
  • チョウコウキョウド テイゴウキン TRIPコウ ノ ソシキ ト キカイテキ セイシツ

この論文をさがす

抄録

<p>This paper introduces the microstructure, retained austenite characteristics, strain-induced transformation-deformation mechanism and mechanical properties of transformation-induced plasticity (TRIP)-aided martensitic (TM) steels for the automotive applications. Because the microstructure consists of a wide lath-martensite structured matrix and a mixture of narrow lath-martensite and metastable retained austenite (MA-like phase), the TM steel produced a good combination of tensile strength and cold formability. If Cr and/or Mo were added into 0.2%C-1.5%Si-1.5%Mn steel to enhance its hardenability, the resultant TM steel achieved superior notch fatigue strength and impact and fracture toughness to conventional structural steel such as SCM420. These enhanced mechanical properties were found to be mainly caused by: (1) plastic relaxation of the stress concentration, which results from expansion strain on the strain-induced transformation of the metastable retained austenite; and (2) the presence of a large quantity of finely dispersed MA-like phase, which suppresses crack or void initiation and subsequent connection.</p>

収録刊行物

  • 鉄と鋼

    鉄と鋼 103 (1), 1-11, 2017

    一般社団法人 日本鉄鋼協会

被引用文献 (21)*注記

もっと見る

参考文献 (90)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ