EBSD Observation of Pure Iron with Near-Cube Orientation Fabricated by Cold Rolling and Annealing

DOI Web Site Web Site 被引用文献1件 参考文献13件
  • Okai Daisuke
    Department of Materials and Synchrotron Radiation Engineering, Graduate School of Engineering, University of Hyogo Japan Science and Technology Agency
  • Yae Masatoshi
    Department of Materials Science and Chemistry, Graduate School of Engineering, University of Hyogo
  • Yamamoto Atsushi
    Department of Materials and Synchrotron Radiation Engineering, Graduate School of Engineering, University of Hyogo
  • Doi Toshiya
    Department of Energy Science and Technology, Graduate School of Energy Science, Kyoto University Japan Science and Technology Agency

この論文をさがす

抄録

<p>The orientation characteristics of a pure iron tape fabricated by cold rolling and annealing were evaluated using electron backscatter diffraction (EBSD) analysis. The {1 7 1}<4 3 17> orientation, which is a near-cube orientation, was strongly formed on the tape surface. For the oriented iron tape, the out-of-plane misorientation of (0 0 1) from the cube orientation is ca. 11°. The areal fraction of cube orientations with an angular deviation ≤20° amounts to 94.7%. The average grain size is approximately 370 μm for the near-cube oriented iron tape.</p>

収録刊行物

被引用文献 (1)*注記

もっと見る

参考文献 (13)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ