-
- 宮﨑 寛史
- 株式会社 東芝 電力・社会システム技術開発センター
-
- 岩井 貞憲
- 株式会社 東芝 電力・社会システム技術開発センター
-
- 戸坂 泰造
- 株式会社 東芝 電力・社会システム技術開発センター
-
- 野村 俊自
- 株式会社 東芝 電力・社会システム技術開発センター
-
- 来栖 努
- 株式会社 東芝 電力・社会システム技術開発センター
-
- 植田 浩史
- <sup> </sup>岡山大学 工学部 電気通信系学科 早稲田大学 先進理工学研究科
-
- 野口 聡
- 北海道大学 大学院情報科学研究科 早稲田大学 先進理工学研究科
-
- 石山 敦士
- 早稲田大学 先進理工学研究科
-
- 浦山 慎一
- 京都大学 医学研究科附属・脳機能総合研究センター
-
- 福山 秀直
- 京都大学 医学研究科附属・脳機能総合研究センター
書誌事項
- タイトル別名
-
- Research and Development of a High-field Coil System
- 高磁場コイルシステムの研究開発 : 高磁場MRI用高温超電導磁石の開発
- コウジバ コイル システム ノ ケンキュウ カイハツ : コウジバ MRIヨウ コウオン チョウデンドウジシャク ノ カイハツ
- ―高磁場MRI 用高温超電導磁石の開発―<i> </i>
- – Development of a high-temperature superconducting magnet for ultrahigh-field MRI –
この論文をさがす
抄録
<p>A project for developing of RE1Ba2Cu3O7-δ (REBCO) magnets to be utilized in ultrahigh-field magnetic resonance imaging (MRI) was started in 2013. Our final targets are 9.4 T MRI systems for whole-body and brain imaging. In this project, two different development approaches towards the final target were planned. One is a small REBCO coil that can generate 10 Tclass magnetic fields, which is the same level as the target magnetic field. The other is a conduction-cooled 1.5 T REBCO MRI magnet that has a room-temperature bore of 396 mm, which is as large as those of mid-sized model magnets. These results were reflected in the design of a conduction-cooled 9.4 T REBCO magnet for whole-body MRI systems.</p>
収録刊行物
-
- 低温工学
-
低温工学 52 (4), 224-233, 2017
公益社団法人 低温工学・超電導学会 (旧 社団法人 低温工学協会)
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282679591287680
-
- NII論文ID
- 130005901380
-
- NII書誌ID
- AN00333419
-
- ISSN
- 18800408
- 03892441
-
- NDL書誌ID
- 028398035
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可