Hydrogen Production by Decomposition of Methane and Methanol Mixture over Ni-Pd/Al<sub>2</sub>O<sub>3 </sub>
-
- AWAD Ali
- Chemical Engineering Department, Universiti Teknologi PETRONAS
-
- SALAM Abdus
- Institute of Fuel Research and Development (IFDR)
-
- ABDULLAH Bawadi
- Chemical Engineering Department, Universiti Teknologi PETRONAS
抄録
<p>Thermocatalytic decomposition of methane (TCD) is a promising method for producing hydrogen. However, the main concerns of this process are very high reaction temperature and fast deactivation of the catalyst. In this work, a positive approach has been made to minimize both effects by using Pd-promoted catalyst prepared by the co-precipitation and impregnation method. Pd has a high affiliation with carbon, thus instead of encapsulating Ni, it diffuses in promoter hence the catalytic lifetime is prolonged. EDX and XRD analysis confirmed the presence of NiAl2O4, Al2O3, Pd, and Ni. BET analysis depicts that the surface area is decreased as the amount of metal content impregnated on the support is increased. FESEM analysis shows the nano particles are synthesized while carbon nanofibers are produced as by-product. The highest conversion of CH4 was given by Cat 1 (24.7 wt%Ni-0.3 wt%Pd/Al2O3) i.e. 45%.</p>
収録刊行物
-
- 日本エネルギー学会誌
-
日本エネルギー学会誌 96 (10), 445-450, 2017
一般社団法人 日本エネルギー学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001204357398144
-
- NII論文ID
- 130006188601
-
- ISSN
- 18826121
- 09168753
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可