-
- 頃安 貞利
- 帝京大学
書誌事項
- タイトル別名
-
- Effect of Thermal Insulation Coat on Mold Filling for Thin Wall Aluminum Alloy Casting in Expendable Pattern Casting Process
抄録
The effect of the thermal insulation coat on the mold filling for a thin wall aluminum alloy casting in the expendable pattern casting process was investigated experimentally and theoretically. Thin wall aluminum alloy plates were cast by the EPC process using the thermal insulation coat. The fluidity length and melt velocity were measured. Even when the thermal insulation coat was used, the fluidity length of the melt did not increase so much. The fluidity lengths were predicted by using measurement values of the melt velocity. The predicted values were in approximately agreement with experimental values.
収録刊行物
-
- 茨城講演会講演論文集
-
茨城講演会講演論文集 2017.25 (0), 405-, 2017
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001205855235328
-
- NII論文ID
- 130006402521
-
- ISSN
- 24242683
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可