書誌事項
- タイトル別名
-
- Effects of Support Condition and Dimension of Glass Plates on the Wind Load Resistance
この論文をさがす
抄録
The effects of support condition and dimension of glass plate on the wind load resistance are investigated by performing full-scale breakage tests and numerical simulation that can predict glass failure pressures. Full-scale breakage tests were carried out using window specimens whose edges were supported as used in practice, called “elastic support condition”, in order to investigate the application of the existing numerical simulation to such a support condition. The results indicate that the numerical simulation can capture the load resistance obtained from the full-scale breakage tests by adjusting the parameters related to the material properties and testing environment, especially relative humidity. By using the numerical simulation, the examination of the effects of support condition and dimension glass plate, and the comparisons with the Japanese and USA design codes are performed. The results show that the support condition of glass plates affect slightly on the wind load resistance. On the other hand, the load resistance depends on size and aspect ratio more significantly than expected in the Japanese code. Therefore, it is found that the Japanese code seems to overestimate the wind resistance of glass plates because it does not reflect the effects of size and aspect ratio of glass plate, which are considered in the USA code.
収録刊行物
-
- 日本風工学会論文集
-
日本風工学会論文集 42 (3), 100-110, 2017
一般社団法人 日本風工学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282680205997568
-
- NII論文ID
- 130006517023
-
- NII書誌ID
- AN10072785
-
- ISSN
- 09121935
- 1349340X
- 13493507
-
- NDL書誌ID
- 028439430
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
- KAKEN
-
- 抄録ライセンスフラグ
- 使用不可