曲面パラメータを用いた追加/修正可能な加工経路生成法の開発

DOI Web Site 参考文献3件

書誌事項

タイトル別名
  • Development of Tool Path Generation with Addable and Modifiable using Surface Parameter

抄録

<p>In the CAM field, a lot of strategies for tool path generation are proposed. CAM operators have to select an appropriate strategy in accordance with the characteristics of the cutting surface. Then, if the generated tool path based on the selected strategy were judged as insufficient to the cutting result, i.e., surface roughness and homogeneity, another strategy have to be attempted repeatedly. Therefore, large amount of effort are required until a satisfactory tool path is obtained. In order to solve this problem, a new method of tool path generation with addable and modifiable that can be calculated with low cost is proposed in this study. This novel method enables fast addition and modification of tool paths by calculating on parametric domain of cutting surfaces expressed as parametric surfaces. Using this method, it can be expected that the CAM operators can avoid confusion in strategy selection and reduce the effort to obtain the satisfactory tool path. This report describes the basic principle and implementation of the proposed method.</p>

収録刊行物

  • 精密工学会誌

    精密工学会誌 84 (5), 468-472, 2018-05-05

    公益社団法人 精密工学会

参考文献 (3)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ