Improving the Properties of Injection Molded Products with Induction Heating and Cooling Molds
-
- Murata Yasuhiko
- Department of Mechanical Engineering, Nippon Institute of Technology
-
- Koike Masayoshi
- Department of Mechanical Engineering, Nippon Institute of Technology
-
- Pan Song
- Department of Mechanical Engineering, Nippon Institute of Technology
この論文をさがす
抄録
<p>An induction heating and cooling mold that can keep the surface temperature of the entire mold cavity uniform and has a new heating and cooling insert with a gas vent mechanism is designed and produced. The effects of the temperature of the mold cavity surface, of the cavity air during the melt filling process, and of the organic gas generated from the melt on the appearance and mechanical properties of an injection molded product made of high impact polystyrene are studied. It is found that the heating and cooling mold with a gas vent can suppress molding defects, such as a weld lines and gas burns, and can greatly increase the displacement ratio of molded products obtained in the tensile test. This means that the effects of the gas vent and the surface temperature of the cavity have been quantitatively clarified using this type of mold.</p>
収録刊行物
-
- International Journal of Automation Technology
-
International Journal of Automation Technology 9 (1), 3-9, 2015-01-05
富士技術出版株式会社