Three-dimensional-network Fe₃O₄/Graphene/Carbon Nanotubes Composite with High Rate Cycling Capability as Anode Materials for Lithium-ion Batteries

  • QIN Liping
    Department of Science & Technology, Guangxi University of Science and Technology
  • LIANG Shuquan
    School of Materials Science and Engineering, Central South University
  • TAN Xiaoping
    School of Materials Science and Engineering, Central South University
  • YAN Gongqin
    School of mechanical engineering, Guangxi University of Science and Technology

書誌事項

タイトル別名
  • Three-dimensional-network Fe<sub>3</sub>O<sub>4</sub>/Graphene/Carbon Nanotubes Composite with High Rate Cycling Capability as Anode Materials for Lithium-ion Batteries

この論文をさがす

抄録

Fe3O4/graphene/carbon nanotubes composite was successfully synthesized through a facile solvothermal process. The Fe3O4 particles are dispersed in the three-dimensional (3D) conductive network forming by graphene nanosheets and cross-linked CNTs. As anode materials for lithium-ion batteries, the adding ratio of GO and CNTs in solvothermal process influences the electrochemical performance of the products. The obtained composite by the adding ratio of GO and CNTs 1:1 displays good electrochemical performance. The composite shows an initial charge capacity of 1244.9 and 1012.1 mA·h·g−1 after 200 cycles at a current density of 500 mA·g−1. At the current density of 1300 mA·g−1, it delivers 710.2 mA·h·g−1 after 200 cycles, remaining the initial charge capacity of 90.8%. In addition, the composite shows good coulomb efficiency and rate performance. The good performance of composite is described to the uniform distribution of Fe3O4 particles, graphene and CNTs in the 3D conductive network structure, which is beneficial for the electrolyte penetrating into the composite in all directions.

収録刊行物

  • Electrochemistry

    Electrochemistry 85 (7), 397-402, 2017

    公益社団法人 電気化学会

参考文献 (35)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ