Development of a cyclic two-surface model for structural steels with yield plateau 降伏棚のある構造用鋼材における繰り返し二曲面モデルの開発

この論文をさがす

著者

    • 沈, 赤 シン, チー

書誌事項

タイトル

Development of a cyclic two-surface model for structural steels with yield plateau

タイトル別名

降伏棚のある構造用鋼材における繰り返し二曲面モデルの開発

著者名

沈, 赤

著者別名

シン, チー

学位授与大学

名古屋大学

取得学位

博士 (工学)

学位授与番号

甲第2767号

学位授与年月日

1993-03-25

注記・抄録

博士論文

目次

  1. CONTENTS / p1 (0004.jp2)
  2. 1 Introduction / p1 (0006.jp2)
  3. 1.1 General / p1 (0006.jp2)
  4. 1.2 Overview of the Existing Two-surface Models / p5 (0008.jp2)
  5. 1.3 Content of the Study / p10 (0011.jp2)
  6. 2 Experiments of Steels SS400, SM490 and SM570 under Uniaxial Cyclic Loading / p13 (0012.jp2)
  7. 2.1 Introduction / p13 (0012.jp2)
  8. 2.2 Test Setup and Specimens / p13 (0012.jp2)
  9. 2.3 Loading Patterns in the Experiments / p16 (0014.jp2)
  10. 2.4 Cyclic Characteristics of Steels / p22 (0017.jp2)
  11. 2.5 Summary / p27 (0019.jp2)
  12. 3 Development of the Modified Two-surface Model for Steels under Uniaxial Cyclic Loading / p29 (0020.jp2)
  13. 3.1 Introduction / p29 (0020.jp2)
  14. 3.2 Review of Dafalias・Popov Two-surface Model / p30 (0021.jp2)
  15. 3.3 Proposal of the Modified Two-surface Model based on the Experimental Observations / p32 (0022.jp2)
  16. 3.4 Determination of Model Parameters / p51 (0031.jp2)
  17. 3.5 Comparison between the Experimental Results and Prediction by the Proposed Model / p53 (0032.jp2)
  18. 3.6 Effect of the Model Parameters in the Prediction / p62 (0037.jp2)
  19. 3.7 Some Typical Cyclic Behavior Predicted by the Proposed Model / p66 (0039.jp2)
  20. 3.8 Summary / p70 (0041.jp2)
  21. 4 Proposal of the Generalized Two-surface Model in Multidimensional Stress State / p71 (0041.jp2)
  22. 4.1 Introduction / p71 (0041.jp2)
  23. 4.2 Fundamentals of the Incremental Theory of Plasticity / p72 (0042.jp2)
  24. 4.3 Proposal of the Generalized Two-surface Model / p75 (0043.jp2)
  25. 4.4 Summary / p90 (0051.jp2)
  26. 5 Application of Proposed Model to the Multi-dimensional Stress State / p93 (0052.jp2)
  27. 5.1 Introduction / p93 (0052.jp2)
  28. 5.2 Description of the Experiment / p93 (0052.jp2)
  29. 5.3 Finite Element Method Used in the Plasticity Analysis / p98 (0055.jp2)
  30. 5.4 Scheme of Finite Element Program / p104 (0058.jp2)
  31. 5.5 Comparison between the Experimental Results and Prediction / p107 (0059.jp2)
  32. 5.6 Summary / p109 (0060.jp2)
  33. 6 Application of Proposed Model to the Biaxial Cyclic Loading / p113 (0062.jp2)
  34. 6.1 Introduction / p113 (0062.jp2)
  35. 6.2 Torsion-Compression Testing System / p114 (0063.jp2)
  36. 6.3 Application of the Proposed Two-surface Model to the Torsion Compression Experiments / p123 (0067.jp2)
  37. 6.4 Comparison between Experimental Results and Prediction / p130 (0071.jp2)
  38. 6.5 Application of the Proposed Model to the Nonproportional Cyclic Loading / p141 (0076.jp2)
  39. 6.6 Summary / p148 (0080.jp2)
  40. 7 Summary and Conclusions / p149 (0080.jp2)
  41. References / p155 (0083.jp2)
3アクセス

各種コード

  • NII論文ID(NAID)
    500000095752
  • NII著者ID(NRID)
    • 8000000095978
  • DOI(NDL)
  • NDL書誌ID
    • 000000260066
  • データ提供元
    • NDL-OPAC
    • NDLデジタルコレクション
ページトップへ