Preparation of silicate ceramics powders and their properties シリケートセラミックスの粉末合成と焼結体の特性

この論文をさがす

著者

    • 森, 利之 モリ, トシユキ

書誌事項

タイトル

Preparation of silicate ceramics powders and their properties

タイトル別名

シリケートセラミックスの粉末合成と焼結体の特性

著者名

森, 利之

著者別名

モリ, トシユキ

学位授与大学

埼玉大学

取得学位

博士 (工学)

学位授与番号

乙第7号

学位授与年月日

1993-03-24

注記・抄録

博士論文

目次

  1. TABLE OF CONTENTS / p1 (0003.jp2)
  2. Chapter / p6 (0008.jp2)
  3. 1.1 Introduction / p6 (0008.jp2)
  4. 1.2 The crystal structure and some properties of ZrSiO₄ / p8 (0010.jp2)
  5. 1.3 The crystalstructure and some properties of mullite / p18 (0020.jp2)
  6. References / p25 (0027.jp2)
  7. 2 Experimental procedure / p32 (0034.jp2)
  8. 2.1 Preparation of ZrSiO₄ powder / p32 (0034.jp2)
  9. 2.2 Sintering of ZrSiO₄ / p38 (0040.jp2)
  10. 2.3 Mechanical properties of sintered ZrSiO₄ / p39 (0041.jp2)
  11. 2.4 Stability of ZrSiO₄ sintered body against fused alkaline glass / p41 (0043.jp2)
  12. 2.5 Preparation and mechanical properties of Al₂O₃/MgO stabilized ZrO₂/ZrSiO₄ composite / p43 (0045.jp2)
  13. 2.6 High fracture toughness of mullite ceramics / p44 (0046.jp2)
  14. References / p45 (0047.jp2)
  15. Results and discussion / p46 (0048.jp2)
  16. 3 Influence of starting materials and seeding / p46 (0048.jp2)
  17. 3.1 Influence of starting materials and seeding on the preparation ofZrSiO₄ powder / p46 (0048.jp2)
  18. 3.2 Prepararion conditions of ZrSiO₄ composition precursor gels from Si(OEt)₄ and[化学式]alkoxides / p57 (0059.jp2)
  19. References / p66 (0068.jp2)
  20. 4 Preparation of ZrSiO₄ from ZrOCl₂・8H₂O and Si(OEt)₄ or SiO₂ sol / p69 (0071.jp2)
  21. 4.1 Investigation of preparation conditions for ZrSiO₄ composition precursor gels / p69 (0071.jp2)
  22. 4.2 Preparation of ZrSiO₄ from ZrOCl₂・8H₂O and SiO₂ sol / p82 (0084.jp2)
  23. References / p97 (0099.jp2)
  24. 5 Sintering,mechanical properties and chemical stability of high-purity ZrSiO₄ / p102 (0104.jp2)
  25. 5.1 Sintering of high-purity ZrSiO₄ / p102 (0104.jp2)
  26. 5.2 Mechanical properties of high-purity sintered ZrSiO₄ / p114 (0116.jp2)
  27. References / p126 (0128.jp2)
  28. 6.Applicable properties of high-purity ZrSiO₄ / p128 (0130.jp2)
  29. 6.1 Stability of high-purity ZrSiO₄ sintered body against fused alkaline glass / p128 (0130.jp2)
  30. 6.2 Preparation and mechanical proeprties of Al₂O₃-MSZ-ZrSiO₄ composite / p151 (0153.jp2)
  31. References / p165 (0167.jp2)
  32. 7.High fracture toughness of mullite ceramics / p167 (0169.jp2)
  33. 7.1 Influence of lantanoide oxide addition / p169 (0171.jp2)
  34. 7.2 Influence of Y₂O₃ addition / p173 (0175.jp2)
  35. References / p185 (0187.jp2)
  36. 8 Summary / p187 (0189.jp2)
  37. 8.1 Influence of starting materials and seeding / p187 (0189.jp2)
  38. 8.2 Preparation of ZrSiO₄ from ZrOCl₂-8H₂O and Si(OEt)₄ or SiO₂ sol / p188 (0190.jp2)
  39. 8.3 Sintering,mechanical properties of high-purity ZrSiO₄ / p190 (0192.jp2)
  40. 8.4 Applicable properties of high-purity ZrSiO₄ / p192 (0194.jp2)
  41. 8.5 High fracture toughness of mullite ceramics / p196 (0198.jp2)
  42. References / p197 (0199.jp2)
  43. ACKNOWLEDGEMENTS / p199 (0201.jp2)
0アクセス

各種コード

  • NII論文ID(NAID)
    500000096342
  • NII著者ID(NRID)
    • 8000000096568
  • DOI(NDL)
  • NDL書誌ID
    • 000000260656
  • データ提供元
    • NDL-OPAC
    • NDLデジタルコレクション
ページトップへ