Fundamental study high strength bolted tensile joints 高力ボルトフランジ継手に関する基礎的研究
この論文にアクセスする
この論文をさがす
著者
書誌事項
- タイトル
-
Fundamental study high strength bolted tensile joints
- タイトル別名
-
高力ボルトフランジ継手に関する基礎的研究
- 著者名
-
山口, 隆司
- 著者別名
-
ヤマグチ, タカシ
- 学位授与大学
-
京都大学
- 取得学位
-
博士 (工学)
- 学位授与番号
-
甲第6407号
- 学位授与年月日
-
1996-03-23
注記・抄録
博士論文
本文データは平成22年度国立国会図書館の学位論文(博士)のデジタル化実施により作成された画像ファイルを基にpdf変換したものである
目次
- 論文目録 / (0001.jp2)
- Table of Contents / p3 (0006.jp2)
- Abstract / p1 (0005.jp2)
- Acknowledgments / p2 (0006.jp2)
- Table of Contents / p3 (0006.jp2)
- List of Tables / p6 (0008.jp2)
- List of Figures / p8 (0009.jp2)
- List of Photos / p12 (0011.jp2)
- Chapter1 Introduction / p1 (0011.jp2)
- 1.1 General Remarks on High Strength Bolted Tensile Joints / p1 (0011.jp2)
- 1.2 Classification of High Strength Bolted Tensile Joints / p3 (0012.jp2)
- 1.3 State of the Arts on Study of High Strength Bolted Tensile Joints / p4 (0013.jp2)
- 1.4 Technical Problems to be Solved for Future Application / p6 (0014.jp2)
- 1.5 Objectives and Scopes / p7 (0014.jp2)
- References / p8 (0015.jp2)
- Chapter2 Mechanical Behavior of High Strength Bolts / p15 (0018.jp2)
- 2.1 Introduction / p15 (0018.jp2)
- 2.2 Mechanical Behavior under Monotonic Loading / p16 (0019.jp2)
- 2.3 Fatigue Strength / p21 (0021.jp2)
- 2.4 Conclusions / p24 (0023.jp2)
- References / p25 (0023.jp2)
- Chapter3 Mechanical Behavior of High Strength Bolts and Its Adjacent Structural Elements / p59 (0040.jp2)
- 3.1 Introduction / p59 (0040.jp2)
- 3.2 Experiment on BAF model / p59 (0040.jp2)
- 3.3 Finite Element Analysis on BAF model / p63 (0042.jp2)
- 3.4 Conclusions / p69 (0045.jp2)
- References / p70 (0046.jp2)
- Chapter4 Mechanical Behavior of Split Tee Flange Joints / p92 (0057.jp2)
- 4.1 Introduction / p92 (0057.jp2)
- 4.2 Mechanical Behavior under Static Loading / p93 (0057.jp2)
- 4.3 Fatigue Behavior of the Split Tee Flange Joints / p100 (0061.jp2)
- 4.4 Conclusions / p108 (0065.jp2)
- References / p109 (0065.jp2)
- Chapter5 Simple Analysis on Split Tee Flange Joints using 2-dimensional Finite Element Method / p141 (0081.jp2)
- 5.1 Introduction / p141 (0081.jp2)
- 5.2 Quasi-2 dimensional Analysis on the Split Tee Flange Joints / p142 (0082.jp2)
- 5.3 Results and Discussions / p143 (0082.jp2)
- 5.4 Conclusions / p145 (0083.jp2)
- References / p146 (0084.jp2)
- Chapter6 The Application of the High Strength Bolted Tensile Flange Joint-High Strength Bolted Tube Flange Joint- / p156 (0089.jp2)
- 6.1 Introduction / p156 (0089.jp2)
- 6.2 The Mechanical Behavior of the Tube Flange Joints / p157 (0089.jp2)
- 6.3 Simple Design Procedure for the Tube Flange Joints / p166 (0094.jp2)
- 6.4 Conclusions and Future Needs / p169 (0095.jp2)
- References / p170 (0096.jp2)
- Chapter7 Conclusions / p204 (0113.jp2)
- Reserch Activities / p207 (0114.jp2)