Research on Tunable Midinfrared Generation Employing Nonlinear Optical Processes 非線形光学過程に基づく可変中赤外光発生の研究
この論文にアクセスする
この論文をさがす
著者
書誌事項
- タイトル
-
Research on Tunable Midinfrared Generation Employing Nonlinear Optical Processes
- タイトル別名
-
非線形光学過程に基づく可変中赤外光発生の研究
- 著者名
-
Sajjad Haidar
- 著者別名
-
サッジャド ハイダル
- 学位授与大学
-
東北大学
- 取得学位
-
博士 (工学)
- 学位授与番号
-
甲第7410号
- 学位授与年月日
-
2000-03-23
注記・抄録
博士論文
目次
- ABSTRACT / (0004.jp2)
- CONTENTS / (0005.jp2)
- CHAPTER-1 Introduction / (0008.jp2)
- 1.1.Development of tunable mid-IR generating System / p1 (0009.jp2)
- 1.2.Applications of mid-IR / p1 (0009.jp2)
- 1.3.Infrared generation by mixing / p3 (0011.jp2)
- 1.4.Implemented system / p6 (0014.jp2)
- 1.5.Advantages of OPO-DFG system / p7 (0015.jp2)
- 1.6.Practical system efficiency enhancement considerations / p7 (0015.jp2)
- 1.7.Contents of the dissertation / p12 (0020.jp2)
- 1.8.References / p13 (0021.jp2)
- CHAPTER-2 Optical Parametric Oscillator:Theory and Practical Design Considerations / (0023.jp2)
- 2.1.Optical parametric oscillator(OPO) / p15 (0024.jp2)
- 2.2.Principles of operation of an OPO / p16 (0025.jp2)
- 2.3.Brosnan's model / p17 (0026.jp2)
- 2.4.Resonated wave Spot Size / p22 (0031.jp2)
- 2.5.Linewidth / p23 (0032.jp2)
- 2.6.Experimental OPOs / p25 (0034.jp2)
- 2.7.References / p28 (0037.jp2)
- CHAPTER-3 Experimental OPOs / (0038.jp2)
- 3.1 Experimental OPOs basic design considerations / p29 (0039.jp2)
- 3.2.1 Unstable resonator OPO / p41 (0051.jp2)
- 3.3.1. Flat-flat mirror cavity / p48 (0058.jp2)
- 3.4.References / p57 (0067.jp2)
- CHAPTER-4 Injection Seeding of Optical Parametric Oscillator / (0068.jp2)
- 4.1.Injection seeding of optical parametric oscillator / p58 (0069.jp2)
- 4.2.Injection mechanism / p58 (0069.jp2)
- 4.3.Injection-seeding of the experimental OPO / p60 (0071.jp2)
- 4.4.Signal and idler power in the tuning range / p65 (0076.jp2)
- 4.5.injection level and further linewidth narrowing by etalon insertion / p66 (0077.jp2)
- 4.6.Generation of other wavelengths / p68 (0079.jp2)
- 4.7.References / p68 (0079.jp2)
- CHAPTER-5 Difference Frequency Generation:Process,Acceptance Bandwidth and Acceptance Angle / (0080.jp2)
- 5.1.Coupled amplitude equations,and difference frequency generation / p69 (0081.jp2)
- 5.2.Phase-matching for difference frequency generation / p72 (0084.jp2)
- 5.3.Effective crystal length for DFG / p73 (0085.jp2)
- 5.4.Difference frequency generation process:spectral bandwidth and acceptance angle / p74 (0086.jp2)
- 5.5.Acceptance angle and linewidth for DFG AgGaS₂ and AgGaSe₂ crystals / p77 (0089.jp2)
- 5.6.Optimum crystal length / p84 (0096.jp2)
- 5.7.Tuning of OPO and difference-frequency generation / p84 (0096.jp2)
- 5.8.Quartz retarder / p85 (0097.jp2)
- 5.9.References / p88 (0100.jp2)
- CHAPTER-6 Difference Frequency Generation(DFG)in AgGaS₂ and AgGaSe₂ Crystals / (0102.jp2)
- 6.1.AgGaS₂ and AgGaSe₂ crystals / p90 (0103.jp2)
- 6.2.Basic experimental setup / p92 (0105.jp2)
- 6.3.Tuning at the point of inversion / p97 (0110.jp2)
- 6.4.DFG energy measurement / p100 (0113.jp2)
- 6.5.Beam quality and spectrum of the generated mid-ir / p106 (0121.jp2)
- 6.6.Acceptance angle / p108 (0123.jp2)
- 6.7.DFG power calculation / p109 (0124.jp2)
- 6.8.References / p112 (0127.jp2)
- CHAPTER-7 Summary and Conclusion / (0128.jp2)
- Appendix-A / (0132.jp2)
- Appendix-B / (0133.jp2)
- Acknowledgement / (0136.jp2)
- List of publications / (0137.jp2)