Characteristics of Balance-Unbalance Conversion Factor and Radiated Emission for Differential Type Microstrip Lines with Partial Unbalance(Printed Circuit Boards, <Special Section>2004 International Symposium on Electromagnetic Compatibility)
-
- FUJIYOSHI Ken
- Musashi Institute of Technology
-
- SHIGENAGA Masatake
- Murata Manufacuturing Co., Ltd.
-
- MIYAZAKI Chiharu
- Information Technology R&D Center, Mitsubishi Electric Corporation
-
- TOKUDA Masamitsu
- Musashi Institute of Technology
この論文をさがす
抄録
In this paper, a balance-unbalance conversion factor (TCTL : Transverse Conversion Transfer Loss, TCL : Transverse Conversion Loss) and a radiated emission for differential type microstrip lines with a partial unbalance on a PCB (Printed Circuit Board) are investigated. As the result, after inserting an unbalance element, it can be seen that a radiated emission increased according to the deterioration of TCL. The calculated results of the TCTL and TCL by using 4-terminal pair network chain matrix agreed with the measured results very well. In order to calculate radiated emission from the differential type microstrip lines, a common mode current on differential type microstrip lines with a partial unbalance was calculated by using 4-terminal pair network chain matrix. The calculated results of the radiated emission also agreed with the measured results.
収録刊行物
-
- IEICE transactions on communications
-
IEICE transactions on communications 88 (8), 3200-3206, 2005-08-01
一般社団法人電子情報通信学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1572543026355042688
-
- NII論文ID
- 80017420655
-
- NII書誌ID
- AA10826261
-
- ISSN
- 09168516
-
- 本文言語コード
- en
-
- データソース種別
-
- CiNii Articles