Aluminium alloys : their physical and mechanical properties : proceedings of the 7th International Conference ICAA7, Charlottesville, Virginia, April 9-14, 2000

著者

• International Conference Aluminium Alloys
• Starke, E. A.
• Sanders, T. H.
• Cassada, W. A. (William A.)

書誌事項

Aluminium alloys : their physical and mechanical properties : proceedings of the 7th International Conference ICAA7, Charlottesville, Virginia, April 9-14, 2000

editors, E.A. Starke, Jr., T.H. Sanders, Jr., and W.A. Cassada

（Materials science forum, v. 331-337）

Trans Tech Publications, c2000

• set
• pt. 1
• pt. 2
• pt. 3

注記

Includes bibliographical references and indexes

内容説明・目次

内容説明

Volume is indexed by Thomson Reuters CPCI-S (WoS). This 3-volume set presents the proceedings of the seventh International Conferences on Aluminum Alloys: Their Physical and Mechanical Properties. The papers are concerned with the current views of the world's aluminum experts on the basic understanding and application of aluminum alloys. The proceedings cover a wide range of related topics and present the views from both academia and industry. Topics include casting and solidification processing; ingot and billet processing; recovery, recrystallization and texture development; phase transformations; joining; mechanical properties; physical properties; and alloy and product development. Papers also address experimentation and modeling of the physical and mechanical properties of aluminum alloys. A broad range of material applications, including transportation, packaging and building and construction are considered.

目次

• Trends in Automotive Applications for Aluminum Metallurgical Design of Alloys for Aerospace Structures Mechanical Metallurgy of Aluminium Alloys for the Beverage Can Glass Formability in Al-based Multinary Alloys Modelling Hot Deformation and Textures of Aluminium Alloys Current Status in High-Strain-Rate Superplasticity in Japan Aluminum Metal Matrix Composites Today Early Stage Phenomena and Role of Microalloying Elements in Phase Decomposition of Aluminum Alloys Predicting the Structural Performance of Heat-Treatable Al-Alloys Significance of Thermomechanical Processing in Determining Corrosion Behavior and Surface Quality of Aluminum Alloys A New Paradigm in the Design of Aluminum Alloys for Aerospace Applications Development of the Coarse Intermetallic Particle Population in Wrought Aluminium Alloys During Ingot Casting and Thermo-mechanical Processing Primary Solidification in Aluminum Alloys under Melt Overheating Impact of As-Cast Structure on Structure and Properties of Twin-Roll Cast AA8006 Alloy A Novel Approach to Assessing the Hot Tearing Susceptibility of Aluminium Alloys Internal Crack in DC Casting Billet of High Strength Al-Mg-Si Alloys Particle Size Distributions in a DC-Cast and Rolled AA3104 Alloy High-Speed Roll Caster for Strip Casting of Aluminum Alloy Comparison of Recrystallization Behavior of Direct Chill Cast and Strip Cast AA3004 Aluminum Alloys Pore Characterization in a Model Cast Aluminum Alloy and its Quantitative Relation to Fatigue Life Studied by Synchrotron X-Ray Microtomography Fatigue Mechanisms of a Model AlSi7Mg0,3 Cast Aluminum Alloy Behavior of Hydrogen in Superheated Aluminum and its Alloys Melt Solidification Behavior of AA6111 Automotive Alloy Microstructural Effects on the Strength-Ductility Relationship of Al-7Si-Mg Casting Alloys A Comparative Study of the Precipitation Sequences in Two AlSi7Mg Casting Alloys and their Composites Reinforced by 20 % Al2O3 Discontinuous Fibres Metallurgical Aspects of Thixoforming of AlMgSi - Wrought Alloys Effect of Mechanical Stirring on Semi-Continuous Casting of an Al-5.5%Zn-2.5%Mg-1.5%Cu Alloy Development of Non-Dendritic Microstructures in AA6061 Cast Billets Effect of Grain Refiner on Intermetallic Phase Formation in Directional Solidification of 6xxx Series Wrought Al Alloys Mechanical Behaviour of 319 Heat Treated Thixo Cast Bars Microstructural Observations of Cracking in AA5182 at Semi-Solid Temperatures Grain Formation in AlSi7Mg0.35 Foundry Alloy at Low Superheat Influence of Mg Content on the Microstructure and Solid Solution Chemistry of Al-7%Si-Mg Casting Alloys During Solution Treatment Melt Treatment of A357 Alloy by Flux Injection The Effect of the Melt/Mould Interface upon the As-Cast Surface Solidification Microstructure of Al4.5wt%Cu Hardness-Strength Relationships in Cast Al-Si-Mg Alloys The Influence of Gravity on the Composition of Directionally Solidified Al-In Hypermonotectic Binary Alloy Heredity of Hydrogen in Al Alloys during Melting Process Influence of Process Parameters on the Microstructure in the Strip Casting Process A Surface-Oriented Fluid and Thermal Micro-Model of a Strip Casting Process The Relationship of the Inclusions and Hydrogen Content in the Molten Aluminum Alloys Change of Fluidity of Aluminum Superalloy 1151 (Al-Cu-Mg) During its Alloying by Transition Metals The Simulation of the Viscosity of Liquid Aluminum using the Tight-Binding Potential Medium Range Order and Microstructure of Al-1% Fe Alloy Structures of Liquid Al-Si Alloy Modified by Sr Solidification Behavior of Al-18%Si Alloy under Direct Magnetic Field Effect of Strontium Modification on Hydrogen Content and Porosity Shape of Al-Si Alloys The Size Sudden Change and Structure Evolvement of the Macro-grains of Al-Si Alloys Electromagnetic Stirring and the Cleanness of AlTiB Master Alloys Formation and Prevention of Snow-shaped Speckles on the Worked-face of Al-Si Alloys A New Grain Refining Technique for Pure Al by Addition of Molten AlTiB Master Alloys Grain Refinement of Cast Al Alloys by Al-B Master Alloy Effect of Low Frequency Mechanical Vibration on Structure and Properties of Al-20% Si Alloy Microstructural Evolution of Aluminium-Magnesium Alloys during Thermomechanical Processing Practical Application of Modeling in the Industrial Sheet Production Influence of Strain Path on Forming Limit Strains in Aluminum Hot Workability of High Strength 6060 Alloy Significance of Deformation Mode in Hot Deformation Hot Workability of the 2618 Aluminium Alloy Creep Age Forming of 2024A, 8090 and 7449 Alloys Reactive Spray Deposited and Thermomechanically Processed Al-Mg-Mn Alloys Structure Analysis of 3104 Aluminium Alloy Applied to Deep Drawing Stationary Stage of Hot Deformation and Superplasticity of Aluminium Alloys Control of Grain Structure through Transition Elemental Additions in an Al-Li Base Alloy Improving the Forming Characteristics of Aluminium Sheets for Aerospace Applications Microstructural and Mechanical Characterization of Shear Formed Aluminum Alloys for Airframe and Space Applications Aluminum Hollow Sphere Processing Deformation Properties of Al-Mg Alloy 5086 in Laboratory and Explosive Tests Lubricant Applying Effect in Ductile Metal Cutting Nucleation, Growth and Coarsening of Spherical Precipitates in Aluminum Alloys Production of Ultrafine Microstructures in Al-Sn, Al-Sn-Cu and Al-Sn-Cu-Si Alloys for Use in Tribological Applications Mechanical Response of AA7075 Aluminum Alloy over a Wide Range of Temperatures and Strain Rates Adaptive Numerical Modelling of Commercial Aluminium Plate Performance Alloy 5005: Hot Workability in Relation to Other Al-Mg Alloys Microstructural Evolution of the Deformed State during Severe Deformation of an ECAE Processed Al-0.13%Mg Alloy Industrial Verification of Microstructural Models for Thermomechanical Processing by Application to Hot Rolling of AA3104 Modelling the Work Hardening in Cold Rolled and Annealed Aluminium Sheet Linking Plane Strain Compression Tests on AA6063 to Laboratory Scale Extrusion via Constitutive Equations The Effect of Chemical Composition and Microstructure on the Flow Stress during Hot Deformation of Aluminium Alloys Improvement Methods of Bending Accuracy for 6000 Series Aluminum Alloy Extruded Shapes in Press Bending Characterization of Bendability in Automotive Aluminum Alloy Sheets Aluminum Quenching Technology: A Review Effects of Zirconium Addition and Solute Iron Concentration on the Softening Behavior of 6101 Aluminum Conductor Alloy Hot Deformation to High Strains
• Microstructure, Texture and Flow Stress Behaviour Factors Affecting Grain Refinement in Equal-Channel Angular Pressing Highly Efficient and Energy-Saving Production Technology of Wires of Different Profiles Study of the Damage of AA 8006 Twin-Roll Cast Thin Sheets during Forming of Heat Exchanger Fins High Feed Rate Drilling of Aluminum Alloy Formability of Al-Mg Alloy at Warm Temperature Taper Spinning of Circuler Tube Ironing on Circular Tube for Reduction of Weight Retrogression and Reaging of 7075 T6 Aluminum Alloy Alternate Heat Treatments of C458 Aluminum Lithium Alloy The Effect of Processing Parameters on the Mechanical Properties and Distortion Behavior of 6061 and 7075 Aluminum Alloy Extrusions Effects of Quenching Conditions on Two-Step Aging Behavior of Al-Mg-Si Alloys Extrusion with Changing on Inside Diameter of Circular Tube Microstructural Development in Aluminium Alloys AA1050 and AA3103 - Characterisation and Modelling of Cold Rolled and Annealed Samples The Connection between Recovery and Glide Type in Aluminum and Al-Mg The Effect of Dispersoids on the Recrystallization Behavior of a High-Purity Al-1.3 Mn Alloy Property Anisotropy in Magnesium Containing Aluminium Alloys Fine Recrystallized Grain Structure by Dispersion of Eutectics in Al-Fe-Mn Alloy Large Strain Deformation Textures and Microstructures of an Al-Mg-Si Alloy Hot Deformation Microstructures of Al-1%Mn Single Crystals On Parameters Related to Continuous and Discontinuous Recrystallization and Subsequent Grain Growth Rolling and Recrystallization Textures in Al-Si Alloys The Temperature Compensated Time Concept as a Tool for the Modelling of Aluminium Alloys Experimental Investigation of Particle Break-up during Cold Deformation of Non Heat Treatable Aluminium Alloys Development of Deformation and Recrystallization Orientations during Hot Rolling of Al-4.5Mg Alloy The Effect of Initial Orientations on Recrystallization Textures in Aluminum Alloy 3004 Influence of Extrusion Parameters on Microstructure and Texture of AlSi25Cu4Mg1 Influence of Hot Deformation Parameters on Texture and Earing Behaviour of AA5005 Effect of Scandium on Recrystallization of Aluminum and its Alloys Recrystallization Performance of AA7050 Varied with Sc and Zr Recrystallization of Extruded Profiles - Centre and Surface Areas Fine Grain Structure of High-Mn Aluminum Alloy Sheets Microtextural Evolution during Superplastic Deformation in AA8090 Al-Li Alloy Cube Texture in A3004 Alloy Sheet Processed by Partial Annealing and Light Rolling Method Differences in Structure Evolution of Twin-Roll Cast AA8006 and AA8011 Alloys during Annealing Effect of Cu and Zn Addition on the Hot Deformation Behavior of Al-5.5wt.%Mg Alloys Grain Structure Control of Flat Extruded AA6082 Alloy Effect of Rolling Orientation on the Mechanical Properties and Crystallographic Texture of 2195 Aluminum - Lithium Alloy Effect of Si Content on Texture Development in Al-Mg Alloys The Effect of Small Particles during Recrystallization of Cold Worked AA6061 and AA7032 Aluminium Alloys Texture and Grain Structure of Al-Li-Mg-Zr-Sc Alloy Sheets Refinement of Recrystallized Grains in Al-Mg Alloys Induced by Super-High-Reduction Rolling and Consequent Annealing Formation of nm-Size Dispersoids from Supersaturated Solid Solutions of Aluminium Modelling of the Transition Kinetics in Al-Alloys Characterization of Aluminum-Beryllium Alloy Sheet Al-Li Alloy 1441 for Fuselage Applications Development of Non-Heat-Treatable Automotive Aluminum Sheet Alloys Russian Aluminum Alloys for Aerospace and Transport Applications Interaction between '-Al2Cu and Al3Sc in the Heterogeneous Precipitation in an Al-Cu-Sc Alloy Monitoring the Precipitation Reactions in a Cold Rolled Al-Mn-Mg-Cu Alloy using Thermoelectric Power and Resistivity Measurements Contribution of Al3Sc to Recrystallization Resistance in Wrought Al-Sc Alloys Distribution of Mn- and Cr-Containing Dispersoids in Al-Mg-Si-Alloys Precipitation in Deformed Al-Fe and Al-Fe-Si Dilute Alloys AlMgSc Alloys for Transportation Technology On the Origin of the High Resistance to Coarsening of Plates in Al-Cu-Mg-(Ag) Alloys Using Z-Contrast Microscopy Electrical Conductivity Variations in X2096, 8090, 7010 and an Experimental Aluminium Lithium Alloy Observations of the Effect of Zn on Precipitation Processes in an Al-Cu-Mg-Ag Base Alloy T6 and T78 Tempers of AA6065 Alloy: A Quantitative TEM Study HRTEM Observation of G.P. Zones and Metastable Phase in Al-Mg-Si Alloys Electrical Resistivity Studies on the Precipitation Behaviour of AA6111 Structural Phase Transition in Al-Cu-Mg-Si and Al-Mg-Si Alloys: Ordering Mechanisms and Crystallographic Structures Influence of Guinier-Preston Zone Formation on Plastic Instabilities in Depth Sensing Indentation Tests The Growth Morphology and Nucleation Mechanism of Primary Ll2 Al3Sc Particles in Al-Sc Alloys HRTEM Observation of GP Zones in Al-Ag Alloy DSC Investigation of Natural Ageing in High-Copper AlCuMg Alloys Determination of Vacancy-Sc Interaction Energy by Electrical Resistivity Measurements The Effect of Sc on the Formation and Growth of PFZ in Al-Li Alloys Sequence of Precipitation of T2 and Phases during Ageing of Al-Li Alloy 8090C The Heat Treatment of Al-Cu-Li Alloys Ensured the Stability of Structure and Properties at Long Low Temperature Exposure Effects of Cu on Precipitation in Al-Zn-Mg Alloys Mechanism of Nucleation and Precipitation in Li Containing Al-Zn-Mg-Cu Alloys Influence of Cd and Sn on the Kinetics of the GP Zones Formation in Al-Zn-Mg Analysis of Precipitation and Dissolution in Overaged 7xxx Aluminium Alloys using DSC Hardening and Defect Structures in Thermomechanically Processed Al-2.5Cu-1.5Mg (wt.%) Alloy A DSC and TEM Study of Precipitation in T1 and T4 Treated Al-Mg-Si Alloys Decomposition of Solid Solution of the AA5083 Alloy upon Exposure to Elevated Temperatures Effect of the Solutionizing Treatment on the Precipitation Sequence during Ageing of an Al-4.22wt.%Mg-0.58wt.%Cu Alloy Recent Improvement in High Strength Thick AA7050-Plate 'Sc Effect' of Improving Mechanical Properties in Aluminium Alloys The Application of the Solute Sweeping Model for Grain Boundary Liquation during Welding and Sub-Solidus Annealing of an Al-Cu Alloy High Resolution Elemental Maps of Precipitates in Al-Mg-Si Alloy by EFTEM Effects of Excess Si, Excess Mg and Fe on Precipitation in 6061 Aluminum Alloys during Recycling Process Al-X (X=Nb, Cr, Fe) Ultra-High Strength In-Situ Composite Wire Processing Map for Hot Working AA2024 Composites Reinforced with SiC Particle Feasibility of Synthesising Lightweight Nanophase Al Materials by Mechanical Alloying Crystallisation in Amorphous AlDy(Ni, Co)-Alloys Effect of Mg Addition on the Structures and Mechanical Properties of Rapidly Solidified Al-Transition Metal Alloys A Study on the Ageing Behaviour of Al / SiCP Composites Fabrication and Refinement of 6061(p)/6063 Aluminum Laminate by Accumulative Roll-Bonding (ARB) Process Influence of Ultrafine Ceramic Reinforcement on the Microstructure and Properties of Al-Li-Mg Alloys ' Precipitation Kinetics of SiC Particle Reinforced 8090 Al-Li Alloy Extrusion Modelling of Aluminum Particulate Composites Precipitation Sequence of Al2O3/Al-Cu-Mg and Al-Mg-Si Composite Materials The Effect of TM-Additions on Mechanical Properties of High-Alloyed Al-Zn-Mg-Cu PM Alloys Moessbauer Investigation on Phase Transformation in Rapidly Solidified (RS) Al-Fe-V-Si-Nd Nanoalloy In Situ Dispersion of Yttrium and Calcium Oxides in Mechanically Alloyed Al-Y and Al-Ca Alloys Microstructure and Mechanical Properties of 2024Al-Fe-Ni PM Alloys Consolidated by Equal Channel Angular Pressing Impact Behaviour of C A (Glass/Epoxy-Aluminum) Laminates Preparation of Al-Fe-V-Si Nanocrystalline Powders by Double Mechanical Alloying The ALFLOW-Model - A Microstructural Approach to Constitutive Plasticity-Modelling of Aluminium Alloys Mechanical Behavior of Thin Sheets Machined from AA7050-T7451 Plate Influence of Different Minor Additions on Structure and Properties of High-Strength Al-Zn-Mg-Cu Alloy Sheets Neurofuzzy and SUPANOVA Modelling of Structure-Property Relationships in Al-Zn-Mg-Cu Alloys Effects of Damaged Coarse Inclusion Particles on Mechanical Properties of Wrought Aluminum Alloys Effect of Strain State on a Yield Anisotropy Model for Materials Strengthened by Plate-Shaped Precipitates On the Direct Estimation of Ductility from Fracture Surfaces of an Aged Al-Si-Ge Alloy A Finite Element Analysis of Strengthening Effects of Plate-Like Particles in a Metal Matrix Isotropism of Compression Yield Strength in the Deformed Aluminum Alloys Loss of Strength within the Heat Affected Zone of Al-Cu and Al-Cu-Li Alloys Role of Hardening Solutes on the Microstructure and Strength of AA6111 Automotive Alloy Yield Point Elongation in Al-Mg Alloys Improvement in Bake Hardening Response of Al-Si-Mg Alloys Influence of SSTT, Ageing Regime and Stretching on IGC, Complex of Properties and Precipitation Behavior of 6013 Alloy Modelling of Strengthening of Al-Li-Cu-Mg alloys Effect of Precipitates on Plastic Anisotropy of Polycrystalline Aluminum Alloys The Effect of Quench Rate on the Microstructure and Properties of AF/C-458 and AF/C-489 Al-Li-Cu-X Alloys The Role of Mechanical Stretch on Processing-Microstructure-Property Relationships of AF/C 458 Texture / Yield Strength Correlations in Al-Li Near-Net-Shape Extrusions Reduction of Toughness in Aluminium-Lithium Alloys Caused by Long Term Exposure at Low Temperatures Observation of Dislocation Multiple Cutting of the Semicoherent Precipitate in Al-Cu-Mg-Ag Alloy Structure and Properties of 1933 Cruciform Large Fitting Blanks A Study of the Influence of Plastic Strain upon Fractal Dimensional Increment of an Aged Al-Si-Ge Alloy Based on Synthetic Fractal Profiles and Dimple Pattern of Fracture The Precipitation and Mechanical Properties of Al-Li-Mg-Si Alloys Stress Relaxation in Al Alloys of Al-Mg-Mn, Al-Mg-Sc and Al-Mg-Li-Systems Substructure Strengthening in Aluminium Alloys Structure and Properties of Sheets of 1424 Alloy The Structural Integrity of Cast Aluminium Automotive Components Subjected to Fatigue Loads Lessons Neglected: Effects of Moist Air on Fatigue and Fatigue Crack Growth in Aluminum Alloys On the Growth of Small Fatigue Cracks in Two Squeeze-Cast Aluminum Alloys Numerical Modelling of Particle Distribution Effects on Fatigue in Al-SiCp Composites Influence of Mean Strains on the Isothermal Fatigue Behaviour of the Cast Aluminium Alloy AlSi10Mg Reinforced with 15 Vol.-% Al2O3 (Saffil) Short Fibers Microstructural Influences on Fatigue Crack Initation and Early Growth Behaviour in Plain Bearing Al-based Linings Effect of Specimen Surface Layer on Fatigue Strength of an Al-1.2%Si Alloy Fatigue of an Al-Si Gravity Die Casting Alloy Low Cycle Fatigue at Room Temperature of Over Ageing Cast Aluminium Alloys Fracture Mechanism of Dispersion Strengthened Al-Al4C3 Materials Numerical Modelling of Roughness and Plasticity Induced Crack Closure Effects in Fatigue Effect of Temper on Environmental Fatigue Crack Propagation in 7000-Series Aluminum Alloys Fatigue Properties of the Aluminium Alloys 6013 and Al-Mg-Sc Enhanced Creep Resistance in Underaged Aluminum Alloys Creep Strain and Strain Rate Response of 2219 Al Alloy at High Stress Levels On the Influence of Stress and Strain on the Coarsening of Precipitates in Al-alloys under Creep Conditions Deformation and Fracture Behaviors of an Al-Li Alloy under Slow Tensile and Bending Conditions Friction Wear of Commercial Aluminum Alloys Dispersoid and Grain Size Effects on Fatigue Crack Growth in AA2024-Type Alloys Effect of Trace Impurities on Intergranular Fracture of Aluminum Alloys Fatigue and Heat Transfer Behaviour of Shot Penned Aluminium Alloy for Automobile Applications Effects of Variable Amplitude Loading on Fatigue Crack Propagation Behaviour of Microcracks in Al-Zn-Mg-Cu Alloys The Effects of Micro-Texture and ' Particle Distribution on Short Fatigue Crack Growth in an Al-Li 8090 Alloy Nature of Precipitates in Peakaged and in Subsequently Crept Al-Ge-Si Alloy Structural Evolution in the Ageing AlZn4,7Mg1,2 Alloy After Control Heat Treatment and Fatigue Investigation The Plastic Deformation Mechanisms, Strength, and Fracture Behavior of a Precipitation Hardened Aluminum-Lithium-Zirconium Alloy Hydrogen Solubility, Diffusion and Trapping in High Purity Aluminum and Selected Al-Base Alloys Intergranular Hydrogen Trapping in Al-Mg: A Monte Carlo Simulation Hydrogen Permeation through an Al-0.2 at% Mg Alloy Understanding and Modelling the Mechanical and Corrosion Properties of 6056 for Aerospace Applications Environment-Assisted Cracking of Al 2195 Alloy The Electrode Potential Dependence of Environment-Assisted Cracking of AA 7050 The Influence of Microstructure on the Formation of Stress Corrosion Cracks in 7XXX Series Aluminium Alloys The Electrochemistry of (Al2Cu), S (Al2CuMg) and T1 (Al2CuLi) and Localized Corrosion and Environment Assisted Cracking in High Strength Al Alloys Effect of Thermal Exposure on the Corrosion Properties of an Al-Mg-Sc Alloy Sheet Influence of Retrogressing and Reaging on the Stress Corrosion Cracking Resistance of 7010 Hydrogen Effects During SCC Propagation of Al-5Mg in 30g/l NaCl Solutions Effect of Surface on Hydrogen Permeation through Pure Aluminum Intergranular Corrosion and Exfoliation Corrosion Behaviours of Al-Li Alloys The Influence of the Deoxidization on the Aluminum Alloys Corrosion and Environment-Assisted Cracking Behavior of Friction Stir Welded Al 2195 and Al 2219 Alloys The Effect of Microstructure on Intergranular Corrosion Resistance of 6061 Alloy Extrusion Investigation of Cerium Salt/Sulfuric Acid Anodizing Technology for 1420 Aluminum Alloy Friction Stir Welding of High Strength Aluminum Alloys High Resolution EBSD Analysis of the Grain Structure in an AA2024 Friction Stir Weld Processing-Property Correlation in Friction Stir Welds Microstructure of Friction Stir Welded Joints in AA5182 Statistical Tensile Strength Characteristics of Aluminum Alloy Pipe and Steel Pipe Friction Welded Joints The Mechanism of Braze Metal Penetration by Migration of Liquid Films in Aluminium Grain Boundary Melting or Liquid Film Migration in Brazing Sheet Effect of Welding Techniques on Microstructure and Mechanical Properties of Aluminium-Lithium Alloy Welds Microstructural and Mechanical Characterization of a Friction Stir Welded Al-Alloy Welding Phenomena of Aluminum-Copper Alloy in Electron Beam Welding Influence of Weld Simulation on the Microstructure and Fatigue Strength of 2195 Aluminum-Lithium Alloy Liquid Infiltration and the Formation of Ternary Eutectic Mixtures at Grain Boundaries during Welding of Aluminum-Copper Alloys using Aluminum Silicon Filler Metal Transition Metal Small Additions Effect on Hot Shortness of High-Temperature Weldable Alloy 1151 (Al-Cu-Mg) Fatigue of Friction Stir Welded AlMgSi-Alloy 6082 Simulation of the Bending Process of an Aluminum-Rubber Profile

「Nielsen BookData」 より

詳細情報

• NII書誌ID(NCID): BA71842984
• ISBN:
  • 0878498532
• 出版国コード: sz
• タイトル言語コード: eng
• 本文言語コード: eng
• 出版地: Uetikon-Zuerich, Switzerland ; Enfield, N.H.
• ページ数/冊数: 3 v. (xxvi, 1818 p.)
• 大きさ: 25 cm
• 件名:
  • LCSH : Aluminum alloys -- Metallurgy -- Congresses
  • LCSH : Aluminum alloys -- Mechanical properties -- Congress
• 親書誌ID:
  • BA00294222