Advances in materials science : selected, peer reviewed papers from the International Conference on Advances in Materials (ICAM 2014), December 13-14, 2014, Shanghai, China
著者
書誌事項
Advances in materials science : selected, peer reviewed papers from the International Conference on Advances in Materials (ICAM 2014), December 13-14, 2014, Shanghai, China
（Advanced materials research, v. 1088）
Trans Tech Publications, c2015
- : pbk
大学図書館所蔵 件 / 全1件
-
該当する所蔵館はありません
- すべての絞り込み条件を解除する
注記
Includes bibliographical references and indexes
内容説明・目次
内容説明
Collection of selected, peer reviewed papers from the International Conference on Advances in Materials (ICAM 2014), December 13-14, 2014, Shanghai, China.
The 167 papers are grouped as follows:
Chapter 1: Nanomaterials and Nanotechnologies;
Chapter 2: Thin Films;
Chapter 3: Metal-Based Materials, Alloys and Metallurgical Technology;
Chapter 4: Crystallography, Chemical and Cathode Materials;
Chapter 5: Polymers and Composite Materials;
Chapter 6: Biomaterials and Biotechnologies;
Chapter 7: Materials and Technologies in Environmental Engineering;
Chapter 8: Building Materials and Technologies;
Chapter 9: Research in Area of Applied Materials;
Chapter 10: Processing Technologies and Computational Methods in Area of Materials Science
目次
Preface, Technological Committees and Sponsors
Chapter 1: Nanomaterials and Nanotechnologies
Application of the Nanostructured Carbon Coatings for Improvement of Functional Properties of Medical Polyurethanes
The Dispersion of MWCNTS in Acetone Solution of SAN
Removal of Paraquat from Aqueous Solutions Using Multi-Walled Carbon Nanotubes: Kinetic, Isotherm and Thermodynamic Studies
Effect of Nanostructured Oxide Coatings on Tensile Properties of Cast Pure Magnesium
Multifunctional NaYF4:Yb3+, Er3+@Au Nanocomposites: Upconversion Luminescence, Temperature Sensing and Photothermal Therapy
Comparative Studies for the PAMAM/RE and HPAE/RE (RE=La, Nd, and Eu) Based on Molecular Dynamics Simulations
Facile Synthesis and Photocatalytic Properities of Mini Nanoparticle CdS Quantum Dots/Boron and Nitrogen Co-Doped TiO2 Transparent Photocatalyst Emulsion
Nanomagnetic Particle Anchored to Monodispers Porous Microspheres for Pectinase Immobilization
Effect of Noble Metal Nanoparticles in SERRS Measurements of Water-Soluble Porphyrins
In Situ TEM Manipulation and Property Study of Cd2Ge2O3 Nanowires
Structures and Performances of PA6/PVA Nanofibers Membranes from Electrospinning
A Simple Solvothermal Synthesis of Spherical Y2O3:Eu3+
Antibacterial Potential of Silver Nanoparticles Capped with Poly(4-styrenesulfonic acid-co-maleic acid) Polymer
Chapter 2: Thin Films
Synthesis, Characterization and Thermal Properties of SiO2/Pi Composite Film
Fabrication and Characterization of Al/Ni Multilayer Films
SiO2ZrO2 Thin Films as Low Temperature NO2 and O3 Sensors
Preparation and Characterization of Cd1-xZnxS Thin Films with Chemical Bath Deposition
Synthesis and Characterization of Au-CdS Composite Thin Films for Photoelectrochemical Sensing of Hg2+ Ions
Highly Transparent Flexible Clay Film with Organized Polymer
Study on Preparation and Surface Properties of Fluorinated Acrylate Hydrophobic Polymer Film
Effect of Thermal Annealing on La2O3 Films Grown by Plasma Enhanced Atomic Layer Deposition
Chapter 3: Metal-Based Materials, Alloys and Metallurgical Technology
Effect of Oxygen Content in Powders on Microstructure and Mechanical Properties of WC-FeAl Composites Fabricated by Vacuum Sintering Technique
Influence of Chlorine Additives on Combustion Rate of Pulverized Coal Injection
Friction Stir Processing of Cast Iron Using Cermet Tool
Welding-Brazing Characteristic in Electron Beam Joining Vanadium Alloy and Stainless Steel
Improvement of Wet Milled TiC-Feal Alloys
Application of Orthogonal Experiments Design to Optimize Process Parameters in the Alloy Heat Treatment
Study on Clinching for Similar and Dissimilar Titanium Alloy
The Effect of Enhanced Solution Treatment on Microstructures and Properties of 6013 Type Aluminum Alloy
Heat Transfer and Solidification Model of Slab Continuous Casting Based on Nail-Shooting Experiments
The Influence of Calcium Additive in the Structural Formation of Tungsten via Reduction Reaction
High-Temperature Corrosion of Carbon Steel in Air, Ar/0.2%SO2, and N2/0.4%H2S Gases
Environmental Effects on Electrochemical Behaviors of Materials of a Dissimilar Metal Weld Exposed to High Temperature Primary Water of PWR Nuclear Power Plants
Research on Microstructure and Properties in Welded Joint of 700 MPa Grade Low Carbon Micro-Alloy Steel
Tensile Properties of Squeeze Cast Mg-Al-Sr Alloy under Applied Pressures
Hot Deformation Behavior of Q235 Steel during Isothermal Compression at Elevated Temperature
Effect of Holding Time on Microstructures of AZ91D Alloy by the Semi-Solid Thixo-Extruded Process
XRD, STEM, and Tensile Properties of AISI S1 Tool Steel after Deep Cryogenic Treatment
Research on the Morphological of Lead and Zinc in the Smelting Slag
Cold Crystallization Behaviour of a Commercial Zr44-Ti11-Cu10-Ni10-Be25 Metal Glassy Alloy
Lab Scale Synthesis of Al-Sc Alloys in NaF-AlF3-Al2O3-Sc2O3 Melt
The Microstructure Evolution of a Nickel-Base Single Crystal Superalloy after Long-Term Aging
Microstructure and Mechanical Properties of As-Cast and As-Extruded Mg-Gd-Er-Zn-Zr Alloy
The Compressive Behaviors of the Mg-Zn-Er Alloy Containing I-Phase
Grain Refinement of High-Iron Aluminum Alloy by Inoculation with Al-B Master Alloy
Interfacial Energy Anisotropy Affecting Dendrite Growth of Magnesium Alloy
A New Al-ZnS Master Alloy Designed for Modifying Hypereutectic Al-Si Alloy and its Refinement Performance on Primary Si
Creation of Submicroporous and Nanoporous Structures in Metallic Materials by Laser Thermocycling as Eutectic Is Reached
Electrolytic Aluminizing of Low-Carbon Steel in NaF-KF-AlF3 Melt
Fracture Toughness and Hardness of Ti(C0.7N0.3)-19Mo2C-xNbC-24Ni
Influence of Solid-Liquid Composite Casting on Interface and Microstructure of High Chromium Cast Iron
The Effect of Forming Speed on the Formability of a Zr-Based Bulk Metallic Glass
Chapter 4: Crystallography, Chemical and Cathode Materials
Development and Application of Manganese Cobalt Lithium Compounds in the Field of Lithium Batteries
Bi-(2, 4-dihydro-2H-3-(4-N-maleimido) phenyl-1,3-benzoxazine) Isopropane: Molecular Structure, Optical Spectrum and Thermodynamic Properties
Preparation of HA Hydrogel by Click Chemistry
Synthesis and Properties of Functionalized Sulfur-Containing Hexa-Peri-Hexabenzocoronene
Morphology of Cobalt Oxalate Powders Prepared with Pulsed Electromagnetic Field
Synthesis of Spherical and Fine Cobalt Powders from Cobalt Oxalate
Synthesis, Crystal Structure and Characterizations of a Novel Open-Framework Lanthanide Imidazoledicarboxylate
Hydrothermal Synthesis and Structure Characterization of Two Hybrid Metal Phosphonates Materials
Hexacarboxylate-Bridged Dicopper (II) Paddle-Wheel-Based 3-D Metal-Organic Framework: Synthesis, Structure
Study on Pyrolysis Behavior of Polybenzoxazine by PyGC-MS
Substituent Group Effete on the Geometric Configurations of the Acyclic Ruthenium Bipyridine Imidazole-Cyanide Anion Recognition Systems
Co-Effect of AlF3 and MgF2 Coating on the Electrochemical Performance of LiNi1/3Co1/3Mn1/3O2 Cathode Material under High Voltage
Novel Sorbents and their Sorptive Properties for Mercury Emissions Control of Coal-Fired Flue Gas
V10O28-6 Cluster Compound, a Promising Cathode Material for Li Ion Battery
Thermal Oxidative Degradation Behavior of Fluorinated Thermotropic Liquid Crystal Copolyesters
Studies of Reaction Kinetics of Catalytic Hydrogenation of Isophthalonitrile for Meta-Xylenediamine Preparation
Optimization of the Coagulation Process for Kaolin and Humic Acid Removal Using Polymeric Aluminum Ferric Sulfate
Mono-Component-Solution Controlled Growth of Microarc Oxidation Coatings on Aluminum Substrates
Simple, Efficient, and Selective Synthesis of Phthaloylserine and Phthaloylthreonine
Solvent-Free Green Synthesis of 4-amino-5-substituted-1,2,4-triazole-3-thione by Grinding
Study on Different Synthesis Methods of Spherical YAG:Ce3+ Phosphor and its Luminescence Properties
Ce-Doped ZnO Based Fast Response UV Photoconductive Detector
Surfactant-Based Fluorescent Quantum Carbon Dots: Synthesis and Application
The Interactions with Proton-Donor Solvents and Stability of some Borondipyrrinates
Receiving and Research of Diamond-Like PVD-Coating
Quality Technological Properties of Foundry Exhaust Dust as Alternative Ceramic Coating Raw Materials
Chapter 5: Polymers and Composite Materials
Investigation of the Elastic Modulus Effect on Free Vibration Characteristics of Fiber Reinforced Polymer Composite Beams Made of Various Fundamental Shapes
Evaluation of a Plastic Composite Produced with Residues of Sugarcane Bagasse and Polypropylene without Additives
Influence of Portland Cement Addition in the Physical and Mechanical Properties of Epoxy Resin
Resin-Wood Particulate Composite Reinforced with Piassava Fibre
Structure and Properties of Melamine Formaldehyde/Polyvinyl Alcohol (MF-PVA) Composite Fiber by Electrospinning
Study on Melamine Formaldehyde/Polyvinyl Alcohol Blend Fiber by Electrospinning
Silicon Electrodeposition on Glassy Carbon, Silver, and Tungsten Substrates
Synthesis of Polypropylene Strong Acid Cationic Exchange Fiber
Study on the Phenolic - Epoxy Resin System
The Performance Study of Waterborne Damping Coating
Preparation and Characterization of Modified Polylactic Acid-co-Polyethylene Glycol-co-Polylactic Acid Microcapsules Enclosing Cypermethrin
Study on Environmental-Friendly Waterborne Polyurethane Flame-Retardant Coating Polyester Fabric
Study on the Modification of Waterborne Polyurethane by Tung Oil Anhydride-Ester Polyol
Modification of Unsaturated Polyester Resin by Methyl- -Eleostearate-Maleic Anhydride Adduct
Hyperbranched Triazine Compounds Grafted Carbon Nanotubes for Improved Tribological Performance of Bismaleimides Composites
Chapter 6: Biomaterials and Biotechnologies
Effect of Nanocrystallized Hydroxyapatite Coating on Bone Healing Evaluated by Synchrotron Radiation Diffraction
New Biomimetic Hybrid Nanocomposites for early Fixation Prostheses
Synthesis and Photophysical Property of Polyion Complex Micelle Incorporating Phthalocyanine Zinc(II) Bearing Benzyl Ether Dendritic Substituents with Nitro-Terminal Group
The Study of the Effect of Concentrated Growth Factors (CGF) on the New Bone Regeneration of Immediate Implant
Fermentation Production of Succinic Acid from Sucrose by Engineered Escherichia Coli JH208
Synthetic Small Molecules Targeting G-Quadruplexes and their Application
Effect of Bone Composition on the Fracture Toughness of Cortical Bone
Color Stability of Heat-Cured Denture Base Resins
Formulation and Technology Study on the Taste Masking Granules
Chapter 7: Materials and Technologies in Environmental Engineering
Adsorption of 2,4-Dichlorophenol and Rhodamine-B from Aqueous Solutions onto Activated Carbon Derived from Phragmites Australis
Hydrothermally Synthesized Magnetically Separable RGO Supported Nanocomposite for Water Purification
Researching on a New Grouting Material and its Engineering Application
Study of Combustion of Different Biomass and its Atmospheric Emissions
Approaching Capacitive Deionization (CDI) on Desalination of Water and Wastewater - New Progress and its Potential
The Evaluation of the Concentration of Benzo[a]Pyrene in the Air of Moravian-Silesian Region (Czech Republic) during Winter and Summer Seasons
Cu-Supported on Sodium-Treated Sepiolite for Selective Catalytic Reduction of NO by Propylene
Advances in Wastewater Treatment of Waste Metal Cutting Fluid
Speciation Analysis of Antimony and Arsenic in Soil and Remediation of Antimony and Arsenic in Contaminated Soils
Selected Physical and Mechanical Properties of 2-Ply Bamboo Laminated Lumber with Modified Phenol Formaldehyde
The Influence of Different Carbon Sources for Polyhydroxyalkanoates Storage
An Experimental Study on Ammonia-Nitrogen Removal from Waste Water with Modified Absorbent
Chapter 8: Building Materials and Technologies
Evaluation of the Tensile Modulus of Elasticity in Parallel Direction to the Grain for Eucalyptus grandis Wood Specie
Experimental Research on Alkaline Residue Concrete Dry Shrinkage Performance
Influence of Fly Ash on Microstructure of Complex Binder Pastes
Experimental Study on Effects of Mechanical Properties of Lytag Concrete
Apply for RC Beams and Slabs Strengthened with New Inorganic Adhesives Sticked FRP Sheets
Basic Mechanical Properties Research of SAE Latex-Modified Mortar
The Research of the River Silt as Road Subgrade Filling Materials in Big City
Anatomical Description of Guanandi Wood, from Pure Plantation, and its Use as Building Material
Influence of Time Evolution in the Modulus of Elasticity of Concrete Reinforced by Carbon Fibers
Particleboard Manufactured with Variation of Press Time
Influence of the Addition of Coffee Husk in Physical Properties of Bamboo Particleboard
Physical and Mechanical Characteristic of Particleboards Produced with Residues of Sugarcane and Stem Leaves of Bamboo Bonded with Castor Oil Adhesive
Characterization of Medium Density Particleborads Using Agricultural Residues
Post-Fire Study of Strength and Stiffness of a Wooden Roof Structure
Effect of Drying Methods in the Resistance Strength Compression Parallel Test for Bamboo
Influence of the Number of Load Cycles to Obtain the Stiffness Properties of Angico Preto (Anadenanthera macrocarpa) Wood Specie
Particleboard Manufactured with Bamboo and Coconut Fibers in Different Ratios of Adhesive
Evaluation of the Moisture Content in Stiffness Properties of Structural Glulam Beams
Moisture Content and its Influence on the Roughness and Noise Emission during Wood Machining
MDP Panels Manufactured with Hevea Brasiliensis Overlaid with Bamboo Foil of Phyllostachys Edulis
Poisson's Ratios for Wood Species for Structural Purposes
Chapter 9: Research in Area of Applied Materials
Analysis on Causes of Corrosion in the Sleeve Joint of Certain Offshore Pipeline System
Ion Plating Plasma Assisted SiO2 and TiO2 Protective Nano-Coatings for Antique Ceramics Preservation
Study on Influence to the Ceramic Glaze Color of Environmental-Friendly Pottery Brick by Low-Carbon Catalytic Combustion Furnace of Natural Gas
Influence of CrCN Coatings Steel Ball Deposited by Closed Field Unbalanced Magnetron Sputtering on the Performance of Bearing
Structural Optimization of Laminated Glass Plate Using Discrete Element Method
Study on Carbocoal as Microwave Absorber in Microwave Field
Chapter 10: Processing Technologies and Computational Methods in Area of Materials Science
Effects of Extrusion Speed on the Deformation of Copper Using ECAP Based on FEM
Research on Performance of Drilling Carbon Fiber Reinforced Plastics with Diamond Coated Special Drill
Thermal Simulation Study on Copper Cooling Stave of Blast Furnace
The Process Optimization of Cast Copper Stave Based on ProCAST
Effect of Surface Roughness on the Shear and Tensile Strength of Hardwood Adhesive Joints: A Linear Elastic Model
Shear Stress Discontinuities in Adhesive Joints
Comparisons of Linear and Nonlinear FEA of Adhesively Bonded Beams
Effect of Adhesive Behavior on Normal Stress Distributions in the Single-Lap Adhesive Joints
Research Concerning the Influence of Contact Tip-to-Work Distance (CTWD) on Penetration, Bead Height, Bead Width - Study Case GMAW Cladding
Experimental Study on the Surface Cutting Mechanical Properties of Single Crystal Silicon in Micro-Nano Scale
Effect of Parapet Hole on Tundish Flow Field
Effect of Turbulence Inhibitor on the Molten Steel Flow in Tundish
Energy Saving for Distillation Process of Mixture with Wide-Boiling Range via T-Q Graph
The Influence of the Welding Current Polarity on the Geometric Configuration of the Bead
Simulation of Drying Heveabrasiliensis Wood
The Influence of Welding Parameters on Heat Transfer Efficiency of Hybrid Pulsed Nd: YAG/GTAW Welding
Using Methods of Multi Scale Modeling for Investigation of Sample Defects
A Study on Image Processing Algorithms for Seam Tracking System in GMA Welding
A Study on Modified Hough Algorithm for Image Processing in Weld Seam Tracking System
Affect of Casing Eccentricity on Stress at the Cement Ring Interface
Simulation of Temperature Field in the Solidification Process of Cast
Analysis of Sectional Girder Flexion Calculate of Tapered Canal Bi-Material
Study on the Promotion Effect of Microwave-Metal Discharge on the Microwave Pyrolysis of Electronic Waste
Nonlinear Dynamic Finite Element Programming Design of Different Material Model
Deformation Behavior Analysis of Harmonic Structure Materials by Multi-Scale Finite Element Analysis
Finite Element Analysis of Anchorage Structure for FRP Tendon
「Nielsen BookData」 より
