Design and development of sustainable manufacturing systems : selected, peer reviewed papers from the Electronic and Green Materials International Conference (EGM 2015), the Engineering Technology International Conference (ET 2015), the Green Design and Manufacture International Conference (GDM 2015), July 31-August 1, 2015, Surabaya, Indonesia
Author(s)
Bibliographic Information
Design and development of sustainable manufacturing systems : selected, peer reviewed papers from the Electronic and Green Materials International Conference (EGM 2015), the Engineering Technology International Conference (ET 2015), the Green Design and Manufacture International Conference (GDM 2015), July 31-August 1, 2015, Surabaya, Indonesia
（Applied mechanics and materials, v. 815）
Trans Tech Publications, c2015
- : pbk
Available at / 1 libraries
-
No Libraries matched.
- Remove all filters.
Note
Includes bibliographical references and indexes
Description and Table of Contents
Description
Collection of selected, peer reviewed papers from the Electronic and Green Materials International Conference (EGM 2015), the Engineering Technology International Conference (ET 2015), the Green Design and Manufacture International Conference (GDM 2015), July 31 - August 1, 2015, Surabaya, Indonesia.
The 82 papers are grouped as follows:
Chapter 1: Advanced Materials and Characterizations
Chapter 2: Design and Research of Sustainable Manufacturing Systems
Chapter 3: Engineering Management of Sustainable Manufacturing Systems
Table of Contents
Preface, Committees & Conference Organization
Chapter 1: Advanced Materials and Characterizations
Effect of Incubation Temperature on Growth of Acetobacter xylinum 0416 and Bacterial Cellulose Production
Thermal Properties of Low Density Polyethylene/Jackfruit Seed Flour Blends-Effect of Hexanedioic Acid
Crystallinity and Influence of Citric Acid as a Compatibilizer in Low Density Polyethylene/Jackfruit Seed Flour Blends
Properties of Ethylene Propylene Diene Monomer/Recycled Acrylonitrile - Butadiene Rubber Blends (EPDM/rNBR): Effect of the Addition of Bamboo Fillers
The Effects on the Cure Characteristics and Physical Properties of Bamboo Activated Carbon Filled Styrene Butadiene Rubber (SBR) Compounds
Performance of Concrete by Using Palm Oil Fuel Ash (POFA) as a Cement Replacement Material
Mechanical and Thermal Properties of Polylactic Acid Filled Rice Straw
The Addition of Imperatacylindrica as Natural Filler in Epoxidized Natural Rubber Filled Recycled Nitrile Glove: Cure Characteristics and Physical Properties
Cure Characteristics and Physical Properties of Imperatacylindrica Activated Carbon Filled SMR L Compounding
Behaviour of Axially Loaded Composite Wall Panel by Using Finite Element Analysis
Effect of Recycled Nitrile Glove (rNBRg) Particle Sizes on Curing Characteristics and Physical Properties of Natural Rubber/Styrene Butadiene Rubber/Recycled Nitrile Glove (NR/SBR/rNBRg) Blends
The Effects of Trans-Polyoctylene Rubber (TOR) on the Properties of Acrylonitrile Butadiene Rubber/Recycled Natural Latex Gloves (NBR/NRL-G) Compounds
Physical and Mechanical Behaviors of SnCu-Based Lead-Free Solder Alloys with an Addition of Aluminium
The Properties of Linear Low Density Polyethylene/Cyperus Odoratus (LLDPE/CY) Blends: Effect of Sodium Hydroxide
Compression Characterization of Polyurethane Foams with Different Formulations of Polyol and MDI
Effect of Heat Treatment on Hardness Behavior of AZ91 and AZ91 Reinforced Carbon Nanotube
Properties of Cement-Based Material Consisting Shredded Rubber as Drainage Material
Study of Covalent/Ionic Cross-Linked Modification on Physical and Mechanical Properties of Chitosan Film as Potential Material in Medical Application
The Effects of Composition on Solid State Sintering of Tungsten-Brass Composites
Effect of Poly(Methyl Methacrylate) (PMMA) on Tensile Properties and Spectroscopy Infrared (FTIR) Characteristics of LDPE/WHF Composites
Effect of Alkali Treatment Using Calcium Hydroxide and the Fiber Length on the Strength of Sugarcane Bagasse Fibers-Polypropylene Composites
Mechanical Properties of Short Fiber and Non-Woven Kenaf Reinforced Polypropylene Composites: Effects of Oil Palm Shell Powder Addition
Superhydrophobicity of Textured Ceramic Coating for Corrosion Protection in Marine Applications - A Brief Review
Study on the Effect of Porous Silicon Sizes for Potential Visible Photodetector
X-Ray Diffraction and Dielectric Constant of Lanthanum Doped Barium Titanate Ceramics
Multi-Layer Microstructure of Sol-Gel Barium Titanate Thin Films for Optical Waveguide Applications
High Throughput Graphene Oxide in Modified Hummers Method and Annealing Effect on Different Deposition Method
A Study of Fire Retardant Effect in Natural Fiber Composite Panels with Magnesium Hydroxide and Zinc Borate as Additives
Rapid Indicators in Detecting Variation of Fly Ash for Making HVFA Concrete
A Preliminary Study on Cracking Tendency of Cement Paste Incorporating High Calcium Fly Ash
Review on the Effect of Bottom Ash in Performance of Portland Cement Mortar
Flood Mud as Geopolymer Precursor Materials: Effect of Flood Mud/Alkaline Activator and Na2SiO3/NaOH Ratios on Compressive Strength
Flood Mud as Geopolymer Precursor Materials: Effect of Curing Regime on Compressive Strength
Thermally Stable Encapsulation Material Based on Green and Red Lanthanide Phosphor for White Light Emitting Diodes
Study on Dielectric and Magnetic Properties of MWCNTs/Polyester Composites
Evaluation of Thermal Properties of the Fe80Cr20 Nanostructure for Interconnect Application in High Temperature
Electromagnetic Wave Attenuation in Lossy Dielectric
The Effect of Different Remazol Dye Concentrations and Soaking Times in Dye-Sensitized Solar Cell
Aligned Carbon Nanofibres (CNFs) at the Graphene/Nickel Thin Film Edge
The Effect of Different Reduction Methods on Conductivity of Reduced-Graphene Oxide (r-GO)
Correlation of Impact Energy from Instrumented Charpy Impact
Chapter 2: Design and Research of Sustainable Manufacturing Systems
Radiation Enhancement Using Circular Split Ring Meta-Surface Mirror for a Small Patch Resonator
Keystroke Dynamics for Construction Industry: A Review on Biometric Systems
3D Stress Analysis of ITER Tokamak Assembly
Circular Split Ring Meta-Surfaces Variation Study as Surface Wave Suppressor
Overview of Artificial Fish Swarm Algorithm and its Applications in Industrial Problems
The Development and Implementation Lean Manufacturing in Indonesian Furniture Industry
Overview of Fuzzy Logic Technique for Modeling Machining Process
Optimization of Surface Roughness in Turning Operation Using Firefly Algorithm
Green Aircraft Technology Imperatives for Environmental Sustainability
Pressure Generated from Head Garment with Padding Insert Used for Hypertrophic Scar Treatment
Buffer Allocation Using 6 Steps Oba Method: A Case Study
Simulation and Experimental Studies on Optimum Barrel Length for High Impact Penetrator
Design Specification Determination with Collaborative Approach for Indonesian Short Wheelbase Recumbent Bicycle
The Satisfaction Preferences Measurement of Profile Design
Mathematical Modelling of Surface Roughness on Tropical Wood Machining Using Response Surface Methodology
Designing a Low Cost Endoskeletal below Knee Prostheses with the Implementation of Appropriate Technology
Mismatch Analysis of Elementary School Desk and Chair Using Monte Carlo Simulation
A Study of Tool Motion in 2 Dimensional Ultrasonic Assisted Micro-Milling
Mega Floats: Floating Offshore Remote Terminal (FORT) towards Sustainability Life Cycle Assessment
Digital All-Pass Filter Modeling Based on Desired Group Delay Using Advanced Material: A Review on the Signal Processing Part
Fiber Length Optimization of Ring Cavity Multi-Wavelength Brillouin Fiber Laser Utilizing Fiber Bragg Grating
Comparative Characteristics between L-Band EDFA, L-Band EDFA Utilising Single FBG and Dual Stage L-Band EDFA Utilising Dual FBG Configurations
All-Optical XOR Logic Gates: Insights and Comparisons
Energy Saving Switched-Mode Regulator in Motorcycle Power Supply
Design and Analysis on Symmetric MEMS Inductor
Extrinsic and Intrinsic Modeling of InGaAs/InAlAs pHEMT for Wireless Applications
Defect Segmentation of Semiconductor Wafer Image Using k-Means Clustering
Optimization of L-Band Ring Cavity Brillouin Erbium Fiber Laser
The Development of Novel High Speed - Low Noise pHEMT Device for Lossless Underwater Optical Communication
High Speed All-Photonic Flip-Flop Operation at a Single Wavelength
Nondestructive Fruit Ripeness Detection System and its Spectral Analyses
Room Access Control System Using Facial Image Recognition
Leak Detection in Gas Pipeline Using Hilbert-Huang Transform
Real-Time Self-Tuning Speed Controller: Performance Comparison between Engine Fuelled with Palm Methyl Esters and Petroleum Diesel
Overview of Harmony Search (HS) Algorithm for Green Manufacturing Industries
Gravitational Search Algorithm for Engineering: A Review
Appraisal of Mega Float - Floating Offshore Remote Terminal (FORT) on Catenary Mooring for Deep Water
Chapter 3: Engineering Management of Sustainable Manufacturing Systems
Effectiveness of Safety Management in Oil and Gas Project
Effectiveness of Human Resource Utilization in Oil and Gas Project
Dynamic System Models Sutami Hydropower Plant Indonesia to Calculate the Economic and Environmental Aspects of Hydropower Plant Operation
Energy and Environment Implications of Long-Term Power Development Involving Renewable Energy: A Case of Timor Island, Indonesia
by "Nielsen BookData"