年次大会講演論文集 : JSME annual meeting The Japan Society of Mechanical Engineers 2006(1) (20060915)

 CiNii Books

表紙  Full Text: CiNii   
講演分野(中扉)  Full Text: CiNii   
大会委員会  Full Text: CiNii   
実行委員会  Full Text: CiNii   
目次  Full Text: CiNii    A1-A16
2001 An Introduction to Peer to Peer Network Architecture and Its Application  Full Text: CiNii    1-2
2002 Coloured Petri Net based Modelling of Multiple-Product Flexible Manufacturing System  Full Text: CiNii    3-4
2003 Source Identification Using Blind Source Separation  Full Text: CiNii    5-6
2004 Development of the Reverse Engineering System LocForm and Its Application  Full Text: CiNii    7-8
2005 Interactive Interface for Multi Agent Based Traffic Simulator  Full Text: CiNii    9-10
2006 Sound quality optimization of vehicle door closing sound based on psychoacoustic parameters  Full Text: CiNii    11-12
2007 The relation between the biomechanical characteristics and Kansei evaluation during the ingress motion  Full Text: CiNii    13-14
2008 Development of the Potential Criminal Expression Diagnosis Support Device  Full Text: CiNii    15-16
2009 Effect of enrichment basis functions in two-dimensional elastic-plastic X-FEM analysis  Full Text: CiNii    17-18
2010 Three-dimensional elastic-plastic fracture analysis using X-FEM  Full Text: CiNii    19-20
2011 A technique for arbitrary multiple crack growth without jump function enrichment  Full Text: CiNii    21-22
2012 FEM analysis of influence to bone by artificial knee joint  Full Text: CiNii    23-24
2013 Numerical Simulation of Shaped Charges Using the SPH Solver : Jet Formation and Target Penetration  Full Text: CiNii    25-26
2014 Simulation of Liquid Jet Breakup using a Combination of a Two-phase particle model and a Grid Method  Full Text: CiNii    27-28
2015 Numerical Simulation of High Reynolds Number Flow using Meshfree Method  Full Text: CiNii    29-30
2016 Simulation of a Wake using a 3-D Vortex Element Method  Full Text: CiNii    31-32
2017 On the Flow Analysis of Semi-Solid Forming of Functionally Graded Material by using Smoothed Particle Hydrodynamics Method  Full Text: CiNii    33-34
2018 Geometrical Non-linearity of Structural Analysis in Particle Methods  Full Text: CiNii    35-36
2019 Modeling wet soil by using Distinct Element Method  Full Text: CiNii    37-38
2020 On the Adaptive Analysis based on B-spline Wavelet Galerkin Method  Full Text: CiNii    39-40
2021 Effect of moving node for EFG analysis  Full Text: CiNii    41-42
2022 Numerical implementation of moving least squares and their problems  Full Text: CiNii    43-44
2023 Researches on Hydrogen Dispersion Behavior in a Partially Open Space  Full Text: CiNii    45-46
2024 Numerical analysis of material transportation problems in fuel cell gas diffusion electrode  Full Text: CiNii    47-48
2025 Modeling for the diffusion of the fuel cell cars using multi-agent simulation  Full Text: CiNii    49-50
2026 Simulating the Hydrogen Society in a Distributed Agent Environment  Full Text: CiNii    51-52
2114 Numerical Simulation of Air and Coke Particle Motions in Blast Furnace : Effect of Tuyere Angle  Full Text: CiNii    53-54
2115 Structures of Intrinsic Localized Modes in Two Dimensional Lattice Systems  Full Text: CiNii    55-56
2116 Influence of Nano Cu Precipitate on Motion of Dislocation in Fe-Cu alloy  Full Text: CiNii    57-58
2117 Molecule Dynamics Analysis for Thermal Change and Mechanical Properties of Polyethylene Polymer  Full Text: CiNii    59-60
2118 Paralleled Vibration Response Analysis by Use of Domain Decomposition Method based on Conjugate Gradient Method  Full Text: CiNii    61-62
2119 Fracture Experiment and Numerical Analysis of FRP Tube subject to Axial Compression  Full Text: CiNii    63-64
2120 Optimal Design of Shell Structure for Crashworthiness  Full Text: CiNii    65-66
2121 3D Crack Propagation Analysis Using Free Mesh Method  Full Text: CiNii    67-68
2122 3D Real Time Animation for the elastic analysis Using Free Mesh Method  Full Text: CiNii    69-70
2123 Uncertainty Analysis of Multiple-Canister Repository Model by Large-Scale Simulation  Full Text: CiNii    71-72
2124 Metallic corrosion simulator with supercritical water  Full Text: CiNii    73-74
2125 A Study of AMR simulation with pFTT Data Structures  Full Text: CiNii    75-76
2126 Analysis of Wrinkled Membranes via a Projection Matrix  Full Text: CiNii    77-78
2201 The conservative property of the CIP-BS method  Full Text: CiNii    79-80
2202 CIP/multi-moment finite volume method and Discontinuous Galerkin method  Full Text: CiNii    81-82
2203 Compressible and incompressible fluid flow simulation by using the conservative IDO scheme  Full Text: CiNii    83-84
2204 CIP/Multi-Moment finite volume method on icosahedral grid for the sphere  Full Text: CiNii    85-86
2205 Implementation of CIP/Multi-moment finite volume method on the Yin-Yang spherical grid  Full Text: CiNii    87-88
2206 Numerical Simulation of Moving Boundary Problem by Overset-Grid IDO Method  Full Text: CiNii    89-90
2207 Development of multi-scale warning system for Tsunami (2)  Full Text: CiNii    91-92
2208 Conservative and accurate advection transport on sphere with the gnomonic cube grid  Full Text: CiNii    93-94
2209 Numerical Simulation of Sloshing in a Vessel with Baffle Plates  Full Text: CiNii    95-96
2210 3D Numerical Simulation of Sloshing by THINC Scheme  Full Text: CiNii    97-98
2211 Numerical Analysis of boiling phenomena using CIVA  Full Text: CiNii    99-100
2212 Free-surface flow calculation with higher-order conservative scheme  Full Text: CiNii    101-102
2213 Numerical simulations of wind-driven waves by CIP/Multi Moment Finite Volume Method  Full Text: CiNii    103-104
2221 Study on Elastic-Visco-Plastic Deformation Properties of Polypropylene During Cyclic Loading  Full Text: CiNii    105-106
2222 Study on Elastic-Visco-Plastic Deformation Properties of Nylon 66 After Absorbing Moisture  Full Text: CiNii    107-108
2223 Thermodynamic Analysis of Rubber Material to Predict Permanent Strain  Full Text: CiNii    109-110
2224 Effects of Internal Constraints on Deformation of Polycrystalline Materials  Full Text: CiNii    111-112
2225 Effect of Indentation Distance on Hardness Testing  Full Text: CiNii    113-114
2226 Elastoplastic Constitutive Modeling for Anisotrpic Porous Materials Considering Inhomogeneous Void distribution  Full Text: CiNii    115-116
2227 Fatigue Strength Evaluation of Perforated Plate at Elevated Temperature Based on SRL Method  Full Text: CiNii    117-118
2228 Cyclic Friction Phenomena Analyzed by Extended Subloading Surface and Subloading Friction Models  Full Text: CiNii    119-120
2229 Block Newton Procedure for Multiscale Elastoplastic Analysis  Full Text: CiNii    121-122
2601 Influence of Microstructures and Crystal Orientation on Fatigue Crack Growth Path in Commercial Pure Aluminum Rolled Sheets  Full Text: CiNii    123-124
2602 An Experimental and Finite Element Analysis of Plastic Deformation induced Crystal Rotation of pure-iron single crystal  Full Text: CiNii    125-126
2603 Derivation of Representative Volume Element of Micro Polycrystal Structure Based on SEM-EBSD Experiment Measurement  Full Text: CiNii    127-128
2604 Development of Statistically Stored Dislocation Pattern in Single Crystal under Tensile Loading  Full Text: CiNii    129-130
2605 Mulitiscale Crystal Plasticity Simulation on Evolution of Dislocation Pattern Based on Differences of Crystal Orientation in Grains  Full Text: CiNii    131-132
2701 Corrosion of Nitrided SUS316L in Super Critical Water Environments  Full Text: CiNii    133-134
2702 Characteristics of Easy-Release Screw Fastener by Shape-Memory-Alloy Washer  Full Text: CiNii    135-136
2704 Casting of A6061 aluminum alloy strip using a twin roll caster  Full Text: CiNii    137-138
2705 Semi-solid Casting of Aluminum Cast Alloy strip by an unequal diameter twin roll caster  Full Text: CiNii    139-140
2706 Basic Study of Simulation of Film Deformation in Tubular Film Stretching Process  Full Text: CiNii    141-142
2707 Study on creep behaviour of Shape Memory Polymer (DiARY) of Polyurethane Series  Full Text: CiNii    143-144
2708 Effect of copolymerization and cross-linker on restoration of shape memory gel  Full Text: CiNii    145-146
2709 Effect of temperature on restoration properties of low repulsion foam  Full Text: CiNii    147-148
2710 Ultra precision cutting of hard and brittle materials with diamond fly-cutting tool  Full Text: CiNii    149-150
2711 Study on Accuracy Improvement of Micro Fresnel Glass Molding  Full Text: CiNii    151-152
2712 Precision processing and assembly of micro-moving device adapting an ultrasonic motor  Full Text: CiNii    153-154
2713 Processing Technology and Heat Dissipation Characteristic of Microfin for Ultra-thin Radiating Plate  Full Text: CiNii    155-156
2714 Ultra high precision processing technology of mirrors of GaN blue Laser Diode resonator  Full Text: CiNii    157-158
2715 Research on micro pressure sensor implanted into gene alteration mouse  Full Text: CiNii    159-160
2716 Fine Wiring Technology by Ink-jet Printing and Laser Sintering of Nano Metal Particles  Full Text: CiNii    161-162
2717 Development of Micro-forming System for Metallic Glasses under Rapid Heating  Full Text: CiNii    163-164
2718 Behaivor of Dies and Forming Materials in 50nm Nanoimprint Forming of Metallic Glass  Full Text: CiNii    165-166
2719 Development of Diaphragm for Hybrid Structured Pressure Sensor of Metallic Glass and (100) Si  Full Text: CiNii    167-168
2720 Development of Injection Moldings having Fine-Patterns by X-Ray LIGA Process (Part 3)  Full Text: CiNii    169-170
2721 Development of deposition technique for TiNi SMA thin films by ion beam sputter method  Full Text: CiNii    171-172
2722 Micro Metal Injection Molding Using Hybrid Micro/Nano Powder  Full Text: CiNii    173-174
2723 Formation technology of high-quality pattern shape diamond CVD film  Full Text: CiNii    175-176
2724 Research on ultraviolet irradiation polishing technology of single crystal diamond semiconductor substrate  Full Text: CiNii    177-178
2725 Tensile Strength of C/C Composites  Full Text: CiNii    179-180
2726 The creep characteristic of C/C composite at high temperature  Full Text: CiNii    181-182
2727 Durability of SiC/SiC Composites with Cooling Structure under Thermal Cycling  Full Text: CiNii    183-184
2728 Development of Silicon Carbide Heat Resistant Composites by Powder Space Holder Method  Full Text: CiNii    185-186
2729 Effects of Microstructural Characteristics on the Tensile Properties of Unidirectional SiC/SiC Composites  Full Text: CiNii    187-188
2730 Water Vapor Corrosion of Melt Growth Composites under Ultra-High Temperature and High Pressure Enviornments  Full Text: CiNii    189-190
2731 Effect of Magnetic Field during Compacting on Elastic Modulus of Sintered Sr-ferrite  Full Text: CiNii    191-192
2732 Residual Stress Evaluation in Ceramic Materials for Artificial Joints by Raman Spectroscopy  Full Text: CiNii    193-194
2733 Development of Hybrid Proof Testing Method based on Detection of Microcrack in Bioceramics for Artificial Joints  Full Text: CiNii    195-196
2734 Quantitative Evaluation of Microfructure Process in Bioceramics by Acoustic Emission Source Characterization  Full Text: CiNii    197-198
2735 Influence of pore diameter for fracture strength of porous ceramics by sphere indentation  Full Text: CiNii    199-200
2736 Contact strength analysis within the backflow valve of ceramic ball  Full Text: CiNii    201-202
2737 Opening Behavior of Cyclic Fatigue Cracks in Porous Ceramics  Full Text: CiNii    203-204
2738 Crack-healing behavior of Mullite/SiC multi-composite under stress  Full Text: CiNii    205-206
2739 (Crack-healing+Proof test): a new methodology to guarantee the integrity of a ceramics component  Full Text: CiNii    207-208
2740 Strength Evaluation of Al_2O_3/SiC whisker Laminated Ceramics  Full Text: CiNii    209-210
2741 Mechanical Properties of Spark Plasma Sintering Bodies  Full Text: CiNii    211-212
2742 Microscopic observation of domain switching in Ferroelectric Ceramics under mechanical loading  Full Text: CiNii    213-214
2743 Microstructures and mechanical properties of extruded Mg-(7〜9%) Al-Zn-RE-Ca alloys  Full Text: CiNii    215-216
2744 Changes in microstructures and textures of AZ31 alloy and AZX311 alloy drawn wire and pipe during deformation at room temperature  Full Text: CiNii    217-218
2745 Improvement of Formability of AZ61 Magnesium Alloy by Structure-Control Rolling  Full Text: CiNii    219-220
2746 Rolling of Extruded of Magnesium Alloy : No.2 The Effect of Hot Rolling  Full Text: CiNii    221-222
2747 Reduction Process of Casting Defect in Aluminum Dei-casting by Applying Compression Load : Nondestructive Evaluation by X-ray CT  Full Text: CiNii    223-224
2748 Mechanical Properties of Wrought Extruded AZ31 Alloy via RCP Process  Full Text: CiNii    225-226
2749 Characterization of grain refined magnesium composite with Mg_2Si dispersoids by powder metallurgy process  Full Text: CiNii    227-228
2750 Cold drawing of magnesium alloy AZ31, AZ61 wires and fabrication of microscrew  Full Text: CiNii    229-230
2751 Study on Deep Drawing of Mg-Alloy  Full Text: CiNii    231-232
2752 Resistance Spot Welding with Cover Plate for Magnesium Alloys Mg_<96>Zn_2Y_2  Full Text: CiNii    233-234
2753 Fabrication of Porous Titanium Implant by the Powder-sheet Lamination Method  Full Text: CiNii    235-236
2754 Fabrication of Aluminium Foam by Powder Extrusion Foaming  Full Text: CiNii    237-238
2755 Bending of ultra-light porous metals  Full Text: CiNii    239-240
2756 Metal Foam Production Process Using Gelation of Slurry  Full Text: CiNii    241-242
2757 Shape Change and Pore Distribution in Aluminum Powder Compacts by Graded Foaming  Full Text: CiNii    243-244
2758 Fabrication and Evaluation of Micro Porous Metal Components by Powder Space Holder Method  Full Text: CiNii    245-246
2759 Analysis of Sintering Shrinkage in Micro Porous Metals Produced by Powder Space Holder Method  Full Text: CiNii    247-248
2760 Fabrication of Porous Titanium Scaffolds for Bone Regeneration by the Powder-sheet Lamination Method  Full Text: CiNii    249-250
2761 Characterization of Porous Titanium Scaffolds Made by the Powder-sheet Lamination Method  Full Text: CiNii    251-252
2801 Ultrasonic Evaluation of Nugget in Spot Welds with Line Focussed Probe  Full Text: CiNii    253-254
2802 Inprocess Penetration Control by Monitoring Molten Pool Condition in Thin Plate Welding  Full Text: CiNii    255-256
2803 Control of Temperature Distribution at the Interface on Steel/Aluminum Ally Dissimilar Metals Laser Welding by using a Contact Block  Full Text: CiNii    257-258
2804 Ultrasonic Welding of sheet metals in the water bath : No.2 Interfacial temperature and microstructure  Full Text: CiNii    259-260
2805 Ultra-sonic Welding of Anodized Al/Al-sheet : Influence of Al-sheet Thickness  Full Text: CiNii    261-262
2806 Development of Ultra Compact Orbital Welding Machine for Thermal Power Generating Boiler  Full Text: CiNii    263-264
2807 Applicability of Braze-Pressure-Welding (BPW) Technology to Austenitic Stainless Steel Pipe Joint  Full Text: CiNii    265-266
2808 Ultrasonic Welding of ceramics and metals : No.6 Comparison of the consumption energy  Full Text: CiNii    267-268
2809 Evaluations of Fatigue Strength and Formability of Al Alloy/SPCC Material Joined by Friction Stir Welding  Full Text: CiNii    269-270
2810 Strong Flow-joining of Flange and Hardened Shaft  Full Text: CiNii    271-272
2811 Collapse Control by Inertia Force in Axial Impact of Square Section Tube  Full Text: CiNii    273-274
2813 Study on high temperature explosive forming of Mg alloy (AZ31-O)  Full Text: CiNii    275-276
2814 Study on Explosive Forming of Aluminum Alloy Plate  Full Text: CiNii    277-278
2815 Numerical Simulation of the Behavior of a Metal Sheet during Explosive Forming  Full Text: CiNii    279-280
2816 Effects of Pressure Profile on Plastic Deformation of Circular Plate Subjected to Impulsive Pressure  Full Text: CiNii    281-282
2817 An Explosive Welding Process by Effective Application of Reflected Underwater Shock Wave  Full Text: CiNii    283-284
2818 Discussion on the Weldable Conditions for Thin Plate Welding Using Underwater Shock Wave  Full Text: CiNii    285-286
2819 New technique of developing a composite by the penetration of hard powders into metal plate  Full Text: CiNii    287-288
2820 Development of Extremely High Impulsive Pressure Generator by Using Collision of Metal Jets  Full Text: CiNii    289-290
2821 Monitoring of Fatigue Damage in Low-Carbon Steel with Electromagnetic Acoustic Resonance  Full Text: CiNii    291-292
2822 AE Source Dynamics And Source Location Evaluated By Multi Sensor Optical Fiber AE System  Full Text: CiNii    293-294
2823 Mechanism of Environmental Assisted Cracking of Dual Phase Stainless Steel by AE and Corrosion Potential Fluctuation  Full Text: CiNii    295-296
2824 Verification of Pulsed-Electro-Magnetic-Acoustic Force Applied to Detecting Ungrouting Part in Sheath Ducts by Experiment and FEM  Full Text: CiNii    297-298
2825 Modeling of a Scan Type Magnetic Camera Image Using the Improved Dipole Model  Full Text: CiNii    299-300
2826 Mechanical Property Mapping around Dissimilar Material Interface using Nanoindentation Technique  Full Text: CiNii    301-302
2827 Selective generation of circumferential guided waves in a pipe  Full Text: CiNii    303-304
2828 Study on an effective generation of guided waves in a pipe  Full Text: CiNii    305-306
2829 Development of pipe inspection equipment with guided waves  Full Text: CiNii    307-308
2830 Defective detection of FRP plates by Ultrasonic pulse echo method  Full Text: CiNii    309-310
2831 Artificial AE Source Location in Outdoor Oil Tank Using a Neural Network  Full Text: CiNii    311-312
2832 Internal Temperature Monitoring for Heated Materials by Ultrasound  Full Text: CiNii    313-314
2833 Estimation of corrosion damage of plate structure using active Lamb waves  Full Text: CiNii    315-316
2834 Identification of Defect Parameters by Thermal Response Spectroscopic Inverse Analysis Scheme  Full Text: CiNii    317-318
2835 Classification of Defect Caused by Casting of Cast Steel Using Neural Network  Full Text: CiNii    319-320
2836 Influence of the observation error in identifying the external load  Full Text: CiNii    321-322
2837 Identification of a defect using the equivalent load method  Full Text: CiNii    323-324
2838 Diagnosing of Fastening Condition of a Bolt in a Truss Structure Based on Piezo-electric Impedance Measurement  Full Text: CiNii    325-326
2839 Strain Measurements Using Piezoelectric Polymer Film : The Method for Attaching Vapor Deposition Electrodes of the Free Form  Full Text: CiNii    327-328
2840 Measurement of Deformation-Induced Martensite in Stainless Steel Using Magnetic Contact Holding Force  Full Text: CiNii    329-330
2841 Detection of a Fatigue Crack in a Welded Joint by means of the Thermoelastic Stress Imaging System  Full Text: CiNii    331-332
2842 Nondestructive Evaluation of BGA Solder Balls using Infrared Thermography Method  Full Text: CiNii    333-334
2901 Surface characteristics of stainless steel cold-rolled with rolls polished in axial direction  Full Text: CiNii    335-336
2902 Investigation of the effect of groove array formed on tool surface on surface quality of a product by plane strain extrusion test  Full Text: CiNii    337-338
2903 Effect of Surface Structure on the Thermal Softening and the Resistance of Plastic Deformation of Warm and Hot Forging Die  Full Text: CiNii    339-340
2904 Slide-bending Formation of Thin Metal Sheet by Using an Industrial Robot  Full Text: CiNii    341-342
2905 Bending of Glass and Silicon foils by Laser Forming  Full Text: CiNii    343-344
2906 Real Time Measurement and Visualization of Three-dimensional Non-steady State Plastic Flow in Forming Process by Physical Forming Simulation  Full Text: CiNii    345-346
2907 Experimental Investigation on the Material Flow of a Sleeve part of Nut to the Grooves of Bolt in Sleeve Riveting Method  Full Text: CiNii    347-348
2908 Expanding application of Diameter-Enlargement work to multiple shaft  Full Text: CiNii    349-350
2910 Surface Coating for Ductile Cast Iron Using Mechanically Alloyed Powders in the Ni-Al-Si System  Full Text: CiNii    351-352
2911 Fabrication of Fe_3AIC-FeAl Two Phase Alloy and Its Characteristics  Full Text: CiNii    353-354
2912 Surface-improvement of cast iron by mechanically alloyed powder using machined chips  Full Text: CiNii    355-356
2913 Wear property of surface-modified magnesium alloys using mechanically alloyed powders  Full Text: CiNii    357-358
2914 Application of mechanically alloyed Mg-Al Powder for die-forging  Full Text: CiNii    359-360
2915 Influence of Compositions of Ti-Ni Alloys by Pulse-Current Pressure Sintering on Their Thermo-Mechanical Properties  Full Text: CiNii    361-362
2916 Surface Treatment Process for High Functionality of Metal Injection Molding  Full Text: CiNii    363-364
2917 Quality Improvement in LIGA/Micro Sacrificial Plastic Mold Insert Metal Injection Molding  Full Text: CiNii    365-366
2918 Evaluation of Mechanical Properties and Formability of GFRP for Wind Turbine Blade  Full Text: CiNii    367-368
2919 Study on Mechanical Properties of FRP Pipes Manufactured by Using Centrifugal Force  Full Text: CiNii    369-370
2920 An Improved Method for Evaluation of Fiber Strength Using Fragmentation Test  Full Text: CiNii    371-372
2921 Internal Damage for Low-Velocity Impact in Stitched Laminates  Full Text: CiNii    373-374
2922 Notched strength of cross-ply CFRP laminates with different stacking configuration and analysis using a cohesive zone model  Full Text: CiNii    375-376
2923 Effect of Water Environment on Bending Fatigue Properties of BMC  Full Text: CiNii    377-378
2924 Simulation of Fabric Shaping Process Using Finite Element Method  Full Text: CiNii    379-380
2925 Prediction of creep rupture in unidirectional composites  Full Text: CiNii    381-382
2926 Hot spin tests of 3D woven fabric CMC disks  Full Text: CiNii    383-384
2927 High-efficiency machining of Alumina/SiC composites by using crack-healing  Full Text: CiNii    385-386
3001 Deformation and Tensile Response of Bamboo Fibers  Full Text: CiNii    387-388
3002 Effect of Heat Treatment to Tensile Properties for Jute Fiber Reinforced Composite  Full Text: CiNii    389-390
3003 Development and strength properties of biodegradable composites using bamboo fibers  Full Text: CiNii    391-392
3005 Fabrication and Characterization of Loofah Fiber/Lignin Composite by Hot Pressing  Full Text: CiNii    393-394
3006 Thermal conductivity of "green" composites  Full Text: CiNii    395-396
3007 Study on strengthening of ramie fiber green composites  Full Text: CiNii    397-398
3008 Tensile deformation properties of textile green composites using plain woven fabric of ramie fibers  Full Text: CiNii    399-400
3009 Development and Fracture Property Evaluation of PLLA Base Polymer Blends  Full Text: CiNii    401-402
3010 Phase morphology and fracture properties of PLA/PCL/LTI polymer blend  Full Text: CiNii    403-404
3011 Effect of Water Environment on PLA Green Composites : about Matrix  Full Text: CiNii    405-406
3012 Two Stage Fatigue of Wood-Based Panel under Panel Shear Load  Full Text: CiNii    407-408
3013 Cyclic naoindentation for the delamination of thin film coating  Full Text: CiNii    409-410
3014 Improvement on Adhesive Strength of Ti Doped DLC Films by Heat Treatment in Vacuum  Full Text: CiNii    411-412
3015 Effects of Cu Interlayer on Adhesive Strength of DLC Thin Films  Full Text: CiNii    413-414
3016 Influence of Composition on Mechanical and High Temperature Oxidation Properties of Al-B-C Thin Films  Full Text: CiNii    415-416
3017 Tribological properties under dry condition of oriented Ti-N-B thin hard film deposited by Arc Ion Plating  Full Text: CiNii    417-418
3018 Evaluation on Sliding Wear of Stainless Steels Produced by Metal Powder Injection Molding  Full Text: CiNii    419-420
3019 Increase in Fatigue Limit of Spring Steels Containing an Artificial Defect by Shot Peening  Full Text: CiNii    421-422
3020 Surface Modification of Various Kinds of Aluminum Alloys using YAG Laser with Powder Coating of Stainless Steel SUS316  Full Text: CiNii    423-424
3021 Surface Process of micro die by ion beam irradiation  Full Text: CiNii    425-426
3022 Surface Characteristics of Laser Alloyed Stainless Steel with Al-Si Powder  Full Text: CiNii    427-428
3023 Tribological characteristic of magnesium alloy in plastic deformation  Full Text: CiNii    429-430
3301 Distinction of Crystal System for New Bio-Compatible Piezoelectric Materials  Full Text: CiNii    431-432
3302 Development of MgSiO_3 Biocompatible Piezoelectric Film Fabrication Technology  Full Text: CiNii    433-434
3303 Electrochemical deposition of calcium phosphate thin film on titanium substrate  Full Text: CiNii    435-436
3304 Sputter Generating and Characterization of a Titanium Alloy Microneedle  Full Text: CiNii    437-438
3305 Development of in-situ Electrochemical-tribological test system in the macrophage environment  Full Text: CiNii    439-440
3306 Grain Refinement and Mechanical Properties for Environmental Steel Metals  Full Text: CiNii    441-442
3307 Grain Refinement and Mechanical Properties for Environmental f.c.c. Sheet Metals  Full Text: CiNii    443-444
3308 Plastic Deformation and Bending Properties of Grained Metallic Materials  Full Text: CiNii    445-446
3309 Synergistic Effects of Corrosion and Fatigue on Corrosion Fatigue of Ti-6Al-4V Alloys  Full Text: CiNii    447-448
3310 Effect of Notch Configuration on Fatigue Property of Titanium Alloy Screw  Full Text: CiNii    449-450
3311 Influence of environmental degradation and Vitamin-E (a-Tocopherol) addition on the mechanical property of ultra high molecular weight polyethylene  Full Text: CiNii    451-452
3312 In-situ Observation of Mechanosensing Behavior in Osteocytes  Full Text: CiNii    453-454
3313 Influence of ELID grinding fluid on cell bonding on surface of Co-Cr alloy  Full Text: CiNii    455-456
3314 Electrochemical properties of hydroxyapatite deposited SiO_2 films  Full Text: CiNii    457-458
3315 Development of Bone-Like Composite Material and its Characteristics  Full Text: CiNii    459-460
3316 Development of solid-air composites by biomimetics superior in load dispersion ability under dynamic loading condition  Full Text: CiNii    461-462
3317 High cycle fatigue property of SUS316L with loose circular notch  Full Text: CiNii    463-464
3318 Statistical Fatigue Property of SUJ2 Steel in Very High Cycle Regime obtained by Multi-type Axial Fatigue Testing Machine  Full Text: CiNii    465-466
3319 Effect of Applied Stress Ratio on the Transition of fracture Mode in Very High Cycle Fatigue  Full Text: CiNii    467-468
3320 Super long-life fatigue of radical nitriding and shot-peened SNCM439 steel  Full Text: CiNii    469-470
3321 Fatigue fracture mechanisms in ultralong of cemented carbide WC-Co  Full Text: CiNii    471-472
3322 An identification of the impact load by the radiation sound from the impacted body : Determination of the transfer function by the FEM analysis  Full Text: CiNii    473-474
3323 Small "Cullet" generation technique for recycling by underwater shock wave  Full Text: CiNii    475-476
3324 Deformation Analysis in bullet collision  Full Text: CiNii    477-478
3325 Improvement of strength in the extended poly lactic acid materials  Full Text: CiNii    479-480
3326 Mechanical Behavior of Industrial Pure Titanium during Biaxial Compressive Plastic Deformation with Strain Path Change  Full Text: CiNii    481-482
3327 Material Degradation Analysis of Turbine Rotor Steel by Indentation Test  Full Text: CiNii    483-484
3328 Constitutive Modeling of Strain Amplitude Dependent Cyclic Behavior for SUS316L Based on the Evolution of Meso-Structure  Full Text: CiNii    485-486
3329 Discrete Dislocation Dynamics Simulation on Mechanical Properties of Dislocation Substructures  Full Text: CiNii    487-488
3330 Unique Deformation Behaviors of Ultrafine Grained Bulk Metallic Materials  Full Text: CiNii    489-490
3331 Molecular Dynamics Study on Influence of Processing Condition of Equal Channel Angular Pressing on Grain Refinement Behavior of α-Fe  Full Text: CiNii    491-492
3332 Microstructure and Mechanical Properties of Martensite Transformed from Ultrafine Grained Austenite  Full Text: CiNii    493-494
3333 Fatigue Crack Growth Behavior in CT Specimens of Nano-crystal Powder Al Alloys  Full Text: CiNii    495-496
3334 Fracture Testing of TiAl Based Alloys on the Micrometer Scale  Full Text: CiNii    497-498
3335 The influence of deformation microstructure on yield strength of cold-rolled fcc ferrous alloys  Full Text: CiNii    499-500
3336 Dislocation modeling of the Hall-Petch relationship of metal polycrystals  Full Text: CiNii    501-502
3337 Discrete Dislocation Study of Plastic Deformation Behavior of Polycrystalline Metal and Grain Size Effects  Full Text: CiNii    503-504
3338 Molecular Dynamics Study of Temperature and Strain Rate Effects on Finite Deformation in Amorphous Alloy Model  Full Text: CiNii    505-506
3339 Internal Structure and Local Lattice Instability of Amorphous Metals  Full Text: CiNii    507-508
3340 Deformation and fracture behaviors in a Zr-based bulk metallic glass  Full Text: CiNii    509-510
3341 Fatigue Fracture Behavior of a Zr-based Bulk Amorphous Alloy  Full Text: CiNii    511-512
3401 Interfacial Oxidation of Thermal Barrier Coating due to a Long Period High-temperature Exposure Tests  Full Text: CiNii    513-514
3402 The effect of spray condition on the layer structure of thermal barrier coating  Full Text: CiNii    515-516
3403 A Trial for Quantitative Expression of APSed Thermal Barrier Ceramic Top Coat Microstructure  Full Text: CiNii    517-518
3404 Thermal Cycle Damage Behavior in the Air Plasma Sprayed Thermal Barrier Coatings  Full Text: CiNii    519-520
3405 Simulation of TGO Formation and Spalling Stress Analysis  Full Text: CiNii    521-522
3406 Frequency Response Analysis of Impedance Spectra of Degraded Thermal Barrier Coating Systems  Full Text: CiNii    523-524
3407 Creep and Fatigue Failures of Plasma-sprayed Thermal Barrier Coating System with Segmented Top-coat under Different Environmental Conditions  Full Text: CiNii    525-526
3408 Ceramics Coating for Steam Turbine Blade  Full Text: CiNii    527-528
3409 Characteristics of Erosion Resistance and Fatigue for Steam Turbine Blade Coating Materials at 723K  Full Text: CiNii    529-530
3410 Femtsecond Laser Processing of Hard Thin Films and Control of Tribological Characteristics  Full Text: CiNii    531-532
3411 Wear resistance of combustion CVD diamond/APS Mo hybrid coating  Full Text: CiNii    533-534
3412 Evaluation of Interfacial Fracture Toughness and Residual Stresses in Stainless Steel Coatings prepared by HVOF spraying  Full Text: CiNii    535-536
3413 An Evaluation of the damage propagations of woven fabrics by M^3 method  Full Text: CiNii    537-538
3414 On a Damage Development of a Woven Composites with Spread Tow  Full Text: CiNii    539-540
3415 On a development of a supporting system for finite element modeling and design of woven fabric composites  Full Text: CiNii    541-542
3416 Multiscale Optimum Design of Piezoelectric Materials by Crystallographic Homogenization Method  Full Text: CiNii    543-544
3417 Calculation method of equivalent property with the mesh superposition method for composite materials  Full Text: CiNii    545-546
3418 An Evaluation and Analysis of Damage Process in Femoral Prosthesis Stem made from FRP  Full Text: CiNii    547-548
3419 Investigation of fracture behavior in Short-beam-bend test of FRP  Full Text: CiNii    549-550
3420 Study on mode II interlaminar fracture toughness of FRP by Notched Short Beam test  Full Text: CiNii    551-552
3421 Micromechanical Analysis of Macroscopic Anisotropic Coefficients of Thermal Expansion of Composite Materials  Full Text: CiNii    553-554
3422 Evaluation of Effective Elastic Properties of Carbon Nanocoil-Reinforced Polymer Composites by a Unit Cell Method  Full Text: CiNii    555-556
3423 Comparison of Yielding Behaviors under Monotonic Tensile with Low Cycle Fatigue testing  Full Text: CiNii    557-558
3424 Fatigue Properties of Super Lock Bolt  Full Text: CiNii    559-560
3425 Study on Fatigue Properties of Plastic Deformed Stainless Steel  Full Text: CiNii    561-562
3426 Safety Improve of Structural Components  Full Text: CiNii    563-564
3427 Fatigue Properties of High-strength Bolt  Full Text: CiNii    565-566
3428 Finite element analysis of failure behavior of elbow pipe with local wall thinning  Full Text: CiNii    567-568
3429 Finite Deformation Analysis using Natural Strain : Distributions of Shearing Modulus G after Pre-deformation for Different Deformation Path  Full Text: CiNii    569-570
3430 Intensity of Singular Stress Field due to Wedge-Shaped Defect in Human Tooth after Restored with Composite Resins  Full Text: CiNii    571-572
3431 Large Deflection Analysis of Pipe Bends by the Finite Element Method  Full Text: CiNii    573-574
3432 Thermal Stress Analysis by Finite Element Method of Electronic Device Filled with Epoxy Resin  Full Text: CiNii    575-576
3433 FEM Thermal Stress Analysis of inner Solder Joint Parts in Electronic Device  Full Text: CiNii    577-578
3434 Damping Characters of Shape Memory Alloy by Ultrasonic Wave  Full Text: CiNii    579-580
3435 Crystal Structure of Ni-Ti Alloy by X-ray Diffraction Pattern Simulation Program  Full Text: CiNii    581-582
3436 The Mechanism of Shape Memory Effect for Single Atom System  Full Text: CiNii    583-584
3437 Shape Effect on Seismic Characteristics of Single-stage Bellows of TiNi Shape Memory Alloy  Full Text: CiNii    585-586
3438 Creep deformation and fracture in clay reinforced nylon nanocomposite  Full Text: CiNii    587-588
3439 A Study on Mode II Fracture of the Interfacial Crack of Laminated Materials  Full Text: CiNii    589-590
3440 Impact Damage Evaluation of CFRP Laminate Using Discrete Wavelet Transform  Full Text: CiNii    591-592
3441 Investigation on Thermal Expansion Coefficients of Short Fiber Composites  Full Text: CiNii    593-594
3442 Nonlinear multi-scale analysis for the domain switching in ferroelectrics  Full Text: CiNii    595-596
3443 Evaluation of Ferroelectric Hysteresis Behaviors for Piezoelectric Thin : Investigation on Effect of Specimen Size by Static Piezoelectro-Elastic Analysis  Full Text: CiNii    597-598
3444 Development of High-Performance Piezoelectric Actuator  Full Text: CiNii    599-600
3445 Estimation of Material Properties of Piezoelectric Ceramics by Resonance Frequency  Full Text: CiNii    601-602
3446 Mode I crack growth rate of a ferromagnetic elastic strip in a uniform magnetic field  Full Text: CiNii    603-604
3447 Location Identification of Quantum Dots using Photoluminescence Characteristics due to Nanoscale Indentation  Full Text: CiNii    605-606
3448 Effect of Tool Geometry on Static Strength of Friction Stir Spot Welded Joints  Full Text: CiNii    607-608
3449 A Study on the Durability Evaluation of Bellows Type Expansion Joints  Full Text: CiNii    609-610
3450 A Method for Calculating Nominal Structural Stress of Arc Welded Structures  Full Text: CiNii    611-612
3451 A Method for Calculating Nominal Structural Stress of Spot Welding : Acquisition of displacement date for boundary condition  Full Text: CiNii    613-614
3452 Stress Analysis of Thin Walled Box Section Beam by Spot Welding in Irregular Pitch Under Torsion  Full Text: CiNii    615-616
3501 Installation of material testing facilities in high pressure gaseous hydrogen  Full Text: CiNii    617-618
3502 Hydrogen environment embrittlement of stainless steels at low Temperatures by the simple testing method for hydrogen environment  Full Text: CiNii    619-620
3503 Hydrogen Analysis of SUS304 Stainless Steel by Thermal Desorption Spectroscopy  Full Text: CiNii    621-622
3504 Effect of hydrogen charge on fatigue strength of pre-charged stainless steel specimen  Full Text: CiNii    623-624
3505 Influence of internal Hydrogen State on the Fatigue Behavior in Cold-Drawn High-Strength Steel  Full Text: CiNii    625-626
3506 The Effects of Hydrogen on Threshold Stress Intensity Factor Range and the near Threshold Fatigue Crack Growth Behavior of a High-Strength Steel SCM435  Full Text: CiNii    627-628
3507 Effect of Hydrogen and Frequency on Low-Cycle Fatigue Behavior of SCM435 Steel for Storage Cylinder of Hydrogen Station  Full Text: CiNii    629-630
3508 Hydrogen Entry and Strength Characteristics of Carbon Steel SGP for Gas Piping  Full Text: CiNii    631-632
3509 Hydrogen Penetration Properties and Fatigue Crack Growth Behavior of Austenitic Stainless Steels Exposed to High Pressure Hydrogen  Full Text: CiNii    633-634
3510 Fatigue Crack Growth Characteristics of Carbon Steel in Hydrogen Gas Environment  Full Text: CiNii    635-636
3511 Effects of Hydrogen Environment on Fatigue Crack Growth Rate and its Dependence on Testing Frequency in Stable Austenitic Stainless Steel JIS SUS310S  Full Text: CiNii    637-638
3512 Effect of Hydrogen Environment on Fatigue crack growth of Friction Stir Welded Joints of A6061-T6 Aluminum Alloy  Full Text: CiNii    639-640
3513 Effect of Hydrogen Environment on Non-propagation and Propagation of Fatigue Crack in a SUS304 Steel with Small Blind Holes  Full Text: CiNii    641-642
3514 Effect of Hydrogen Gas Environment on Fretting Fatigue Strength of Materials for Machinery  Full Text: CiNii    643-644
3515 The analyses of the interaction between dynamic dislocations and hydrogen under cyclic loading condition which induces transgranular facet like fracture  Full Text: CiNii    645-646
3516 Slow strain-rate testing response of aluminum alloys in high-humidity air  Full Text: CiNii    647-648
3517 Evaluation of fracture toughness of a PZT ceramic for the hydrogen flow meter  Full Text: CiNii    649-650
3518 Ductile-Brittle Fracture Transition and Fracture Resistance of COR-TEN O and its Hydrogen Charged Material  Full Text: CiNii    651-652
3519 Effect of Hydrogen on Tensile Strength of SCM435 Steel used for Storage Cylinder in Hydrogen Station  Full Text: CiNii    653-654
3520 Nondestructive Detection of Tilted Surface Defect with Wedge Shape by Photoacoustic Method  Full Text: CiNii    655-656
3521 Evaluation on Fracture Toughness of IF method by Nanoindentation  Full Text: CiNii    657-658
3522 Remote monitoring of fatigue cracks in a steel bridge by self-reference lock-in infrared thermography  Full Text: CiNii    659-660
3523 Develpoment of low reflectance type infrared thermography by microbolometer  Full Text: CiNii    661-662
3524 Concepts of Equivalent Distributed Stress and Representative Surface Crack in FLARP  Full Text: CiNii    663-664
3525 Physical Meaning of Fictitious COD at Notch Root  Full Text: CiNii    665-666
3526 Plastic Deformation under Cyclic Loading Condition  Full Text: CiNii    667-668
3527 Fatigue Crack Growth in the First Grain Boundary Adjacent Notch Root  Full Text: CiNii    669-670
3528 A Simple Estimation Method of The Stress Distribution Normal to Cross Section at Weld Toe in the Non-load Carrying Joints  Full Text: CiNii    671-672
3529 Analysis of the effect of the stress ratio on the fatigue crack growth behavior using RPG load  Full Text: CiNii    673-674
3530 Discussion on Measurement Conditions of Hysteresis Loops for RPG Load  Full Text: CiNii    675-676
3531 Development of Fatigue Life Estimation System for the Fatigue Crack Growth Simulation code FLARP  Full Text: CiNii    677-678
3532 On the Morphological Simulation of Fatigue Crack Propagation  Full Text: CiNii    679-680
3533 The Simulation of Fatigue Crack Propagation on the Welded Structure  Full Text: CiNii    681-682
3534 A Simulation of Fatigue Crack Propagation under Variable Amplitude Loading based on ΔK_<RP>  Full Text: CiNii    683-684
3535 Simulation on Initiation and Propagation of Fatigue Crack for Bead-on-plate Welded Specimen  Full Text: CiNii    685-686
3536 Prediction of Fatigue Crack Initiation and Propagation for a Steel Plate with a Circular Hole by FLARP  Full Text: CiNii    687-688
3537 Fatigue life analysis by FLARP for Cruciform joint with K-butt wled  Full Text: CiNii    689-690
3538 Analyze the influence of ultrasonic peening on fatigue life in pad welded joint by FLARP  Full Text: CiNii    691-692
3539 Fatigue Crack Initiation and Propagation Analysis in the Hull Double Bottom Structural Model with a Corner Bracket by FLARP  Full Text: CiNii    693-694
3540 Effect of Trace Impurities on Fatigue Strength of Ultrafine Grain Copper  Full Text: CiNii    695-696
3541 The Fatigue Strength of Ultra-fine Grained P/M Aluminum Alloys at Elevated Temperature  Full Text: CiNii    697-698
3542 Effect of grain size on properties of fatigue crack growth of Inconel 718 at elevated temperature  Full Text: CiNii    699-700
3543 Effect of Corrosive Environment on Fatigue Behaviour in High V-Cr-Ni Cast Irons  Full Text: CiNii    701-702
3544 Corrosion Fatigue of Hastelloy Sprayed Coating under Pulsating Tensile Stress  Full Text: CiNii    703-704
3545 Fatigue Crack Initiation and Propagation in Zr-based Bulk Metallic Glass  Full Text: CiNii    705-706
3546 Effects of bake hardening on thin sheet of ultra low carbon steel (ULCS)  Full Text: CiNii    707-708
3547 Influence of fatigue characteristics for SUS304 stainless steel thin sheet exerted by specimen  Full Text: CiNii    709-710
3548 Comparison of Crack Propagation Behavior between Pure Aluminum and 6061 Aluminum Alloy  Full Text: CiNii    711-712
3549 Effect of laser peening treatment on fatigue property in pre-cracked AC4CH  Full Text: CiNii    713-714
3550 Relationship between Fatigue Properties and Microstructures in Ti-xMo-3Al Alloys  Full Text: CiNii    715-716
3551 Fatigue Crack Propagation Behavior of AZ31 Extruded Magnesium Alloy at Two-Step Load Conditions  Full Text: CiNii    717-718
3552 Crack Propagation Behavior at Sn37Pb-Copper Interface  Full Text: CiNii    719-720
3553 Effect of a Void Position on Fatigue Life for BGA Solder Joints  Full Text: CiNii    721-722
3554 Low Cycle Fatigue Strength of Sn-8Zn-3Bi Under Multiaxial Loading  Full Text: CiNii    723-724
3555 Fatigue property and stress simulation for lead-free solder  Full Text: CiNii    725-726
3556 Creep Fatigue Life of Sn-3.5Ag Solder at Low Temperatures  Full Text: CiNii    727-728
3557 Strain Rate Dependency of Strength Properties of Lead-Free Solder  Full Text: CiNii    729-730
3558 Evaluation of elaso-plastic-creep characteristic of lead-free solder by stepped ramp loading  Full Text: CiNii    731-732
3559 Ratchetting and Creep Deformation of Solder and Simulation  Full Text: CiNii    733-734
3560 Evaluation of Mechanical Properties of In-service Solder Joints by Indentation Method  Full Text: CiNii    735-736
3561 Evaluation of Mechanical Properties and Nano-structure Analysis of Au Solders  Full Text: CiNii    737-738
3601 Fatigue Damage Evaluation of SUS304 by Magnetism Change in Fatigue Process  Full Text: CiNii    739-740
3602 Microstructural Characterization of Creep-Fatigued Ferritic Heat-Resisting Steel 12Cr-2W  Full Text: CiNii    741-742
3603 High-cycle Fatigue Properties of Austenitic Supperalloys at High Temperature  Full Text: CiNii    743-744
3604 Analysis of fatigue properties for nanoscopic strength analysis  Full Text: CiNii    745-746
3605 Analyses of Fatigue Strength of Metals Based on JSMS Database : Scattering of Fatigue Strength and Mechanisms  Full Text: CiNii    747-748
3606 Evaluation of the Behavior of Small Cracks Emanating from Small Defects under Biaxial Loading  Full Text: CiNii    749-750
3607 Varying Loading Fatigue of Welded Joint after the Application of Large Strain Cycling  Full Text: CiNii    751-752
3608 Failure Analysis of the Leaf Spring dropped on the Road  Full Text: CiNii    753-754
3609 A Method Arresting Crack Initiation from Stop Drilling Hole  Full Text: CiNii    755-756
3610 Effect of Heat Treatment on Corrosion Fatigue Behaviour of Type 444 Stainless Steel  Full Text: CiNii    757-758
3611 Estimation of residual strength for corroded steel plates of long term used structures  Full Text: CiNii    759-760
3612 Corrosion Fatigue Failure by In-line Flow-induced Vibration  Full Text: CiNii    761-762
3613 Effect of Hydrogen in Molten Aluminum on Fatigue Properties of Squeeze Cast Al Alloy  Full Text: CiNii    763-764
3614 Corrosion fatigue properties of magnesium alloy coated with an electroless Ni plating  Full Text: CiNii    765-766
3615 Finite Element Analysis for Identification of Back Surface Crack by Direct Current Potential Difference Method with Auxiliary Current  Full Text: CiNii    767-768
3616 Vibration Modes on Test of Dynamic Modulus of Elasticity for Concrete  Full Text: CiNii    769-770
3617 Cyclic plasticity model incorporation elastic boundary and damage concept  Full Text: CiNii    771-772
3618 Cyclic deformation of metal predicted by elastoplastic constitutive model with subloading surface concept  Full Text: CiNii    773-774
3619 Enhancement of durability and optimum fatigue design for high pressure composite vessel  Full Text: CiNii    775-776
3620 Improvement of Fatigue Strength of Light Metallic Materials by Cavitation Peening  Full Text: CiNii    777-778
3621 Influence of DLC coating on the fatigue properties of Ti alloy  Full Text: CiNii    779-780
3622 Influence of thickness of cladding material in aluminized processing  Full Text: CiNii    781-782
3623 Effect of Surface Roughness on Fatigue strength of Shot Peened Aluminum Alloy  Full Text: CiNii    783-784
3639 Thermoelectroelastic Response of a Symmetric Functionally Graded Piezoelectric Slab with a Crack Parallel to the Boundaries  Full Text: CiNii    785-786
3640 One Dimensional Generalized Thermoelastic Analysis of Nonlinear Elastic Solids with damping  Full Text: CiNii    787-788
3641 Stress-Focusing Effect in a Spherical Inclusion with Dynamically Transforming Strains Caused by Thermal Impact  Full Text: CiNii    789-790
3642 Plane Axisymmetric Steady Thermoelastic Problem of Cylindrically Anisotropic Inhomogeneous Hollow Circular Plate  Full Text: CiNii    791-792
3643 Plane Axisymmetric Magnetothermoelastic Dynamic Response of Conducting Circular Plate Due to Cyclic Time Variation of Magnetic Flux  Full Text: CiNii    793-794
3644 Thermoelastic Analysis for a Laminated Composite Strip with an Interlayer of Functionally Graded Material  Full Text: CiNii    795-796
3645 Stress Concentrations of an Elastic Infinite Plate with a Circular Rigid Inclusion Under Harmonic Vibration Loads (2nd Report)  Full Text: CiNii    797-798
3646 An Elastic Circular Cylinder Subjected to Harmonic Vibrational Pressures on the Inner Surface  Full Text: CiNii    799-800
3647 Stresses and Deformations in a Conducting Infinite plate Subjected to Time Variation of Magnetic Field  Full Text: CiNii    801-802
3648 Diffraction of SH-wave by a Closed Crack with non-uniform Stiffness  Full Text: CiNii    803-804
3649 Predicting Locations of Defects in the Solidification Process for Large-Scale Cast Steel  Full Text: CiNii    805-806
3650 Transient Thermoelastic Analysis of an Angle-ply Laminated Hollow Cylinder due to Uniformly Distributed Heating  Full Text: CiNii    807-808
3651 Torsion of a Rigid Circular Cylinder Embedded in an Infinite Elastic Thick Plate  Full Text: CiNii    809-810
3652 Electroelastic Response of a Parallel Crack in a Functionally Graded Piezoelectric Strip  Full Text: CiNii    811-812
3653 Stress intensity factors around two parallel cracks in epoxy-aluminum composite materials  Full Text: CiNii    813-814
3654 Influence of Inclined Angle to Three Dimensional Internal Crack Growth Behavior due to Repeated Rolling Contact  Full Text: CiNii    815-816
3655 On the elastic interaction between a surface step and an edge dislocation  Full Text: CiNii    817-818
3656 Control of Thermal Stress in a Piezoelectric Composite Disk by a Stepwise Applied Electric Potential Distribution : Optimum Design of Electrode Dimensions  Full Text: CiNii    819-820
3657 Developments of Composite Material System with Ultra Light Weight  Full Text: CiNii    821-822
3658 Accuracy of Gradient and Hessian Estimation in Approximate Optimization  Full Text: CiNii    823-824
3659 Nonlinear Analysis of Inhomogeneous Thin Plates under In-plane Compression  Full Text: CiNii    825-826
3660 The Influence of Tensile Speed on Relationship between Stress and Time of S45C Materials with Indistinguishable Yield Point  Full Text: CiNii    827-828
3661 On the Deformational Behavior and Strength of Catheter : Characteristics of stress relaxation under two-stage step strain  Full Text: CiNii    829-830
3662 Examination of Screw Structure in High-pressure Equipment : Expansion of Design Manual II  Full Text: CiNii    831-832
3901 Strain Measurement for Concrete Specimens using Digital Image Correlation Method  Full Text: CiNii    833-834
3902 Deformation Analysis of Periodontal Tissues by Digital Image Correlation Method  Full Text: CiNii    835-836
3903 Measurements of Crack Opening Displacement Distribution using Digital Image Correlation Method and Evaluation of Fatigue Crack Propagation Rate  Full Text: CiNii    837-838
3904 Displacement and Strain Evaluation around a Crack Tip in Polycarbonate by means of Digital Image Correlation  Full Text: CiNii    839-840
3905 Bridge Deflection Measurement Using Digital Image Correlation  Full Text: CiNii    841-842
3906 Measurement of Displacement in the Whole View Field Using Digital Image Correlation : Application of Gray Level Correction  Full Text: CiNii    843-844
3907 Development of Dynamic Deformation Measurement Method using ESPI  Full Text: CiNii    845-846
3908 Phase Analysis of Moire Fringes Using Instantaneous Phase-stepping Method  Full Text: CiNii    847-848
3909 Application of Optical Methods on Out-of plane Loaded Plate  Full Text: CiNii    849-850
3910 Measurement of Stress Field around Bifurcated Notch by Moire Interferometry  Full Text: CiNii    851-852
3911 Evaluation of stress intensity factor for double column made of dissimilar material with surface crack  Full Text: CiNii    853-854
3912 Development of Image Processing Technique for Evaluating Welding Deformation and Residual-Stresses Based on the Inverse Analysis : The 1^<st> Report: Utilization of Binarization Method  Full Text: CiNii    855-856
3913 Ultrasonic evaluation of initiation and propagation processes of fine cracks at bonding interface of solder joints under repeated loading  Full Text: CiNii    857-858
3914 Deformation evaluation of solder joint by electromotive force  Full Text: CiNii    859-860
3915 Effect of Specimen Geometry on Tensile Properties of Structual Adhesive Butt Joints  Full Text: CiNii    861-862
3916 In-Plane and Through-Thikness Tennsile Stress-Strain Properties of Paper and Paperboard  Full Text: CiNii    863-864
3917 Strain Measurements Using Piezo Cable Sensor  Full Text: CiNii    865-866
3918 Estimation of Applied Stress for Fatigue Fracture Surface  Full Text: CiNii    867-868
3919 Dynamic Deformation Measurement of a Golf Ball during Normal Impact  Full Text: CiNii    869-870
3920 Strain Rate Dependence of Flow Stress of 7075-T6 at Very High Strain Rates  Full Text: CiNii    871-872
3921 Generation of Standing Interference Wave due to Superposition of Surface Acoustic Waves  Full Text: CiNii    873-874
3922 Flexible capacitive sensor for strain measurment of automobile tire  Full Text: CiNii    875-876
3923 Imaging of Heat Affect Zone in Weldment of Stainless Steel by Photothermal Electrochemical Detection  Full Text: CiNii    877-878
3924 Development of new equipment for birefringence measurement  Full Text: CiNii    879-880
3925 Effect of Variation of the Young's Modulus with Yield Carbon Steel on Distribution of Strain  Full Text: CiNii    881-882
3926 Determination of Components of Nano/Microscopic Strain by Raman Microspectroscopy  Full Text: CiNii    883-884
3945 Acoustic Resonant Spectroscopy for Measurements of Acoustic Properties of Thin Polymer Films  Full Text: CiNii    885-886
3946 In Situ TEM Observation of Crack Initiation at Interface Edge in Nano-cantilevers  Full Text: CiNii    887-888
3947 Evaluation of Crack Extension Resistance between Cu and Polyimide Films  Full Text: CiNii    889-890
3948 Study on reliability evaluation mechanical characteristics of static strength for fine wire  Full Text: CiNii    891-892
3949 Deformation Properties of Thin Films with Helical Nano-Structures  Full Text: CiNii    893-894
3950 Mechanical strength of hard coatings produced by physical vapor deposition  Full Text: CiNii    895-896
3951 Microstructure and Mechanical Properties of Electroplated Copper Thin Films  Full Text: CiNii    897-898
3952 Fracture Mechanism of Pore Free Ceramics  Full Text: CiNii    899-900
3953 Strength and Fatigue Properties of Polycrystalline Silicon Thin Films  Full Text: CiNii    901-902
3954 Fatigue reliability of CVD diamond film on Si substrate and its evaluation  Full Text: CiNii    903-904
3955 Mechanical properties of electroplated Cu-thin-film interconnections  Full Text: CiNii    905-906
3956 Threshold Current Density of Electromigration Damage in Angled Bamboo Lines  Full Text: CiNii    907-908
3957 Strength Evaluation of Polycrystalline Silicon Wafer  Full Text: CiNii    909-910
3958 Study of Modeling on Tensile Properties evaluation for sintered compact made from Sub-Micron Gold Powder  Full Text: CiNii    911-912
3959 Prediction of Delamination Strength at the Interface between a Thin Film and a Substrate by a Cohesive Zone Model  Full Text: CiNii    913-914
3960 Development of a method for making bond-order type interatomic potential for covalent systems  Full Text: CiNii    915-916
3961 Quantum Chemical Molecular Dynamics Study on Mechanisms of Stress Corrosion Cracking  Full Text: CiNii    917-918
3962 Evaluation of non-uniform strain in carbon nanotube with bend junction  Full Text: CiNii    919-920
3963 Evaluation of Stress Intensity Factor Using by Nonlinear Digital Image Correlation Method  Full Text: CiNii    921-922
3964 Calculation of Dynamic Stress Intensity Factor in Temperature Variation of Polymeric Material  Full Text: CiNii    923-924
3965 A Study on Stress Intensity Factor of Near the Disk Contact having Crack by Optical Method  Full Text: CiNii    925-926
3966 Attempt of Fracture Toughness Testing by Caustics and Supersonic Method in High Polymer Materials  Full Text: CiNii    927-928
3967 Study on the Crack Growth Specimen with Constant Stress Intensity Factor  Full Text: CiNii    929-930
4001 The Effects of Temperature, Strain-rates and Loading Histories on the Inelastic Behavior of a Biodegradability Polymer nPLA and Numerical Simulations  Full Text: CiNii    931-932
4002 Technical Modification at Microplastic Region on Hart's Constitutive Equation  Full Text: CiNii    933-934
4003 A Unified Constitutive Model for Ni Base Directionally Solidified Superalloy under Multiaxial Creep Conditions  Full Text: CiNii    935-936
4004 Evaluation of Stress and Strain Ranges under Non-proportional Cyclic Loading : For Triaxial Stress/Strain State  Full Text: CiNii    937-938
4005 Creep Deformation Behavior of A2024 under Tensile and Torsional Cyclic Loading  Full Text: CiNii    939-940
4006 Multistage Spring, Slider and Dashpot Rheological Model for Creep-Fatigue Behavior of Materials  Full Text: CiNii    941-942
4007 Creep-Fatigue Crack Propagation in Dissimilar Friction welded superalloy  Full Text: CiNii    943-944
4008 Evaluation of Cyclic Softening Behavior of Cr-Mo-V Cast Steel by Low Cycle Fatigue Test  Full Text: CiNii    945-946
4009 Low Cycle Fatigue Life of 1070 Aluminum Under Stress Controlled Multiaxial Loading  Full Text: CiNii    947-948
4010 Low Cycle Fatigue Life of SUS316NG and SGV410 Under Non-proportional Loading  Full Text: CiNii    949-950
4011 Stress Waveform Effect on Low-Cycle Fatigue Life of Round Notched Bar Using SUS316FR Stainless Steel  Full Text: CiNii    951-952
4012 FEM Analysis Method with Phase Transformation and Tempering Effect  Full Text: CiNii    953-954
4013 3D inelastic analysis of plate-fin structure with fin offset  Full Text: CiNii    955-956
4014 Prediction of Inelastic Stress-Strain Behavior of Spherical Tube Sheet  Full Text: CiNii    957-958
4015 Thermal hydraulic-structure total analysis of core support structure  Full Text: CiNii    959-960
4016 Evolution Equation of Creep Damage Under Stress Variation  Full Text: CiNii    961-962
4017 Several Techniques for Improving the Detection Probability of the Magnetic Camera  Full Text: CiNii    963-964
4018 Method for Quantitative Evaluation of Dimple Fracture Surface using Run Length  Full Text: CiNii    965-966
4019 Influence of Steam on Oxidation and Cracking Behaviors of a Nickel Base Superalloy Under Bending Stress in High Temperature Environments  Full Text: CiNii    967-968
4020 Evaluation of Material Degradation of Turbine Rotor Steel by Hydrogen Desorption Spectrum Analysis  Full Text: CiNii    969-970
4021 Evaluation of Critical Crack Sizes for Fossil Power Plant Components : Part I: Study on Fracture Criteria and Fracture Loads  Full Text: CiNii    971-972
4022 Evaluation of Critical Crack Sizes for Fossil Power Plant Components : Part II: Propose of Elavuation Method for Critical Crack Sizes  Full Text: CiNii    973-974
4023 Thermal Fatigue Crack Extension Test of Rotor Casing Material  Full Text: CiNii    975-976
4024 The Estimation of Creep Crack Growth Rate at the Heat Affected Zone of Welded Joint for 9%Cr Ferritic Heat Resistant Steel Based on Q^* concept  Full Text: CiNii    977-978
4025 The Effect on Life Extension on Welding Zone of The Aging Boiler by The Diffusion of Boron  Full Text: CiNii    979-980
4040 Advanced Heat-Resistant Magnesium Alloys : LPO Mg-Zn-RE Alloys  Full Text: CiNii    981-982
4041 Characteristics of high-performance magnesium alloy materials in compressive deformation  Full Text: CiNii    983-984
4042 Comparison of deformability performance in magnesium alloy casting materials  Full Text: CiNii    985-986
4043 Fatigue Strength of Notched Specimens of Non-combustible Magnesium Alloy  Full Text: CiNii    987-988
4044 Effect of Mean Stress on Fatigue Strength of Non-combustible Magnesium Alloy  Full Text: CiNii    989-990
4045 Plastic Buckling Behavior of AZ31B Magnesium Alloy Pipe  Full Text: CiNii    991-992
4046 Effect of anodized layer on fatigue mechanism of magnesium alloy  Full Text: CiNii    993-994
4047 Monte Carlo Simulation of Crystal Structures of Ni, Fe, Ni-Ti  Full Text: CiNii    995-996
4048 Monte Carlo Simulation of Stress Corrosion Cracking in Structural Materials under Nonuniform Stress Condition  Full Text: CiNii    997-998
4049 Development of Measurement System Based on the Caustics Method Using Java : Accuracy of Contact Force Measurement  Full Text: CiNii    999-1000
4050 Estimating Each element of Joint stiffness matrix using Neural network  Full Text: CiNii    1001-1002
4051 Estimation of Pipe Internal Fully Circumferential Crack by Means of The Influence Function Method  Full Text: CiNii    1003-1004
4052 The Influence of Colled Rolling Ratio on the Behavior of Fatigue Crack Propagation Path in Pure Aluminum Sheets  Full Text: CiNii    1005-1006
4053 Study of Frictional Mechanism of Fatigue Crack Surface under Mode III Loading  Full Text: CiNii    1007-1008
4054 Evaluation of Crack Propagation Characteristics of Ceramics : Crack Length Measurement by Using Compliance Method  Full Text: CiNii    1009-1010
4055 Study of Small Crack Propagation Behavior Measurement Method by Magnetostrictive Effect  Full Text: CiNii    1011-1012
4056 Shear-type fatigue crack growth in SUJ2  Full Text: CiNii    1013-1014
4057 Evaluation of Rupture Life in Solder Joints using Automatic Crack Propagation Analysis  Full Text: CiNii    1015-1016
4058 Influence of Physiological Salt Solution on Small Fatigue Crack Growth Behavior of Dental Au-Ag-Pd Alloy  Full Text: CiNii    1017-1018
4059 Influence of Stress Ratio on Fatigue Crack Growth Threshold Behavior of Ti-6Al-4V at Elevated Temperature  Full Text: CiNii    1019-1020
4060 A Study on craze Development of the Chemical Environment under in Polycarbonate  Full Text: CiNii    1021-1022
4061 The finite element analysis for fatigue crack propagation behaviors of polymer blends  Full Text: CiNii    1023-1024
奥付  Full Text: CiNii   

PAGE TOP