Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics The Japan Society of Mechanical Engineers 2003 (20030909)

 CiNii Books

COVER  Full Text: CiNii   
[OTHERS]  Full Text: CiNii    -"ii"
Welcome to Nagoya  Full Text: CiNii    iii
[OTHERS]  Full Text: CiNii    v-xiii
CONTENTS  Full Text: CiNii    xiv-liii
[OTHERS]  Full Text: CiNii    liv-1
PL-1(PL1W0032) On Smart Materials, Smart Structures and Damage Detection  Full Text: CiNii    3
PL-2(PL2W0466) On the Fatigue and Fracture of "Nano" and "Bio" Materials  Full Text: CiNii    4
PL-3(PL3W0400) Diffraction Measurement of Residual Micro and Macro Stresses  Full Text: CiNii    5
[OTHERS]  Full Text: CiNii    7-
GS(1)-1(GSW0378) The Effect of Temperature on Morphology and Relaxation Behavior of PA  Full Text: CiNii    11
GS(1)-2(GSW0339) The Degradation of PEEK Sheets Accelerated by Stress in a Real Space Environment Based on the Space Exposure Experiment  Full Text: CiNii    12
GS(1)-3(GSW0381) Elastic-Viscoplastic Behavior of CFRP Laminates : Effect of Fiber Distribution  Full Text: CiNii    13
GS(1)-4(GSW0315) Fracture Behavior of Life-Controllable Smart Concrete Using the Recycled PET Resin  Full Text: CiNii    14
GS(1)-5(GSW0401) Morphology, Micromechanical Properties and Microyielding of Polymers  Full Text: CiNii    15
GS(2)-6(GSW0153) CTOA of a Tunneling Crack-a Hybrid Analysis  Full Text: CiNii    16
GS(2)-7(GSW0260) Detection of Subsurface Delamination Using Laser Speckle Strain Gauge for Thermal-Barrier-Coated Stainless Steel under High Temperature Fatigue Condition  Full Text: CiNii    17
GS(2)-8(GSW0330) Tooth Root Stress Analysis of Plastic Gears Combining White Light Photoviscoelastic and Digital Correlation Techniques  Full Text: CiNii    18
GS(2)-9(GSW0331) Measurement of Surface Displacement by Phase-Shifting Image Digital Holography  Full Text: CiNii    19
GS(2)-10(GSW0338) Fatigue Sensor Using Diffusion of Laser Light  Full Text: CiNii    20
GS(2)-11(GSW0444) A New Method of Measuring Aspherical Optical Surface  Full Text: CiNii    21
OS1(1)-1(OS01W0261) Opto-Electronic Techniques for Measurement/Monitoring of Vibration  Full Text: CiNii    22
OS1(1)-2(OS01W0244) Measurement of Crack Opening Displacement and Energy Release Rate of Rapidly Bifurcating Cracks by High-Speed Holographic Microscopy  Full Text: CiNii    23
OS1(1)-3(OS01W0279) Measurement of the Crack Opening Displacement of Rapidly Bifurcating Crack on Both Surfaces of PMMA Specimens  Full Text: CiNii    24
OS1(1)-4(OS01W0028) Full-Field Dynamic Photoelastic Studies of Transversely Impacted Beams  Full Text: CiNii    25
[OTHERS]  Full Text: CiNii   
OS7(1)-1(OS07W0160) Residual Stress and Strain in the Artery Wall : from Macroscopic to Microscopic Viewpoint  Full Text: CiNii    29
OS7(1)-2(OS07W0226) Experimental Study of Dynamic Mechanical Properties of Rabbit Knee Ligaments  Full Text: CiNii    30
OS7(1)-3(OS07W0228) Strain-Rate and Muscle-Tonus Dependence of Mechanical Properties of Rabbit Tibialis Anterior Muscle  Full Text: CiNii    31
OS7(2)-4(OS07W0159) Effects of Microstructures on Fatigue Properties of Dental Drawn and Cast Ag-Pd-Cu-Au-Zn Alloys  Full Text: CiNii    32
OS7(2)-5(OS07W0142) Fatigue Characteristics of Low Rigidity Titanium Alloy, Ti-29Nb-13Ta-4.6Zr, for Biomedical Applications  Full Text: CiNii    33
OS7(2)-6(OS07W0195) Effect of Ta Content on Young's Modulus and Microstructures of Binary Ti-Ta Alloys  Full Text: CiNii    34
OS7(2)-7(OS07W0157) Effect of Nb Content on Mechanical Properties of Ti-Nb-Ta-Zr Quaternary Alloys Fabricated by Powder Metallurgy Processing for Biomedical Applications  Full Text: CiNii    35
OS7(3)-8(OS07W0393) Experimental Evaluation of Scaffold/Biofactor Constructs for Bone Tissue Engineering  Full Text: CiNii    36
OS7(3)-9(OS07W0402) Elastic Properties of Single Trabeculae Measured by Micro-Three-Point Bending Test  Full Text: CiNii    37
OS7(3)-10(OS07W0213) Identification of in Vivo Displacement Field via X-Ray CT Images  Full Text: CiNii    38
OS7(3)-11(OS07W0041) Durable PAN Gels Prepared by the Thermal Treatment to PAN Fibers  Full Text: CiNii    39
[OTHERS]  Full Text: CiNii   
OS3(1)-1(OS03W0354) Hybrid Thermal Methods in Experimental Stress Analysis  Full Text: CiNii    43
OS3(1)-2(OS03W0099) Stress Separation in Thermoelastic Stress Analysis Using Nonlinearity of the Thermoelastic Effect  Full Text: CiNii    44
OS3(1)-3(OS03W0061) Stress-Components Analysis by Inverse Problem Using Infrared Thermography  Full Text: CiNii    45
OS3(2)-4(OS03W0436) Commingling Thermoelasticity with Other Experimental, Analytical and Numerical Tools  Full Text: CiNii    46
OS3(2)-5(OS03W0358) Applications of Experimental Stress Separation Technique Using Thermoelasticity and Photoelasticity to Fracture Mechanics  Full Text: CiNii    47
OS3(2)-6(OS03W0395) The Effect of Heat Conduction on Stress Concentration Factors and Stress Intensity Factors Determined by Thermoelastic Stress Analyses  Full Text: CiNii    48
OS3(2)-7(OS03W0382) Measurement of Contact Pressure Distributions between Mechanical Components by Thermoelasticity  Full Text: CiNii    49
OS3(3)-8(OS03W0417) Machining and Grinding Temperatures  Full Text: CiNii    50
OS3(3)-9(OS03W0386) Characterization of Professional Knifes by Thermoelasticity  Full Text: CiNii    51
OS3(3)-10(OS03W0418) Thermographic Signal Reconstruction for NDE and Materials Characterization  Full Text: CiNii    52
OS3(3)-11(OS03W0359) Development of a Quantitative Thermographic NDT Based on Transient Temperature Measurement  Full Text: CiNii    53
[OTHERS]  Full Text: CiNii   
OS11(1)-1(OS11W0187) Effects of Frictional Wear Characteristics and Microstructure on Fretting Fatigue Strength of High Workable Titanium Alloy, Ti-4.5Al-3V-2Mo-2Fe  Full Text: CiNii    57
OS11(1)-2(OS11W0243) Evaluation of Crack Initiation Limit in Fretting Fatigue Based on the Singular Stress Field near the Contact Edge  Full Text: CiNii    58
OS11(1)-3(OS11W0383) Non-Propagating Crack at Ultra High Cycle Fretting Fatigue Limit  Full Text: CiNii    59
OS11(1)-4(OS11W0289) Study on Contact Rolling Fatigue of Rails  Full Text: CiNii    60
OS11(2)-5(OS11W0385) Gigacycle Fatigue and Fatigue Crack Growth  Full Text: CiNii    61
OS11(2)-6(OS11W0239) Ultrasonic Bending Fatigue Testing Method for Thin Sheet Materials  Full Text: CiNii    62
OS11(2)-7(OS11W0374) Effect of Test Frequency on Ultralong Life Fatigue Strength  Full Text: CiNii    63
OS11(2)-8(OS11W0139) Fatigue Life Prediction for Bearing Steel with Respect to Inclusion Induced Fracture in Rotating Bending  Full Text: CiNii    64
OS11(2)-9(OS11W0286) Fatigue Properties of High Strength Steel under Two-Step Stress Amplitude  Full Text: CiNii    65
OS11(3)-10(OS11W0462) Changes in Fatigue Damage Due to Mean Stress and Overloads in Axial and Biaxial Fatigue  Full Text: CiNii    66
OS11(3)-11(OS11W0026) Modeling of Crack Initiation and Simulation of Low Cycle Fatigue Damage in Biaxial Stress States  Full Text: CiNii    67
OS11(3)-12(OS11W0458) Fatigue Crack Propagation from a Pre-Crack under Combined Torsional and Axial Loading  Full Text: CiNii    68
[OTHERS]  Full Text: CiNii   
OS4(1)-1(OS04W0010) GIXRD Residual Stress Analysis on CVD Tantalum Thin Films  Full Text: CiNii    71
OS4(1)-2(OS04W0204) Effect of Powder Target on Crystal Orientation and Residual Stress in Sputtered GaN Film  Full Text: CiNii    72
OS4(1)-3(OS04W0430) X-ray Stress Measurement and Deformation Behavior of Zirconia Thermal Barrier Coatings  Full Text: CiNii    73
OS4(1)-4(OS04W0150) Study of Stress Heterogeneity by Grazing Incident X-Ray Diffraction  Full Text: CiNii    74
OS4(2)-5(OS04W0113) Microhardness Measurements as a Tool for Stress Analysis  Full Text: CiNii    75
OS4(2)-6(OS04W0455) Estimated and Evaluated Residual Stress by Vickers Indentation in Several Structural Ceramics  Full Text: CiNii    76
OS4(2)-7(OS04W0297) A Study on Residual Stress Measurement for Fine Ceramics by Indentation Fracture Method  Full Text: CiNii    77
OS4(2)-8(OS04W0201) Effect of Residual Stress Induced by Laser Irradiation on Magnetic Domain Refinement of Grain-Oriented Silicon Steel  Full Text: CiNii    78
OS4(2)-9(OS04W0427) Optimization of the X-Ray Stress Measurement Condition on Austenitic Stainless Tubes for Electric Power Plants  Full Text: CiNii    79
OS4(3)-10(OS04W0057) Structure and Stress Analysis Using Two-Dimensional X-Ray Diffraction  Full Text: CiNii    80
OS4(3)-11(OS04W0298) Evaluation of Residual Stress Distributions and Stress Intensity Factors Based on Crack Opening Displacement Distribution Measured Along Crack in a Finite Plate  Full Text: CiNii    81
OS4(3)-12(OS04W0372) On the Implementation of the Crack Compliance Method to Measure Residual Stress Distributions  Full Text: CiNii    82
OS4(3)-13(OS04W0014) Analytical Method for Reduction of Residual Stress of Welded Joint Using Filtered White Noise  Full Text: CiNii    83
OS4(3)-14(OS04W0422) Thermal and Residual Stresses with Microstructural Transformation Effect Due to Welding Heat Cycles  Full Text: CiNii    84
[OTHERS]  Full Text: CiNii   
OS5(1)-1(OS05W0295) Deformation Behaviour of Ceramics under Repeating Nanoindentation  Full Text: CiNii    87
OS5(1)-2(OS05W0162) Error Factors of Micro-Indentation Tests  Full Text: CiNii    88
OS5(1)-3(OS05W0282) Sensitive Mapping of Nano-Scale Elasticity Using Contact Resonance of a Mass-Concentrating AFM Cantilever  Full Text: CiNii    89
OS5(1)-4(OS05W0022) Wetting Behavior of Micro-Water on Pure Chromium  Full Text: CiNii    90
OS5(2)-5(OS05W0392) Combination of Electron Back Scattering Diffraction and Atomic Force Microscopy Investigations for the Study of Slip Bands Induced by Fatigue in a Stainless Steel  Full Text: CiNii    91
OS5(2)-6(OS05W0361) Characterization of Fatigue Crack Initiation in α-Brass by Means of AFM and EBSP  Full Text: CiNii    92
OS5(2)-7(OS05W0273) AFM Observation of Evolution of Slip Deformation by High Cycle Fatigue in Low Carbon Steels  Full Text: CiNii    93
OS5(2)-8(OS05W0121) Quantitative Analysis of the Striation Topography by Using Fractal and Chaos Parameters  Full Text: CiNii    94
OS5(2)-9(OS05W0161) Effects of Stress Waveform and Wet Environment on Fatigue Fracture Behavior of Aramid Single Fiber and AFM Damage Evaluation  Full Text: CiNii    95
OS5(3)-10(OS05W0314) Atomic Force Microscopy and High Resolution Scanning Electron Microscopy Evidence Concerning Fatigue Crack Nucleation  Full Text: CiNii    96
OS5(3)-11(OS05W0236) Evaluation of Interface Strength of Micro-Components by AFM  Full Text: CiNii    97
OS5(3)-12(OS05W0166) Introduction Method of Sharp Pre-Crack Along Interface Between Thin Film and Substrate  Full Text: CiNii    98
OS5(3)-13(OS05W0303) Hybrid Nano-Characterization of Martensitic Transformation and Degradation for Fe-Pd Shape Memory Alloy Using Atomic and Magnetic Force Microscopy  Full Text: CiNii    99
[OTHERS]  Full Text: CiNii   
OS6(1)-1(OS06W0384) Young's Modulus Measurement of Polysilicon Thin Film Using Thin Film Tensile Tester Equipped with Electrostatic Force Grip  Full Text: CiNii    103
OS6(1)-2(OS06W0033) Measurement of the Fracture Toughness of Micrometer Scale Single Crystal Silicon by Tensile Test Method  Full Text: CiNii    104
OS6(1)-3(OS06W0370) AFM Tensile Test of Sub-Micron Thick DLC Film for Surface Modification in MEMS  Full Text: CiNii    105
OS6(1)-4(OS06W0394) High-Temperature Strain Measurement at the Micrometer Scale  Full Text: CiNii    106
OS6(2)-5(OS06W0390) Deformation Modes of Semi-Conductors : Determined from Nano-Indentation and Transmission Electron Microscopy  Full Text: CiNii    107
OS6(2)-6(OS06W0420) Nanoindentation Technique as a Probe for Characteristic Deformation Size  Full Text: CiNii    108
OS6(2)-7(OS06W0411) Micromechanical Testing of SU-8 Cantilevers  Full Text: CiNii    109
OS6(2)-8(OS06W0416) Reliability Assessment for MEMS Actuator through Analysis of Resonant Frequency Variation with Defect Growth  Full Text: CiNii    110
OS6(2)-9(OS06W0421) Fracture and Fatigue of Micro-Sized Specimens for MEMS/MST Applications  Full Text: CiNii    111
OS6(3)-10(OS06W0409) Characterization of Thin Films for MEMS Optical and Electrical Device Packaging Applications  Full Text: CiNii    112
OS6(3)-11(OS06W0429) Micro-Nano Electromechanical Systems by Silicon Bulk-Micromachining  Full Text: CiNii    113
OS6(3)-12(OS06W0426) MEMS Device Characterization for Repeated Cyclic Operation  Full Text: CiNii    114
OS6(3)-13(OS06W0415) Subtle Non-Newtonian Property Measurement of Micro Fluids Using Squeeze Flow Rheometry  Full Text: CiNii    115
[OTHERS]  Full Text: CiNii   
OS9(1)-1(OS09W0272) Damage Evolution during Thermo-Mechanical Fatigue in a Unidirectionally Reinforced SP-700/SCS-6 Composite  Full Text: CiNii    119
OS9(1)-2(OS09W0347) Suppression Effect for Mode I Propagation of Delamination Cracks in a Laminated Composite by Using Thin SMA Plates  Full Text: CiNii    120
OS9(1)-3(OS09W0440) The Effect of Shape Memory Alloy TiNi Actuator on Suppression of Mode II Delamination Crack in CFRP Laminates  Full Text: CiNii    121
OS9(1)-4(OS09W0183) Fatigue Behavior of CFRP Cross-Ply Laminates under Axial Cyclic Load  Full Text: CiNii    122
OS9(2)-5(OS09W0086) Fracture Mechanics Research in Continuous Fiber Reinforced Composites  Full Text: CiNii    123
OS9(2)-6(OS09W0085) Study on Bending Properties of FRP Cylinders  Full Text: CiNii    124
OS9(2)-7(OS09W0039) Finite Element Analysis of Progressive Failure for Composite Materials Using a Failure Criterion with Interaction Terms  Full Text: CiNii    125
OS9(2)-8(OS09W0185) Micromechanical Stress Formation and Initial Matrix Failure in Fiber Model Composites under Consideration of Plastic Deformation during Cooling Down  Full Text: CiNii    126
OS9(3)-9(OS09W0294) Application of Localized Flexibility Method to Damage Detection of CFRP Space Frame  Full Text: CiNii    127
OS9(3)-10(OS09W0090) Monte Carlo Simulation on Fracture Behavior of Unidirectional Fiber Reinforced Ceramics Based on Mesomechanics  Full Text: CiNii    128
OS9(3)-11(OS09W0089) A Comparison Between Active and Passive Piezoelectric Elements for Damage Detection in Fiber : Reinforced Composite Laminates  Full Text: CiNii    129
OS9(3)-12(OS09W0202) Damage and Strength for Notched Plates of Short Glass Fiber Reinforced Polypropylene  Full Text: CiNii    130
[OTHERS]  Full Text: CiNii    131-
OS1(2)-5(OS01W0438) Phase Shifting Technique for Closed-Fringe Analysis by Fourier Transform Method  Full Text: CiNii    135
OS1(2)-6(OS01W0200) Sub-Micron Displacement Measurement Using a Digital Image Correlation Method  Full Text: CiNii    136
OS1(2)-7(OS01W0221) Evaluation of Deformation of Sheets of Recycled Paper with Different Fiber Directions Using Electronic Speckle Pattern Interferometry  Full Text: CiNii    137
OS1(2)-8(OS01W0220) Measurement of Deformation of Wood Joints Using Electronic Speckle Pattern Interferometry  Full Text: CiNii    138
OS1(3)-9(OS01W0265) Photoelastic Investigation of Modified Hertz Contact Theory  Full Text: CiNii    139
OS1(3)-10(OS01W0036) Photoelastic Tomography in Linear Approximation  Full Text: CiNii    140
OS1(3)-11(OS01W0277) A Novel Approach for Full-Field Measurement of Principal Stress Directions in Photoelasticity  Full Text: CiNii    141
OS1(3)-12(OS01W0006) Identification of Photoelastic Parameters through Digital Image Processing and Phase Shifting Method  Full Text: CiNii    142
OS1(3)-13(OS01W0035) A Discrete Algorithm of Integrated Photoelasticity for Axisymmetric Problems  Full Text: CiNii    143
OS1(4)-14(OS01W0414) High-Speed Phase-Shifting Method for Shape Measurement Using Digital Micro-Mirror Device  Full Text: CiNii    144
OS1(4)-15(OS01W0152) Application of Phase-Shifting Moire Interferometry to Thermal Strain Analysis of Electronic Package  Full Text: CiNii    145
OS1(4)-16(OS01W0302) Fringe Analysis by Fourier Transform Phase-Shifting Method for Four-Beam Moire Interferometry  Full Text: CiNii    146
OS1(4)-17(OS01W0437) Micro-Components Evaluation Using Optical Techniques  Full Text: CiNii    147
OS1(4)-18(OS01W0077) Fundamental Study of Caustic Experimental Method in Thermal Stress Analysis : Investigation for One or Two Dimensional Stress Field in Circular Disk  Full Text: CiNii    148
[OTHERS]  Full Text: CiNii   
OS2(1)-1(OS02W0208) Laser Ultrasonic for Property Evaluation of Materials  Full Text: CiNii    151
OS2(1)-2(OS02W0013) A Functional Electromagnetic Acoustic Transducer for Optimum Lamb Wave Modes with Multi-Wavelengths  Full Text: CiNii    152
OS2(1)-3(OS02W0060) Influence of Contact Pressure on Guided Wave Propagation at Contact Interface  Full Text: CiNii    153
OS2(1)-4(OS02W0313) Ultrasonic Guided Wave Calculation for Pipe Diagnostics  Full Text: CiNii    154
OS2(2)-5(OS02W0325) Non-Contact Ultrasonic Measurements for Manufacturing Applications  Full Text: CiNii    155
OS2(2)-6(OS02W0389) Non-Contact Generation of Focused Lamb Waves by Laser and Analysis of its Performance  Full Text: CiNii    156
OS2(2)-7(OS02W0287) Ultrasonic Characterization of Interface of Metals  Full Text: CiNii    157
OS2(2)-8(OS02W0110) Evaluation of Plane Inhomogeneous Stress Field by Ultrasonic Boundary Measurements  Full Text: CiNii    158
OS2(3)-9(OS02W0306) Application of Giant-Magneto-Resistance-Sensors for the Characterization of the Cyclic Deformation Behavior of Steel  Full Text: CiNii    159
OS2(3)-10(OS02W0045) Real-Time Measurement of Ultrasonic Wave in Low-Cycle Fatigue Testing  Full Text: CiNii    160
OS2(3)-11(OS02W0120) Change of Ultrasonic Attenuation and Microstructure Evolution During Creep of Nickel Base Superalloy  Full Text: CiNii    161
OS2(3)-12(OS02W0241) Development of Ultrasonic On-Line Sensors for Molten Metal Monitoring  Full Text: CiNii    162
[OTHERS]  Full Text: CiNii   
OS12(1)-1(OS12W0115) Sampling and Risk Assessment Method for Metallurgical Inspection of Pipes and Reservoirs  Full Text: CiNii    165
OS12(1)-2(OS12W0341) Risk-Based Maintenance System for Steam Turbines  Full Text: CiNii    166
OS12(1)-3(OS12W0431) A Life-Assessment Method for a Low-Pressure Steam-Turbine Rotor  Full Text: CiNii    167
OS12(1)-4(OS12W0356) Remote Damage-Diagnosis of Hot-Gas-Path Components of Gas Turbines  Full Text: CiNii    168
OS12(2)-5(OS12W0363) Influence of the Multiaxial Stress State on Component Failure in the Creep Range  Full Text: CiNii    169
OS12(2)-6(OS12W0072) Creating Highly Triaxial Stresses in Stainless Steel  Full Text: CiNii    170
OS12(2)-7(OS12W0024) Crack Propagation Behavior in Precracked Specimens under Cyclic Torsion  Full Text: CiNii    171
OS12(2)-8(OS12W0304) A Criterion for the Determination of the Fatigue Limit of Defect-Containing Components under Out-Of-Phase Axial/Torsional Loading  Full Text: CiNii    172
OS12(2)-9(OS12W0344) On the Reliability of Cable Appling to Front Steering System in Vehicle  Full Text: CiNii    173
OS12(3)-10(OS12W0456) Materials Aging and Structural Reliability : A Case for Science Based Probability Modeling  Full Text: CiNii    174
OS12(3)-11(OS12W0463) Feature and Component Tests for Support and Verification of New Modelling Techniques of Creep and Creep Fatigue Deformation and Damage  Full Text: CiNii    175
OS12(3)-12(OS12W0391) Advanced Creep Damage Analysis of Low-Alloy Steel Welds Considering the Microscopic Damage Progress  Full Text: CiNii    176
OS12(3)-13(OS12W0379) Performance of Repair Welds on Aged 2.25Cr-1Mo Steel  Full Text: CiNii    177
[OTHERS]  Full Text: CiNii   
OS11(4)-13(OS11W0128) The Improvement of High Cycle Fatigue Properties of AC4CH Alloy with Shot Peening Treatment  Full Text: CiNii    181
OS11(4)-14(OS11W0131) Improvement of Fatigue Strength on Duralumin by Cavitation Shotless Peening  Full Text: CiNii    182
OS11(4)-15(OS11W0293) Effect of Surface Treatment on Torsional Fatigue Properties of Machine Structural Steel  Full Text: CiNii    183
OS11(4)-16(OS11W0266) Fatigue Fracture Properties in Surface Film-Bonded Materials Using Pure Copper and Commercial Grade Iron Films  Full Text: CiNii    184
OS11(4)-17(OS11W0021) Fatigue Behavior of Thermally Sprayed Materials at High Temperature  Full Text: CiNii    185
OS11(5)-18(OS11W0106) A New Approach to Notch Fatigue Problems-Basic Conception, Modeling and Applications  Full Text: CiNii    186
OS11(5)-19(OS11W0080) The Effect of Compressive Mean Stress on Fatigue Properties of Notched Structural Steel  Full Text: CiNii    187
OS11(5)-20(OS11W0081) Optimum Deformation Value of Notched Eutectoid Steel by Roller Working  Full Text: CiNii    188
OS11(5)-21(OS11W0016) Effect of Ferritic-Austenitic Phase Fraction on Corrosion Fatigue Behavior in Stainless Steels  Full Text: CiNii    189
OS11(5)-22(OS11W0355) Effects of High Vacuum Environment on High Cycle Fatigue Properties of Ti-6Al-4V alloy  Full Text: CiNii    190
OS11(6)-23(OS11W0019) Fatigue Damage Development and Growth in Fiber Reinforced Polymeric Composites  Full Text: CiNii    191
OS11(6)-24(OS11W0238) Fatigue Damage Characterization via Plasticity-Induced Martensitic Transformation Around a Part-Through Crack in SUS304 Stainless Steel  Full Text: CiNii    192
OS11(6)-25(OS11W0094) Study on Service Performance of Automobile Steel Sheets  Full Text: CiNii    193
OS11(6)-26(OS11W0284) Effect of Sn Content on Fatigue Properties of Extra-Low Carbon Steels  Full Text: CiNii    194
[OTHERS]  Full Text: CiNii   
OS4(4)-15(OS04W0288) New Monochromator Performances Based on Bragg Diffraction Optics for High-Resolution Neutron Strain/Stress Diffractometers  Full Text: CiNii    197
OS4(4)-16(OS04W0182) Neutron Diffraction Study of Residual Stress in the Induction Hardened S45C Round Bar  Full Text: CiNii    198
OS4(4)-17(OS04W0082) Anisotropic Residual Stresses in a Pearlitic Steel after Tensile Deformation  Full Text: CiNii    199
OS4(4)-18(OS04W0210) X-Ray and Neutron Diffraction Measurements of Residual Stresses in Cr, CrN and CrN on Cr Interlayer Films Deposited by Arc-Ion-Plating  Full Text: CiNii    200
OS4(5)-19(OS04W0319) Measurement of Local Minute Strain by Using Synchrotron X-Ray Microbeam  Full Text: CiNii    201
OS4(5)-20(OS04W0320) Residual Stress Analyses in Laser Single Pulse Irradiated Area Using Synchrotron Radiation  Full Text: CiNii    202
OS4(5)-21(OS04W0318) Residual Stress Measurements on Cu Thin Films with Various Thicknesses Using Synchrotron Radiation  Full Text: CiNii    203
OS4(5)-22(OS04W0203) Evaluation of Internal Stresses in Single-, Double- and Multi-Layered TiN and TiAlN Thin Films by Synchrotron Radiation  Full Text: CiNii    204
OS4(5)-23(OS04W0029) Estimation of Spalling Stress in Thermal Barrier Coatings Using High-Energy X-Rays from a Synchrotron Source  Full Text: CiNii    205
OS10(1)-1(OS10W0109) Reliability Study on Sn-Ag-Cu and Sn-Zn-Bi Lead-Free Solder Joints and Their Intermetallic Compounds  Full Text: CiNii    206
OS10(1)-2(OS10W0196) Fatigue Strength Evaluation for Sn-Zn-Bi and Sn-Zn Lead-Free Solder Joints  Full Text: CiNii    207
OS10(1)-3(OS10W0412) Thermomechanical Behavior of a Soldered Joint, Studied by Real-Time Electrical Resistivity Measurement  Full Text: CiNii    208
OS10(1)-4(OS10W0154) Mechanical Properties of Lead-Free Solders Predicted by Indentation Testing  Full Text: CiNii    209
[OTHERS]  Full Text: CiNii   
GS(3)-12(GSW0459) Use of Thermography for the Evaluation of the Behaviour of Different Tyre Patches  Full Text: CiNii    213
GS(3)-13(GSW0119) Experimental Investigation and Modeling of Temperature Dependency Behavior of High Damping Rubber  Full Text: CiNii    214
GS(3)-14(GSW0092) Effects of Texture and Point Defect on Ultrasonic Wave Velocities and Examination of Orientation Effects on Point Defect Growth Estimated by Cross Slip Simulations  Full Text: CiNii    215
GS(3)-15(GSW0132) A Proposal of the MUSIC Algorithm for Short-Range Signal Sources and the Application for the Location Finding  Full Text: CiNii    216
GS(3)-16(GSW0307) Digital Holography Applied to Gratings Implemented into Polymeric Surfaces  Full Text: CiNii    217
OS8(1)-1(OS08W0025) Fracture Behavior of Novel Porous Silicon  Full Text: CiNii    218
OS8(1)-2(OS08W0100) Advanced Structural Design and Evaluation in Synergy Ceramics  Full Text: CiNii    219
OS8(1)-3(OS08W0163) Measurement of Lattice Defect and Local Strain in Polished Sapphire by Transmission Electron Microscopy  Full Text: CiNii    220
OS8(1)-4(OS08W0217) Development of Strain Evaluation Method Using Micro-Focus X-Ray Beam  Full Text: CiNii    221
OS8(1)-5(OS08W0215) Estimation of Elastic Modulus of Polycrystalline Ceramics Using Microstructural Grain Model  Full Text: CiNii    222
OS8(2)-6(OS08W0015) Multi-Scale Modeling and Analysis of Heterogeneity in Ceramics  Full Text: CiNii    223
OS8(2)-7(OS08W0101) Image-Based Modeling with High Resolution X-Ray CT for Porous Alumina and Elastic Analysis with Homogenization Method  Full Text: CiNii    224
OS8(2)-8(OS08W0126) Grain Level Modeling and Simulations of Crack Propagation in Polycrystalline Ceramics  Full Text: CiNii    225
OS8(2)-9(OS08W0450) Numerical Simulation of Fracture Behavior of Brittle Materials Based on Micro-Crack Formation  Full Text: CiNii    226
[OTHERS]  Full Text: CiNii   
OS6(4)-14(OS06W0368) Characterization of Structural Films Using Microelectromechanical Resonators  Full Text: CiNii    229
OS6(4)-15(OS06W0098) Influence of Electric Field on Fracture Toughness and Fatigue Crack Growth for an Actuator Piezo-Ceramic PIC151  Full Text: CiNii    230
OS6(4)-16(OS06W0425) The Fracture Toughness and Fatigue Properties of Micro Sized High Strength γ-TiAl  Full Text: CiNii    231
OS6(4)-17(OS06W0114) Feasibility Study on Application of Polymer Matrix Composite Materials to Micoscale Structures  Full Text: CiNii    232
OS6(4)-18(OS06W0141) Analysis of Crack Propagation Behavior in Nano Size hcp Crystals by Molecular Dynamic Method  Full Text: CiNii    233
OS6(5)-19(OS06W0407) Mechanical Testing of Materials in Small Volumes by Nanoindentation and Microbeam Bending  Full Text: CiNii    234
OS6(5)-20(OS06W0419) Mechanical Strength of Metallic Thin-Film Interfaces  Full Text: CiNii    235
OS6(5)-21(OS06W0405) Characterization of Amorphous Electrically Conductive Mo-Si-N Films for Micromechanical Applications  Full Text: CiNii    236
OS6(5)-22(OS06W0137) Acoustic Spectroscopy for Measuring Anisotropic Elastic Constants of Thin Films  Full Text: CiNii    237
OS6(5)-23(OS06W0448) Finite Element Analysis of Elastic Properties of Textured Thin Films  Full Text: CiNii    238
OS6(6)-24(OS06W0434) Mechanical and Thermal Properties of Thin Metallic Foils and Wires Using Laser Techniques  Full Text: CiNii    239
OS6(6)-25(OS06W0274) Effect of Size and Shape of Specimen on Mechanical Properties in Thin Sheet of SUS304 Stainless  Full Text: CiNii    240
OS6(6)-26(OS06W0380) Recent Developments of Surface Nanocristalization of Metallic Material  Full Text: CiNii    241
OS6(6)-27(OS06W0396) Characteristic Mechanical Properties of High-Density Nanocrystalline Gold  Full Text: CiNii    242
OS6(6)-28(OS06W0399) Characterization and Mechanical Properties of High-Density Nanocrystalline Copper  Full Text: CiNii    243
[OTHERS]  Full Text: CiNii   
OS9(4)-13(OS09W0053) Matrix Crack Detections of CFRP Using Electric Resistance Changes  Full Text: CiNii    247
OS9(4)-14(OS09W0096) Effect of Loading and Thermal History on Electric Resistance in CFRP  Full Text: CiNii    248
OS9(4)-15(OS09W0167) Damage Detection of Hybrid CFRP Reinforcements by DC Measurement Technique  Full Text: CiNii    249
OS9(4)-16(OS09W0184) Health Monitoring of CFRP Strand Cables by Electrical Resistance Method  Full Text: CiNii    250
OS9(4)-17(OS09W0222) Electromagnetic Acoustic Transducers for Detection of Delamination in GFRP Laminates  Full Text: CiNii    251
OS9(5)-18(OS09W0052) Monitoring of Damage and Strain in Carbon Fiber Polymer-Matrix Structural Composites by Electrical Resistance Methods  Full Text: CiNii    252
OS9(5)-19(OS09W0285) An Experimental Study on Applicability of Passive Electric Potential CT Method to Crack Identification  Full Text: CiNii    253
OS9(5)-20(OS09W0059) Wireless Strain Monitoring of Tires Using Electric Capacitance Changes  Full Text: CiNii    254
OS9(5)-21(OS09W0305) Sensitive Strain Monitoring of SiC Fiber/Epoxy Composite Using Electrical Resistance Change  Full Text: CiNii    255
OS9(5)-22(OS09W0168) Health Monitoring with Electromagnetic Wave Transmission Line  Full Text: CiNii    256
OS9(6)-23(OS09W0194) Detection of Strain Variation Based on Brillouin Spectrum Shape Changing  Full Text: CiNii    257
OS9(6)-24(OS09W0207) Damage Detection of Composite Structures Using a Stabilized Extrinsic Fabry-Perot Interferometric Sensor System  Full Text: CiNii    258
OS9(6)-25(OS09W0225) Structural Health Monitoring Using Transmission/Reflection-Type Hybrid Extrinsic Fabry-Perot Interferometric Optical Fiber Sensors  Full Text: CiNii    259
OS9(6)-26(OS09W0076) Thermal Effect on Crack Closure and Mechanical Behaviors in Shape Memory Alloy Fiber Reinforced Composite  Full Text: CiNii    260
OS9(6)-27(OS09W0317) Unsupervised Damage Detection of CFRP Structure with Statistical Diagnostic Method  Full Text: CiNii    261
[OTHERS]  Full Text: CiNii   
OS1(5)-19(OS01W0435) A Unified Approach for Holography and Shearography in Surface Deformation Measurement and Nondestructive Testing  Full Text: CiNii    267
OS1(5)-20(OS01W0134) Digital Shear for Curvature Determination in Speckle Shearography  Full Text: CiNii    268
OS1(5)-21(OS01W0388) Study of Vibrations in Square Plate and Tweeders Using DSPI and Wavelet Transform  Full Text: CiNii    269
OS1(5)-22(OS01W0027) Shearography in Tire Industry  Full Text: CiNii    270
OS1(6)-23(OS01W0467) Investigating Three-Dimensional Effect on Crack Growth Behavior in an Incompressible Material  Full Text: CiNii    271
OS1(6)-24(OS01W0387) A Study on the Crack Propagation Criterion by the Static Photoelastic Experimental Hybrid Method  Full Text: CiNii    272
OS1(6)-25(OS01W0133) Influence of Anisotropic Properties upon K_I and K_<II> under Biaxial Stress Conditions  Full Text: CiNii    273
OS1(6)-26(OS01W0062) A Study about the Elliptic Inclusion by Optical Method and Finite Element Method  Full Text: CiNii    274
OS1(6)-27(OS01W0308) Evaluation of Notch Tip Strains Using Whole Field Optical Measurement Techniques  Full Text: CiNii    275
[OTHERS]  Full Text: CiNii   
OS2(4)-13(OS02W0410) Damage Evolution in Cement-Based Materials, Studied by Electrical Resistance Measurements  Full Text: CiNii    279
OS2(4)-14(OS02W0428) Quality Assurance Techniques of Amorphous Bonded Joint  Full Text: CiNii    280
OS2(4)-15(OS02W0125) Quantitative Evaluation of Moisture in Encapsulant Resin of IC Packages by Microwaves  Full Text: CiNii    281
OS2(4)-16(OS02W0151) An Effective Transmission Technique of Higher Frequency Ultrasound into a Wafer Level Package  Full Text: CiNii    282
OS2(4)-17(OS02W0433) Nondestructive Testing of Bonding Integrity Between Tiles and Wall Using Sonic-Shearography  Full Text: CiNii    283
GS(8)-34(GSW0146) The Influence of Humidity on Fatigue Crack Propagation Properties in Spherical Graphite Cast Iron  Full Text: CiNii    284
GS(8)-35(GSW0413) The Fatigue Properties of Aluminum Alloy Die Castings  Full Text: CiNii    285
GS(8)-36(GSW0004) Fatigue Behaviour of Sintered Steel Treated under Different Tempering Temperatures  Full Text: CiNii    286
GS(8)-37(GSW0123) Analysis of Hydrogen Behavior in Crack Growth of Gamma-TiAl by Means of Hydrogen Microprint Technique  Full Text: CiNii    287
[OTHERS]  Full Text: CiNii   
OS12(4)-14(OS12W0362) Study on the Low Cycle Fatigue Crack Growth Problem under Mode I+II Mixed Mode Condition  Full Text: CiNii    291
OS12(4)-15(OS12W0360) Characterization of Growth Behavior of Small Mode III Crack Using Compliance Method in Torsional Fatigue  Full Text: CiNii    292
OS12(4)-16(OS12W0248) The Fracture Criterion of a Crack under Mixed I, II and III Modes  Full Text: CiNii    293
OS12(4)-17(OS12W0373) Crack Growth Mechanism and Crack Size Dependency of Mode II and Mode III Fatigue Crack Threshold  Full Text: CiNii    294
OS12(4)-18(OS12W0367) High Cycle Thermal Fatigue Crack Initiation and Growth Behavior in Simulated BWR Water Environment  Full Text: CiNii    295
OS12(5)-19(OS12W0176) Fracture Behaviour of Aramid Short fiber FRP Laminates and the Simulation of Energy Absorption Capability  Full Text: CiNii    296
OS12(5)-20(OS12W0350) Fracture Strength of Tee Pipe with Local Wall Thinning  Full Text: CiNii    297
OS12(5)-21(OS12W0406) Simplified Method to Calculate Stress Intensity Factors for a Surface Crack in a Weld of a Pipe Penetrating a Thick Plate with a Stub Tube  Full Text: CiNii    298
OS12(5)-22(OS12W0143) An Experimental Method to Simulate the Fracture of Faults in Earthquakes, and a Macro-Mechanics Model  Full Text: CiNii    299
OS12(5)-23(OS12W0366) Initiation and Growth of Corrosion Pits and Its Effect on Corrosion Fatigue Strength in 13Cr Stainless Steel  Full Text: CiNii    300
OS12(5)-24(OS12W0017) Evaluation of Sensitization and Corrosive Damage of the Weldment for SUS 316 Steel  Full Text: CiNii    301
[OTHERS]  Full Text: CiNii   
OS11(7)-27(OS11W0034) Microstructural Effects on Fatigue Crack Growth Behavior Near Threshold in a Ni-Base Superalloy  Full Text: CiNii    305
OS11(7)-28(OS11W0257) The Effect of Crystal Orientation Due to Rolling on Fatigue Crack Propagation Behavior in Copper Film  Full Text: CiNii    306
OS11(7)-29(OS11W0316) On the Formation of Striations During Fatigue Crack Growth  Full Text: CiNii    307
GS(7)-29(GSW0171) Surface Toughening of Ceramics by the Shot Blasting  Full Text: CiNii    308
GS(7)-30(GSW0002) Fracture Studies of Aluminum Oxide Coating Containing Chrome Carbide Nanoparticles During Four-Points Bend Test  Full Text: CiNii    309
GS(7)-31(GSW0003) Determining the Fracture of Multi-Layered Coatings by Rheological Modeling of Hertzian Indentation  Full Text: CiNii    310
GS(7)-32(GSW0219) Damage of Marine Craft Propellers in an Estuary  Full Text: CiNii    311
GS(7)-33(GSW0058) Structural Design of 'Smart' Actuator Flaps for Control of Shock Wave/Boundary Layer Interaction  Full Text: CiNii    312
[OTHERS]  Full Text: CiNii   
OS10(2)-5(OS10W0102) Standard Mechanical Testings for Solders : JSMS Recommendation  Full Text: CiNii    315
OS10(2)-6(OS10W0230) Creep-Fatigue Properties of Sn-37Pb Solder Material Evaluated by Room Temperature Testing under Various Strain Waveforms  Full Text: CiNii    316
OS10(2)-7(OS10W0040) Effect of Lead and Lead-Free Solders on Bend of Substrate  Full Text: CiNii    317
OS10(2)-8(OS10W0188) Plasticity-Creep Separate Method for Viscoplastic Deformation of Lead-Free Solders  Full Text: CiNii    318
OS10(2)-9(OS10W0329) Study on Lead-Free Solder Materials and Reliability Analysis  Full Text: CiNii    319
GS(6)-26(GSW0324) The Measurement and Estimation of Creep Crack Growth of a Round Bar Specimen with a Circular Notch for 12Cr Ferritic Heat Resistant Steel  Full Text: CiNii    320
GS(6)-27(GSW0044) Interaction Between Cyclic Plasticity and Creep of Type 304 Stainless Steel  Full Text: CiNii    321
GS(6)-28(GSW0309) Development of a Creep-Fatigue Life Prediction Model for Type 316L Stainless Steels  Full Text: CiNii    322
[OTHERS]  Full Text: CiNii   
OS8(3)-10(OS08W0147) Cracking and Thermal Shock in Porous Materials  Full Text: CiNii    325
OS8(3)-11(OS08W0038) Damage Tolerance Assessment of Synergy Ceramics  Full Text: CiNii    326
OS8(3)-12(OS08W0124) High Temperature and Fatigue Strength of Crack-Healed Silicon Carbide Ceramics  Full Text: CiNii    327
OS8(3)-13(OS08W0214) Effect of Rare Earth Addition on the Mechanical and Wear Properties in Sialon Materials  Full Text: CiNii    328
OS8(4)-14(OS08W0369) Computational Optimization Methods for Designed Functional Materials  Full Text: CiNii    329
OS8(4)-15(OS08W0193) Sliding Wear of Silicon Carbide and Silicon Carbide-Graphite Composite Ceramics  Full Text: CiNii    330
OS8(4)-16(OS08W0290) The Fracture Model of Porous Ceramics Subjected to Mechanical Load  Full Text: CiNii    331
OS8(4)-17(OS08W0404) Microscopic Observation Near Fatigue Crack Tip in Piezoelectric Ceramics by Atomic Force Microscopy and Synchrotron X-ray Diffraction  Full Text: CiNii    332
OS8(4)-18(OS08W0449) Load Frequency Effect on Fatigue Crack Propagation in Porous Silicon Carbide  Full Text: CiNii    333
[OTHERS]  Full Text: CiNii   
GS(4)-17(GSW0064) Thermomechanical Properties of Shape Memory Polymer and Their Applications  Full Text: CiNii    337
GS(4)-18(GSW0097) Bending Fatigue Properties of a TiNi Shape-Memory Alloy Wire  Full Text: CiNii    338
GS(4)-19(GSW0439) Fatigue Crack Propagation and Stress-Induced Martensitic Transformation Behavior in TiNi  Full Text: CiNii    339
GS(4)-20(GSW0253) Analytical Systematization and Experimental Measurement of Unique Performance for Shape Memory Alloy Composite  Full Text: CiNii    340
GS(4)-21(GSW0116) Effect of Processing Parameters on Properties of Aluminum Based MMCs  Full Text: CiNii    341
GS(5)-22(GSW0108) Effect of Radius of Curvature on Bending Properties of Honeycomb Sandwich Curved Panel  Full Text: CiNii    342
GS(5)-23(GSW0189) Time-Temperature Dependent Flexural Behavior of Honeycomb Sandwich Composites  Full Text: CiNii    343
GS(5)-24(GSW0454) Microscopic Buckling and Macroscopic Instability of Periodic Cellular Solids  Full Text: CiNii    344
GS(5)-25(GSW0323) The Role of Air Pressure in Microcellular Foams at High Deformation Rates  Full Text: CiNii    345
[OTHERS]  Full Text: CiNii   
OS9(7)-28(OS09W0212) Health Monitoring in Composite Structures Using Piezoceramic Sensors and Fiber Optic Sensors  Full Text: CiNii    349
OS9(7)-29(OS09W0227) Enhancement of a Spatial Resolution in BOTDA Sensor System Using a Double-Pulse  Full Text: CiNii    350
OS9(7)-30(OS09W0037) Delamination Detection of Composite Beams Using Lamb Waves  Full Text: CiNii    351
OS9(7)-31(OS09W0348) Development and Bending Recovery Properties of Shape Memory Polymer Based Laminates  Full Text: CiNii    352
OS9(8)-32(OS09W0065) Low Velocity Impact Monitoring for a Composite Sandwich Beam Using PVDF Sensor Signals  Full Text: CiNii    353
OS9(8)-33(OS09W0054) Impact Force Identification of CFRP Laminated Plates Using PZT Sensors  Full Text: CiNii    354
OS9(8)-34(OS09W0223) Cure Monitoring of Composite Laminate by Piezoelectric Ceramics Having Different Dimensions  Full Text: CiNii    355
OS9(8)-35(OS09W0063) Piezoresistivity Measurement of CFRP for Reliable Gage Factor  Full Text: CiNii    356
OS9(8)-36(OS09W0264) SMA Strain Sensor for TiNi-Based Smart Composites  Full Text: CiNii    357
[OTHERS]  Full Text: CiNii   
OS1(P)-1(OS01W0192) Shape Detection of a Rotated Object by Recognition of a Light Line Pattern  Full Text: CiNii    361
OS1(P)-2(OS01W0218) A Study on the Rapid 3D measurement by Using Digital Projection Moire  Full Text: CiNii    362
OS2(P)-3(OS02W0030) Nondestructive Evaluation of Spall Damage under Repeated Plate Impact Tests  Full Text: CiNii    363
OS2(P)-4(OS02W0095) Mechanical Property Evaluation Method for Graphite Materials by Ultrasonic Wave Propagation in Porous Body  Full Text: CiNii    364
OS2(P)-5(OS02W0199) Residual Stress Measurement with Acoustoelasticity Using a New-Type Grazing SH-Wave Transducer  Full Text: CiNii    365
OS4(P)-6(OS04W0020) Ferroelectric Domain Observation by X-Ray Diffraction Topography  Full Text: CiNii    366
OS4(P)-7(OS04W0075) Determination of Residual Stress in Sintered Fe-Cr/TiN Composite Material with X-Ray and Neutron Diffraction  Full Text: CiNii    367
OS4(P)-8(OS04W0091) A Comparison of X-ray Stress Measurement Methods for TiN Thin Films Having Fiber Texture near Single Crystal Structure  Full Text: CiNii    368
OS4(P)-9(OS04W0127) The Detection of Internal Fatigue Crack Using X-Ray Stress Measurement  Full Text: CiNii    369
OS4(P)-10(OS04W0158) A Fundamental Study on Neutron Stress Measurement Using Neutron Image Plate (NIP) at Japan Atomic Energy Research Institute (JAERI) : Observation of Neutron Diffraction Ring  Full Text: CiNii    370
OS4(P)-11(OS04W0169) Study of Residual Stress for C/C Composite by Neutron Scattering  Full Text: CiNii    371
OS4(P)-12(OS04W0170) Residual Stress Measurement of Fiber Reinforced Metal Composite by Neutron and X-Ray Diffraction  Full Text: CiNii    372
OS4(P)-13(OS04W0205) Evaluation of Residual Stress in TiN Thin Films Deposited by Arc-Ion-Plating with Synchrotron Radiation  Full Text: CiNii    373
OS4(P)-14(OS04W0209) Characteristic Evaluation of ZrO_2 Film Deposited by DC Magnetron Sputtering  Full Text: CiNii    374
OS4(P)-15(OS04W0237) Residual Stress of Cu/TiN Films Deposited by Ion Plating and RF Sputtering  Full Text: CiNii    375
OS4(P)-16(OS04W0240) Measurement of Residual Stress in Nano-Size Copper Thin Films by Synchrotron Radiation  Full Text: CiNii    376
OS4(P)-17(OS04W0242) Stress Measuring System Using Image Plate for Laboratory X-Ray Experiment  Full Text: CiNii    377
OS4(P)-18(OS04W0258) Residual Stress Measurement of the Quenching Material by the Neutron Diffraction  Full Text: CiNii    378
OS4(P)-19(OS04W0269) Determination of Both Stress and Transformation Fraction in Deformed Dual Phase Stainless Steel Using An Area Detector  Full Text: CiNii    379
OS4(P)-20(OS04W0445) Measurement of Residual Stress Distribution in Shot-Peened Steels by Synchrotron Radiation  Full Text: CiNii    380
OS4(P)-21(OS04W0452) X-Ray Study of Mechanical Properties of TiN Thin Films with <001> Fiber Texture  Full Text: CiNii    381
OS5(P)-22(OS05W0267) Evaluation of Local Work Affected Layer Based on Magnetic Domain Analysis Using Magnetic Force Microscopy  Full Text: CiNii    382
OS5(P)-23(OS05W0268) Nanoscratching on Chromium Carbides in Cold Work Die Steel Using an Atomic Force Microscope  Full Text: CiNii    383
OS5(P)-24(OS05W0349) Phase Structure of PMMA/Silica Nano Composite by XPS Analysis  Full Text: CiNii    384
OS5(P)-25(OS05W0460) Investigation of Fatigue Crack Propagation Behavior in Ultrafine-Grained Steel by AFM and EBSP  Full Text: CiNii    385
OS6(P)-26(OS06W0224) Effect of Ar Gas Pressure on Growth, Structure, and Mechanical Properties of Sputtered Ti Thin Films  Full Text: CiNii    386
OS6(P)-27(OS06W0457) Reduction of Electrical Resistivity in PdCuSi Thin Film Metallic Glass  Full Text: CiNii    387
OS8(P)-28(OS08W0211) A Study on the Mechanical Properties of Silicon Nitride Ceramics Sintered by 28GHz Millimeter-Wave Heating Method  Full Text: CiNii    388
OS11(P)-29(OS11W0023) Effects of Surface Treatment on Fatigue Properties of an lon-Nitriding Low Carbon Steel  Full Text: CiNii    389
OS11(P)-30(OS11W0093) Ultrasonic Spectroscopic Nondestructive Evaluation on Pulsating and Rolling Contact Fatigue Damage  Full Text: CiNii    390
OS11(P)-31(OS11W0447) A Simplified Method for Predicting the Fatigue Limits of Engineering Components with Defects  Full Text: CiNii    391
OS12(P)-32(OS12W0069) Experimental Study on Fatigue Life and Effect of the Excess Cyclic Pressures for the Very Thin Bursting Rupture Discs  Full Text: CiNii    392
OS12(P)-33(OS12W0087) Failure Analysis of Thinned Wall Elbows under Excessive Seismic Loading : Comparison with Experiment  Full Text: CiNii    393
OS12(P)-34(OS12W0443) Elastic-Plastic Fatigue Crack Propagation from Hole in Tubular Stainless-Steel Specimens under Combined Torsional and Axial Loading  Full Text: CiNii    394
OS12(P)-35(OS12W0465) Strength Evaluation of Centrifugally Cast Steel Pipes for Gas Equipment  Full Text: CiNii    395
GS(P)-36(GSW0007) Identification of the Physical Characteristics of a Stress Distribution through Qualitative Three-Dimensional Photoelasticity  Full Text: CiNii    396
GS(P)-37(GSW0136) An Application of Image-Processing to Stress Measurement by Copper Plating Foil : On the Effect of Stress Ratio and Stress Waveform  Full Text: CiNii    397
GS(P)-38(GSW0216) Measurement of Principal-Stress Directions Based on Color Photoelastic Fringes  Full Text: CiNii    398
GS(P)-39(GSW0249) Surface Improvement of A Quenched Gear Using Water Peening by a Cavitation Jet Technique  Full Text: CiNii    399
GS(P)-40(GSW0334) Dynamic Deformation Behavior of Some Rubber Materials by Using Plastic SHPB Technique  Full Text: CiNii    400
GS(P)-41(GSW0371) Accelerated Evaluation of Environmental Ageing Monitored by Fatigue Crack Growth Experiments  Full Text: CiNii    401
GS(P)-42(GSW0403) Phase Stress Measurement in SiCp/Al2024 under Axial Loading by TOF  Full Text: CiNii    402
GS(P)-43(GSW0442) Evaluation of Long Life Fatigue Strength at Ultrasonic Frequency  Full Text: CiNii    403
GS(P)-44(GSW0446) High Functionalization of Ferrous Materials by Solid Nitriding Using Waste Plastics  Full Text: CiNii    404
GS(P)-45(GSW0451) Fatigue Crack Propagation in PZT under Mechanical and Electrical Loadings  Full Text: CiNii    405
GS(P)-46(GSW0461) Application of J Integral to Fatigue Crack Propagation in Vulcanized Natural Rubber  Full Text: CiNii    406
GS(P)-47(GSW0464) Fatigue Properties and Crack Propagation Behavior in Engineering Steels by Ultrasonic Fatigue Testing  Full Text: CiNii    407
GS(P)-48(GSW0468) Fracture Mechanics Approach to Fatigue Crack Propagation Behavior of Shape Memory Alloy  Full Text: CiNii    408
[OTHERS]  Full Text: CiNii    409
Author Index  Full Text: CiNii    411-422
BACKCOVER  Full Text: CiNii   

PAGE TOP