TOP > CiNii Full Text Journal Directory > The Japan Society of Mechanical Engineers > Transactions of the Japan Society of Mechanical Engineers. C > 54(507)

Transactions of the Japan Society of Mechanical Engineers. C The Japan Society of Mechanical Engineers 54(507) (19881125)

表紙 Full Text: CiNii
目次 Full Text: CiNii
[OTHERS] Full Text: CiNii
Experimental Modal Analysis by Means of Time Domain Averaging and Identification Technique Full Text: CiNii	2509-2513
Research on Modal Analysis : 7th Report, Estimation of Variance of the Frequency Response Function Full Text: CiNii	2514-2521
Variance Evaluation of Modal Parameters Identified by Experimental Modal Analysis and Optimization of Accuracy of the Modal Parameters Based on the Variances Full Text: CiNii	2522-2529
Shift Synthesis of Vibration Compliance Based on Sensitivities of a Finite Element Solution Full Text: CiNii	2530-2535
A Proposal of Identification Method of Modal Parameters by Using an Exponential Window Full Text: CiNii	2536-2543
Self-Excited Vibrations of Wire-Winding-Type Growing Equipment for Silicon Single Crystal : 1st Report, Experimental Results and Some Considerations on Self-Excited Vibrations Full Text: CiNii	2544-2549
A Nonparametric Identification Technique of Nonlinear Vibratory Systems : 1st Report, Presentation of the Technique and Its Application to Single-Degree-of-Freedom Vibratory Systems Full Text: CiNii	2550-2556
Experimental Identification of a Mechanical Structure with Characteristic Matrices : 7th Report, Proposition of a Practical and Useful Method Full Text: CiNii	2557-2564
A Study on Leakage-Flow-Induced Vibrations : 3rd Report, Moment of Fluid-Dynamic Forces Acting on the Walls, One of Which is Vibrating with Rotational Mode Full Text: CiNii	2565-2570
A Method of Vibration Analysis by Use of Analytical Solutions Together With the Finite Element Method : 1st Report, Applications to Two-Dimensional Acoustic Problems Full Text: CiNii	2571-2577
The High Mechanical Efficiency of Rolling-Piston Rotary Compressors : 1st Report, Experimental Study Full Text: CiNii	2578-2582
Automatic Generation and Automatic Analysis of Equations of Motion from the Graphic Input of a Vibration Model Full Text: CiNii	2583-2590
Nonlinear Bending Vibration of a Rapidly Driven Flexible Arm Full Text: CiNii	2591-2596
Vibration of Strings with Time-Varying Length : 4th Report, The Case for a Damping Full Text: CiNii	2597-2604
Optimal Vibration Support of Continuous Systems : 1st Report, Search Algorithm for Optimal Location Full Text: CiNii	2605-2609
The Steady State Response of a Rotating Disk to a Concentrated Harmonic Force at a Space-fixed Point Full Text: CiNii	2610-2617
An Experimental Study of Laminated Rubber Bearings for Earthquake Isolation of Buildings : 3rd Report, Breaking Tests for Rubber Bearings of 980-kN Rated Load Full Text: CiNii	2618-2623
Study on the Application Elasto-Plastic Support Device for A Piping System : 1st Report, Device Test and Vibration Test of Piping System Full Text: CiNii	2624-2627
The Drag and Added-Mass Coefficients of Cylinders Vibrating Axially in Water Full Text: CiNii	2628-2632
Hydroelastic Vibrations of Liquid-Filled Finite Length, Rotating Cylindrical Shells Full Text: CiNii	2633-2639
Formulation of Flexible Multibody Systems Full Text: CiNii	2640-2647
Study on Ball Screw-type Electro-magnetic Absorber Full Text: CiNii	2648-2653
Analysis of Vibrational Systems with Coulomb Friction : 1st Report, An Example of Dynamic Damper System Full Text: CiNii	2654-2660
Vibration and Control of a Flexible Rotor Supported by Magnetic Bearings : 1st Report, Control System Analysis and Experiments without Gyroscopic Effects Full Text: CiNii	2661-2668
On the Natural Vibration and Method of Analysis of a Rotating Floppy Disk with a R/W Head System Full Text: CiNii	2669-2674
Low Speed Hunting of the Pneumatically Governed Compression Ignition Engine : 7th Report, Effects of Various Parameters on the Amplitude and Frequency of Limit Cycle : Part 1 Full Text: CiNii	2675-2680
Dynamics of Tendon Vibration Control System for Flexible Beam Full Text: CiNii	2681-2688
Modeling and Attitude Control of Flexible Spacecraft : An Experimental Study by Using a Single-Axis Air-Table Full Text: CiNii	2689-2696
Digital Control System Design Based on the Least Squares Approximation of Open-Loop Transfer Characteristics : 2nd Report, Case of Multivariable System Full Text: CiNii	2697-2701
Motion Control of Underwater Robotic Manipulator : 1st Report, Adaptive Compensation Method of One Directional Fluid Force Full Text: CiNii	2702-2706
Vibrational Characteristics of Air Suspensions by Active Control : 1st Report, Design and Experiment by a PI-Controller and Optimal Regulator Full Text: CiNii	2707-2713
The Study of Semi-Active Suspensions by On-Line Control of Damping Parameter Full Text: CiNii	2714-2717
Dynamical Characteristics Measurement of the Middle Ear of Normal Subjects and Patients with New Developed Measuring Equipment Full Text: CiNii	2718-2722
Improvement of Phase Margin of Controller for An Electromagnetically Borne Rotor with Large Gyroscopic Effect Full Text: CiNii	2723-2728
Studies on the Wear and Failure Temperature of Plastic Gears : 6th Report, On the Temperature Rise When Plastic Gears Break Full Text: CiNii	2729-2734
Dynamical Distinctive Phenomena in a Gear System : Bifurcation Sets of Periodic Solutions and Chaotically Transitional Phenomena Full Text: CiNii	2735-2740
A Study of the Hobbing Method by Radial Feed at the Start of Cutting : Part 1, Hobbing Tests of Helical Gears Full Text: CiNii	2741-2747
Study on a Relief Angle of a TiN-Coated Hob Full Text: CiNii	2748-2752
The Manufacture and Performance of Spheroidal Graphite Cast Iron Gears : 3rd Report, The Load-Carrying Capacity of Gear Pairs with a Combination of Through-Hardened Steel(SCM43S) and As-Cast Spheroidal Graphite Cast Iron(FCD80) Full Text: CiNii	2753-2759
Fastening Characteristics of the Tee-Joint with Sheared Tab and Slot Full Text: CiNii	2760-2764
Effect of Incomplete Threads on the Jump-Out Tensile Failure of Premium Connections for Oil or Gas Wells Full Text: CiNii	2765-2770
DYNAMIC CHARACTERISTICS OF POROUS JOURNAL BEARINGS WITH NONUNIFORM PERMEABILITY Full Text: CiNii	2771-2780
正誤表54巻505号C編 Full Text: CiNii	2780
Studies on the Regular and Reversible Rotation Type Herringbone Grooved Bearing : 1st Report, Load Capacity and Optimum Bearing Parameters for the Oil Film Lubricated Journal Bearing Type Full Text: CiNii	2781-2787
The Effect of Reduced Amounts of Inclusions on the Merchantability of Engineering Steels Full Text: CiNii	2788-2793
A Study on Cutting of Thin Aluminum Alloy Plates by CO_2 Laser Full Text: CiNii	2794-2801
Production Efficiency of Automatic Assembling Lines : The Analytical method for the Branched Line Full Text: CiNii	2802-2805
A Study on Production Lot-Sizing in MRP System : 2nd Report, Multi-Item Lot-Sizing by Group Technology Full Text: CiNii	2806-2811
Frequency Dependence of Internal Friction of Plain Metals for Structural Use Full Text: CiNii	2812-2813
[OTHERS] Full Text: CiNii
奥付 Full Text: CiNii
裏表紙 Full Text: CiNii

PAGE TOP