CiNii Books Author - American Society of Mechanical Engineers. Design Engineering Division

21

Reliability, stress analysis, and failure prevention issues in adhesively bonded and bolted joints, composites design : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas

sponsored by the Design Engineering Division, ASME ; edited by Erol Sancaktar

American Society of Mechanical Engineers c1997 DE vol. 96

Available at 1 libraries
22

Concurrent product design and environmentally conscious manufacturing : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas

sponsored by the Design Engineering Division, ASME, the Manufacturing Engineering Division, ASME ; edited by Samir B. Billatos, Hong C. Zhang

American Society of Mechanical Engineers c1997 DE vol. 94 , MED vol. 5

Available at 1 libraries
23

Active/passive vibration control and nonlinear dynamics of structures : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas

sponsored by the Design Engineering Division, ASME, the Applied Mechanics Division, ASME ; edited by W.W. Clark ... [et al.]

American Society of Mechanical Engineers c1997 DE vol. 95 , AMD vol. 223

Available at 2 libraries
24

Reliability, stress analysis, and failure prevention issues in fastening and joining, composite and smart structures, numerical and fea methods, and risk minimization : presented at the 1996 International Mechanical Engineering Congress and Exposition, November 17-22, 1996 Atlanta, Georgia

sponsored by the Design Engineering Division, ASME ; edited by Erol Sancaktar, Shahriar Jahanian

American Society of Mechanical Engineers c1996 DE v. 92

Available at 1 libraries
25

Nonlinear dynamics and controls : presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996 Atlanta, Georgia

sponsored by the Design Engineering Division, ASME, the Applied Mechanics Division, ASME, the Dynamic Systems and Controls Division, ASME ; edited by Anil K. Bajaj, N. Sri Namachchivya, Matthew, A. Franchek

American Society of Mechanical Engineers c1996 DE v. 91

Available at 2 libraries
26

Elasto-impact and friction in dynamic systems : presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996 Atlanta, Georgia

sponsored by the Design Engineering Division, ASME ; edited by George T. Flowers, Subhash C. Sinha, Aldo A. Ferri

American Society of Mechanical Engineers c1996 DE v. 90

Available at 1 libraries
27

Design for manufacturing and assembly : presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996 Atlanta, Georgia

sponsored by the Design Engineering Division, ASME ; edited by Samir B. Billatos, Nadia A. Basaly

American Society of Mechanical Engineers c1996 DE v. 89

Available at 2 libraries
28

Proceedings of the 7th International Power Transmission and Gearing Conference : presented at the 7th International Power Transmission and Gearing Conference, October 6-9, 1996, San Diego, California

sponsored by the Design Engineering Division, ASME ; edited by Albert Karvelis

American Society of Mechanical Engineers c1996 DE vol. 88

Available at 2 libraries
29

Elasto-impact and friction in dynamic systems : presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia

sponsored by the Design Engineering Division, ASME ; edited by George T. Flowers, Subhash C. Sinha, Aldo A Ferri

American Society of Mechanical Engineers c1996 DE vol. 90

Available at 2 libraries
30

Active control of vibration and noise : presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia

sponsored by the Design Engineering Division, ASME ...[et al.] ; edited by C.A.Tan ...[et al.]

American Society of Mechanical Engineers c1996 DE Vol.93

Available at 2 libraries
31

Concurrent product and process engineering : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

sponsored by the Manufacturing Engineering Division, ASME, the Design Engineering Division, ASME ; edited by A. Raj Thangaraj, Rajit Gadh, Samir Billatos

American Society of Mechanical Engineers c1995 DE vol. 85 , MED vol. 1

Available at 1 libraries
32

Reliability, stress analysis, and failure prevention issues in emerging technologies and materials : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California

sponsored by the Design Engineering Division, ASME ; edited by Erol Sancaktar

American Society of Mechanical Engineers c1995 DE vol. 87

Available at 2 libraries
33

Vibration control, analysis, and identification : presented at the ASME Design Engineering Technical Conference -- the 15th Biennial Conference on Mechanical Vibration and Noise, September 17-20, 1995, Boston, Massachusetts

sponsored by the Design Engineering Division, ASME ; compiled by H.H. Cudney ; edited by K.-W. Wang ... [et al.]

American Society of Mechanical Engineers c1995 DE v. 84-3 . Proceedings of the 1995 Design Engineering Technical Conferences ; v. 3, pt. C

Available at 1 libraries
34

Acoustics, vibrations, and rotating machines : presented at the ASME Design Engineering Technical Conference -- the 15th Biennial Conference on Mechanical Vibration and Noise, September 17-20, 1995, Boston, Massachusetts

sponsored by the Design Engineering Division, ASME ; compiled by H.H. Cudney ; edited by Raymond P. Daddazio ... [et al.]

American Society of Mechanical Engineers c1995 DE v. 84-2 . Proceedings of the 1995 Design Engineering Technical Conferences ; v. 3, pt. B

Available at 1 libraries
35

Vibration of nonlinear, random, and time-varying systems : presented at the ASME Design Engineering Technical Conference -- the 15th Biennial Conference on Mechanical Vibration and Noise, September 17-20, 1995, Boston, Massachusetts

sponsored by the Design Engineering Division, ASME ; compiled by H.H. Cudney ; edited by S.C. Sinha ... [et al.]

American Society of Mechanical Engineers c1995 DE v. 84-1 . Proceedings of the 1995 Design Engineering Technical Conferences ; v. 3, pt. A

Available at 1 libraries
36

Presented at the 1995 ASME Design Engineering Technical Conferences - the 11th Biennial Conference on Reliability, Stress Analysis, and Failure Prevention, the 9th International Conference on Design Theory and Methodology, the JSME Symposium on Design and Production, Mechanical Design Education and History, the Computer Integrated Concurrent Design Conference, September 17-20, 1995, Boston, Massachusetts

compiled by Daniel J. Inman ; sponsored by the Design Engineering Division, ASME ; edited by Osama M. Jadaan ... [et al.]

American Society of Mechanical Engineers c1995 DE v. 83 . Proceedings of the 1995 Design Engineering Technical Conferences ; v. 2

Available at 1 libraries
37

Advances in design automation --1995-- : presented at the 1995 ASME Design Engineering Technical Conferences - 21st Annual Design Automation Conference, September 17-20, 1995, Boston, Massachusetts

sponsored by the Design Engineering Division, ASME ; edited by Shapour Azarm ... [et al.]

American Society of Mechanical Engineers c1995 DE v. 82 . Proceedings of the 1995 Design Engineering Technical Conferences ; v. 1

Available at 1 libraries
38

Design for manufacturability 1995 : current engineering and design/manufacturing integration : presented at the 1995 National Design Engineering Show and Conference March 13-17, 1995, Chicago, Illinois

sponsored by the Design Engineering Division, ASME ; edited by J. Richard Behun

American Society of Mechanical Engineers c1995 DE v. 81

Available at 2 libraries
39

Nonlinear and stochastic dynamics : presented at 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994

sponsored by the Applied Mechanics Division and the Design Engineering Division, ASME ; edited by A.K. Bajaj ... [et al.]

American Society of Mechanical Engineers c1994 AMD vol. 192 , DE vol. 78

Available at 2 libraries
40

Reliability, stress analysis, and failure prevention aspects of composite and active materilas : presented at 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994

sponsored by the Design Engineering Division, ASME ; edited by E. Sancaktar, J.S. Lee

American Society of Mechanical Engineers c1994 DE vol. 79

Available at 1 libraries

American Society of Mechanical Engineers. Design Engineering Division

Search Results21-40 of 103

Search this author

Related Authors