Search Results 1-20 of 1435

  • Effect of Heating Order on Interference between Deformations by Curved Line Heating in Laser Forming  [in Japanese]

    Akiyama Tetsuya , Kitamura Takanori , Izutsu Ryosuke , Maeda Yuta

    … A combination of multiple curved heating lines is required to form a practical shape. … The relationship between heating conditions and deformation has been studied in detail in the field of welding, etc. … when the heating line is straight. …

    Journal of the Japan Institute of Metals and Materials 85(4), 138-146, 2021

    J-STAGE 

  • Application of Divertor Pumping to Long-Pulse Discharge for Particle Control in LHD

    MOTOJIMA Gen , MASUZAKI Suguru , MORISAKI Tomohiro , KOBAYASHI Masahiro , SAKAMOTO Ryuichi , TSUCHIBUSHI Yasuyuki , MURASE Takanori , TAKEIRI Yasuhiko , the LHD experiment group

    … Divertor pumping was applied to 40-second long pulse Electron Cyclotron Heating (ECH) discharges to assess the improvement in particle control provided by divertor pumping. … The results show that without divertor pumping, the electron density was not controlled by gas puffing using the feedback signal of line-averaged electron density. …

    Plasma and Fusion Research 16(0), 1202014-1202014, 2021

    J-STAGE 

  • Heat Transfer of Three-Dimensional Backward-Facing Step Flow : Local Heat Transfer Coefficients on the Bottom Wall and Upper Wall

    Shuai Zou , Takeshi Murayama , Shogo Motoda , Shumpei Hara , Kyoji Inaoka

    ダクト内流路の3次元後方向きステップモデルにおける流れと熱伝達のメカニズムは、特に比較的低いレイノルズ数領域において、未だ十分に解明されていない。本報では、ステップ下壁面と上壁面の局所熱伝達率分布を感温液晶法によって求め、熱伝達率の低下、増大とその発生原因を究明する。用いた感温液晶面の呈色(RGB値)と温度の関係づけにはMLP(多層パーセプトロン)法を用いた。校正後の予備実験は、熱流束一定の条件で …

    同志社大学ハリス理化学研究報告 = The Harris science review of Doshisha University 61(2), 125-131, 2020-07

    IR  DOI 

  • Development of Manufacturing Support System for Ship Curved Shell Plate Using Laser Scanner  [in Japanese]

    満行 泰河 , 稗方 和夫 , 笠原 達也

    日本船舶海洋工学会講演会論文集 Conference proceedings, the Japan Society of Naval Architects and Ocean Engineers (30), 713-720, 2020-05

  • 3D Numerical Study of Crystal Rotation Effect on Three-Phase Line in Floating Zone Silicon  [in Japanese]

    Han Xue-Feng , Liu Xin , Nakano Satoshi , Harada Hirofumi , Miyamura Yoshiji , Kakimoto Koichi

    … To study the effect of high-frequency (HF) electromagnetic (EM) heating on the solid-liquid interface shape, HF-EM and heat transfer calculations were conducted in three dimensions. … However, a more homogeneous three-phase line could be obtained with a high rotational crystal speed. …

    九州大学応用力学研究所所報 (157), 7-11, 2020-03

    IR  DOI 

  • Production Scheduling Method to Reduce Fuel Costs of Hot Rolling Processes  [in Japanese]

    DOAN Takeru , NAGAHARA Satoshi , CHIDA Takafumi , KATSUBE Junichi , ADACHI Tooru , MITA Satoru

    … <p>In order to minimize the fuel cost for heating steel ingots in hot rolling process, it is important to plan (1) batch formation to increase filling rate in furnaces and (2) work schedule to reduce stagnation of ingots in furnaces. … The developed method has been applied to actual hot rolling line and reduced the fuel cost by 8%.</p> …

    The Proceedings of Mechanical Engineering Congress, Japan 2020(0), S14202, 2020

    J-STAGE 

  • Proposal of evaluation method for fiber impregnation condition of discontinuous fiber CFRP based on the measurement of thermal diffusivity distribution in the thickness direction  [in Japanese]

    MIYACHI Kohei , MURANAKA Yasuyuki , NONAKA Shinichi , NAGANO Hosei

    … In this study, we propose a new detection method based on the thermal diffusivity distribution in the thickness direction using line heating as a method for detecting the non-impregnated part at the stage of the intermediate substrate. …

    The Proceedings of Mechanical Engineering Congress, Japan 2020(0), J03316, 2020

    J-STAGE 

  • Study on Chemical Reaction during Pyrolysis of Cellulose, Lignin and Xylan  [in Japanese]

    Yoshinaga Akihiro , Morishige Naoto , Loong Glen Khew Mun , Tanoue Ken-ichiro

    … For cellulose pyrolysis, first pyrolysis rate constant K1 was expressed by a single correlation line even if the heating rate was changed while the variation of second pyrolysis rate constant K2 became slightly large. …

    The Proceedings of the Thermal Engineering Conference 2020(0), 0119, 2020

    J-STAGE 

  • Evaluation of analytical method of complex organic matter by pyrolysis gas chromatography mass spectrometry for future application to extraterrestrial materials  [in Japanese]

    Mogi Yuto , Kebukawa Yoko , Kobayashi Kensei

    <p>熱分解ガスクロマトグラフィー質量分析法(GC/MS)は、熱分解温度を変える事で有機物構造の詳細な特徴を知る事が出来る。複雑有機物の構造や熱的特徴を調べる為、同じサンプルを繰り返し使用して一連の熱分解温度にてGC/MS分析を行う手法"Continuous"と、熱分解温度ごとにサンプルを新たに用意する手法"Replaced"の2種の段階加熱方法の検討及び評価を行った。分析中の試料の変 …

    Abstracts of Annual Meeting of the Geochemical Society of Japan 67(0), 151, 2020

    J-STAGE 

  • Study on Automation of Heat Straightening Based on Complex Method  [in Japanese]

    KATO Takuya , ASHIDA Ryo , IKUSHIMA Kazuki , 夏目 糧平 , 小田 和生 , 山﨑 洋輔 , 中谷 光良 , SHIBAHARA Masakazu

    船体を構成する防撓構造のブロックを溶接により組み立てをすると熱変形が生じ、設計寸法とは異なる寸法となってしまう.これをガスバーナーにより矯正する必要があるが、このひずみ取り作業は熟練技能者に頼る部分が多いため寸法管理や技術伝承の点において問題となっている.本研究では、防撓構造のひずみを取り除くことができる線状加熱の加熱法案をComplex MethodとFEMを統合したシステム構築を行った.

    Preprints of the National Meeting of JWS 2020f(0), 284-285, 2020

    J-STAGE 

  • Study on System for Automatic Planning of Line Heating by Using AI Line Heating System  [in Japanese]

    ASHIDA Ryo , IKUSHIMA Kazuki , NOTSU Akira , TANGO Yoshihiko , KIJI Noboru , KOMADA Shuji , SHIBAHARA Masakazu

    線状加熱(ぎょう鉄)は,船体外板を形成するために古くから用いられ、加熱により発生する塑性変形を利用し曲げ加工を行う技術である.しかしながら、線状加熱は作業者の経験と勘に頼る部分が多いため、寸法管理や技術伝承の点において問題となっている。そこで本研究では,効率的に任意形状を作成するための加熱方案を得ることを目的に,熟練技能者が用いる加熱速度の使い分けを考慮したAI線状加熱システムの構築を試みた。

    Preprints of the National Meeting of JWS 2020f(0), 198-199, 2020

    J-STAGE 

  • PERFORMANCE EVALUATION OF GROUND SOURCE HEAT PUMP SYSTEM AND CONSIDERATIONS FOR THE INSTALLATION IN KAHOKU PLAIN, ISHIKAWA PREFECTURE  [in Japanese]

    TOMIGASHI Akira , UCHIDA Youhei , SHIMADA Kazuhiro , SHRESTHA Gaurav , ISHIHARA Takeshi , SANO Seiga

    <p> 河北平野の中心部に位置する石川県工業試験において,降雪期と非降雪期の季節別に熱応答試験を実施した.降雪期には適切な熱応答試験データが得られなかった.これは,積雪時に稼働する融雪システム用の地下水揚水井の影響によるものと考えられる.また,GSHPシステムの実証実験結果より,冷房・暖房ともに良好な運転実績が確認できた.実証実験中の地下温度の簡易再現計算を行ったところ,非降雪期に実施 …

    Journal of Japan Society of Civil Engineers, Ser. G (Environmental Research) 76(5), I_277-I_287, 2020

    J-STAGE 

  • Regression Approach for Acquiring a Quantitative Guidance toward Updating the Deuterium-Deuterium Fusion Neutron Emission Rate in the Large Helical Device

    OGAWA Kunihiro , YOKOYAMA Masayuki , ISOBE Mitsutaka

    … <p>A regression approach has been adopted to acquire a quantitative guidance for updating the total neutron emission rate (<i>S</i><sub>n</sub>) in the Large Helical Device (LHD) with employing the externally controllable parameters such as heating power and plasma density. …

    Plasma and Fusion Research 15(0), 1202087-1202087, 2020

    J-STAGE 

  • Problem on Operation of A Continuous Digester with Low Quality Chips and Dealing with It By Upgrade of The Existing Cooking Equipment  [in Japanese]

    Ju Yan

    <p>近年,バイオマス発電用とパルプ製造用の木材チップ量が年々増えるにつれて,連続蒸解釜で低品質チップの配合が多くなっている。そのためにチップ脱気と薬品浸透の効果低下,チップシュートでの液レベルの変動,釜内チップコラム下降の阻害,釜ボトムスクレーパー負荷とブロー差圧の低下,ハンキングなどの操業問題が多くなり,釜生産に影響を与えるようになっている。</p><p>低 …

    JAPAN TAPPI JOURNAL 74(8), 777-781, 2020

    J-STAGE 

  • CONSIDERATIONS ON HOUSES AND LIVING ENVIRONMENT FOR ELDERLY PEOPLE IN LAN TIAN PREFECTURE OF XI'AN・CHINA  [in Japanese]

    LI Huijuan , YAMAGISHI Teruki , HIROTA Naoyuki , DUAN Lianru , FUNO Shuji

    … As for the living problems, the lack of heating, toilets and bathrooms and the aging of the facilities are major. … Such as lack of heating, toilets, and bathrooms etc. … There are many inconvenient in the house such as moving line for the elderly. … There are also problems such as the inconvenience of heating and cooking in a traditional stove, steps between indoors and outdoors, or rooms, and stairs. …

    Journal of Architecture and Planning (Transactions of AIJ) 85(776), 2075-2083, 2020

    J-STAGE 

  • Transient Electron Thermal Transport Analysis Accounting Oblique Electron Cyclotron Resonance Heating Injection to Magnetic Field Line

    KOBAYASHI Tatsuya , YANAI Ryoma , TSUJIMURA Toru Ii , TOKUZAWA Tokihiko , YOSHIMURA Yasuo , IDA Katsumi , the LHD Experiment Group

    … <p>In response to recent upgrade of the raytracing code for the electron cyclotron resonance heating (ECH) in LHD, transient electron thermal transport is reanalyzed. … The upgraded code <i>LHDGauss-U </i>takes into account the oblique injection of the ECH ray to magnetic field line. …

    Plasma and Fusion Research 15(0), 1402072-1402072, 2020

    J-STAGE 

  • Gas Permeability Evaluation of Granulated Slag Particles Packed Bed during Softening and Melting Stage with Fanning's Equation

    Ohno Ko-ichiro , Kitamura Yoshiki , Sukenaga Sohei , Natsui Sungo , Maeda Takayuki , Kunitomo Kazuya

    … In order to precisely understand cohesive behaviour, a softening and melting simulator under rapid heating and quenching conditions was applied for clarify a determinant factor of gas permeability behaviour. … The CT observation also gave triple line length among molten slag, graphite, and gas. … Combination the triple line length and molten slag surface tension could use for evaluation of static force balance when maximum pressure drop obtained.</p> …

    ISIJ International 60(7), 1512-1519, 2020

    J-STAGE 

  • Study on System for Purpose of Line Heating Plan by Using AI Line Heating  [in Japanese]

    Ashida Ryo , MAEKAWA Manami , IKUSHIMA Kazuki , NOTSU Akira , SHIBAHARA Masakazu , TANGO Yoshihiko , KIJI Noboru , KOMADA Syuzi

    線状加熱(ぎょう鉄)は,船体の曲がり外板を形成するために用いられ、鋼板を加熱する際に発生する塑性変形を利用し曲げ加工を行う技術である.しかしながら、線状加熱は作業者の経験と勘に頼る部分が多いため、寸法管理や技術伝承の点において問題となっている。そこで本研究では,任意形状を得るための加熱方案を得ることを目的に,深層強化学習と数値シミュレーションを統合したAI線状加熱システムの構築を試みた。

    Preprints of the National Meeting of JWS 2020s(0), 198-199, 2020

    J-STAGE 

  • DEVELOPMENT OF AN EQUATION CALCULATING YOUNG'S MODULUS REMAINING RATIO WITH TEMPERATURE AND MOISTURE CONTENT WITHIN WOODEN MEMBERS EXPOSED TO FIRE HEATING  [in Japanese]

    SUZUKI Tatsuro , HASEMI Yuji , KAMIKAWA Daisuke , YASUI Noboru , KAKU Chihiro , WATANABE Shuta

    … <p> Young's Modulus of wood at elevated temperatures is formulated as functions of temperature and moisture content for the assessment of mechanical performance of wooden members exposed to fire heating. …

    Journal of Structural and Construction Engineering (Transactions of AIJ) 85(770), 651-661, 2020

    J-STAGE 

  • Characteristics, Physical Mechanisms, and Prediction of Pre-summer Rainfall over South China: Research Progress during 2008–2019

    Luo Yali , Xia Rudi , Chan Johnny C. L.

    … Surface sensible heating and mechanical forcing from the Tibetan Plateau can contribute to the formation and intensification of such anomalies. … The northern rain belt is closely linked to dynamic lifting by a subtropical low pressure and its associated front/shear line, whereas westward extension of the western North Pacific high and intensification of the southwesterly monsoonal flows play important roles in providing high-equivalent potential temperature air to the west- and east-inland regions, respectively. …

    Journal of the Meteorological Society of Japan. Ser. II 98(1), 19-42, 2020

    J-STAGE 

Page Top