ゾル・ゲルコーティング‐Ｚｒ酸化物に覆われたアルミニウムのアノード酸化

DOI Web Site 被引用文献7件 参考文献20件

書誌事項

タイトル別名
  • Anodizing of Aluminum Coated with Zirconium Oxide by a Sol-Gel Coating.
  • ゾル ゲル コーティング Zr サンカブツ ニ オオワレタ アルミニウム ノ アノード サンカ

この論文をさがす

抄録

Aluminum specimens were covered with zirconium oxide film by a sol-gel coating and galvanostatically anodized in a neutral borate solution. The time variation in anode potential during anodizing was monitored, and the structure and dielectric properties of the anodic oxide film were studied by TEM, EDX, RBS, and impedance measurement.<br>We found that the anode potential increases with time, and that the slope of the potential-time curve increases with increasing the numbers of sol-gel dip coatings. During anodizing, an anodic oxide film, which consisted of an inner Al2O3 layer and an outer Al-Zr composite oxide layer, formed at the interface between Zr-oxide and the substrate. The thickness of the inner layer increased with anodizing time, and the thickness of the outer layer peaked before decreasing with time. The capacitance of the specimen after sol-gel coating and anodizing was 20% higher than that without sol-gel coating. The dielectric property of anodic oxide films was correlated with film structure.<br>The mechanism of anodic oxide films growth on the spceimen covered with Zr-oxide is discussed in terms of the porosity distribution in the Zr-oxide layer and the outward transport of Zr4+ ions across the composite oxide layer during anodizing.

収録刊行物

  • 表面技術

    表面技術 50 (4), 359-366, 1999

    一般社団法人 表面技術協会

被引用文献 (7)*注記

もっと見る

参考文献 (20)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ