Dissolution and Deposition of Impurities in Mg Electrolysis

  • Takenaka Toshihide
    Department of Production Systems Engineering, Toyohashi University of Technology
  • Fujita Tomoyuki
    Department of Production Systems Engineering, Toyohashi University of Technology
  • Isazawa Satoshi
    Department of Production Systems Engineering, Toyohashi University of Technology
  • Kawakami Masahiro
    Department of Production Systems Engineering, Toyohashi University of Technology

この論文をさがす

抄録

Electrochemical behaviors of Fe, Cr and Ni have been investigated in molten salt systems as a basic study on the electrorefining of Mg metal; The electrochemical behaviors of FeCl2, NiCl2 and CrCl3 were examined by voltammetry, and the electrochemical dissolutions of these metals were also studied. A MgCl2–CaCl2–NaCl or MgCl2–NaCl–KCl melt was used as electrolytic bath. The electrode reactions of these elements were discussed on these results, and it was concluded that these elements could be eliminated from Mg metal easily by electrorefining process in molten salts. Magnesium metal was obtained electrochemically not only above the melting point of Mg metal but also below the melting point. However, Mg electrodeposit with good morphology could not be obtained under any electrolytic condition below the melting point of Mg metal.

収録刊行物

被引用文献 (9)*注記

もっと見る

参考文献 (7)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ