アモルファス・ナノ結晶制御と高機能材料  放電プラズマ焼結法によるFe‐Co‐Ga‐P‐C‐Bガラス合金粉末のパルク化とその磁気特性

書誌事項

タイトル別名
  • Consolidation of Fe-Co-Ga-P-C-B Glassy Powders by Spark-Plasma-Sintering and Their Magnetic Properties.
  • ホウデン プラズマ ショウケツホウ ニ ヨル Fe Co Ga P C Bガラス ゴウキンフンマツ ノ バルクカ ト ソノ ジキ トクセイ

この論文をさがす

抄録

Fe65Co10Ga5P12C4B4 glassy alloy powders were produced by high pressure Ar gas atomization of Fe65Co10Ga5P12C4B4 alloy ingot prepared by induction melting. The glass transition temperature (Tg), supercooled liquid region (ΔTx(=Tx-Tg)) of the glassy alloy powders are 730K and 50K. The glassy alloy powders have ferromagnetism with a Curie temperature (Tc) of 640 K and exhibits saturation magnetization (Is) of 1.18 T. No appreciable difference in the thermal stability and magnetic properties is seen between the glassy alloy powders and the melt-spun ribbon. By spark-plasma-sintering (SPS) these glassy alloy powders under the pressure of 80 MPa and at the temperature of 723 K below Tg, a bulk glassy Fe65Co10Ga5P12C4B4 alloy with a size of 20 mm in diameter and 5 mm in thickness was synthesized. Its relative density was about 96%. There was also no appreciable difference in the thermal stability between the bulk glassy alloy and the glassy alloy powders. This bulk glassy alloy exhibited saturation magnetization (Is) of 1.19 T and coercivity (Hc) of 115 A/m.

収録刊行物

被引用文献 (5)*注記

もっと見る

参考文献 (25)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ