書誌事項
- タイトル別名
-
- Influence of Alloy Composition, Priming, and Thermocycling on Bond Strength to Silver-palladium-Copper-Gold Alloys.
この論文をさがす
抄録
The influence of alloy composition, priming, and thermocycling on bond strength to silver-palladium-copper-gold alloy was evaluated in vitro by means of shear testing. Disk specimens with two different diameters were cast from three commercially available (S12, S20 and Castwell M. C. 12) and four experimental silver-palladium-copper-gold alloys (KB1, KB2, KB3 and KB4), each of the latter containing copper more than 20%. Specimens were either unprimed or primed with a metal conditioner (V-Primer), bonded with an adhesive resin (Super-Bond Opaque), then shear testing was performed. The results showed that the low-copper S12 and S20 alloys showed lower post-thermocycling bond strength than the Castwell alloy regardless application of the conditioning agent. Post-thermocycling bond strengths of the primed KB1, KB2, KB3 and KB4 alloys were the same magnitude as that of the Castwell alloy. For all groups except for one (S12, without thermocycling), bond strength was elevated by use of the metal surface conditioner. Application of thermal stress drastically reduced bond strength of unprimed groups, whereas bond strength of the two primed groups (KB1 and KB2) was unaffected by thermocycling.
収録刊行物
-
- 接着歯学
-
接着歯学 17 (1), 23-28, 1999
日本接着歯学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679325173888
-
- NII論文ID
- 130004047877
- 10010622389
-
- NII書誌ID
- AN10044236
-
- ISSN
- 21859566
- 09131655
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可