書誌事項
- タイトル別名
-
- Newly Designed Jaw Tracking System with Six-degree-of-freedom Based on a Low-frequency Magnetic Transducing Technology
この論文をさがす
抄録
Purpose: The purpose of this study was to develop a new jaw tracking system with six-degree-offreedom, which had a simpler structure and eary operation.<BR>Materials and Methods: 3 SPACE®FASTRAK®(Polhemus Inc.) was used to construct a new jaw tracking system. This system consists of a transmitter, two sensors, a system electronics unit, and a personal computer. Two sensors are fixed on the labial surface of upper and lower incisors by using a resin splint. When the transmitter and the sensor were positioned 300 mm apart, total measurement errors were revealed to be minimum and these values for distance and for angle were less than 100μm and 0.2 degree, respectively.<BR>Discussion: Comparing the system with other jaw tracking systems on the market, the advantages of the system are: 1) since the sensor is small and lightweight, this apparatus causes minimum interference to the subject during measurement; 2) the mandibular movement can be reproduced as a movie on the CRT just after completing the measurement; 3) the kinematic axis can be automatically searched by using an original software.<BR>Conclusions: A newly designed measurement system with six-degree-of-freedom was developed based on a low-frequency magnetic transducing technology. Both the hardware and software of the system showed good performance and high accuracy.
収録刊行物
-
- 日本補綴歯科学会雑誌
-
日本補綴歯科学会雑誌 47 (5), 814-823, 2003
社団法人 日本補綴歯科学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679389468288
-
- NII論文ID
- 10011876972
- 10011876839
-
- NII書誌ID
- AN00197911
-
- ISSN
- 1883177X
- 03895386
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
- KAKEN
-
- 抄録ライセンスフラグ
- 使用不可