Effect of Heat Treatment on Microstructures and Tensile Properties of Ultrafine Grained C-Mn Steel Containing 0.34mass% V

この論文にアクセスする

この論文をさがす

著者

    • PARK Kyung-Tae
    • Division of Advanced Materials Science and Engineering, Hanbat National University
    • HAN Soo Yeon
    • Department of Metallurgy and Materials Science, Hanyang University
    • SHIN Dong Hyuk
    • Department of Metallurgy and Materials Science, Hanyang University
    • LEE Kyung Jong
    • Division of Materials Science and Engineering, Hanyang University
    • LEE Kyung Sub
    • Division of Materials Science and Engineering, Hanyang University

抄録

An ultrafine grained (UFG) C-Mn steel containing a relatively large amount of vanadium was fabricated by equal channel angular pressing (ECAP) and its microstructures and tensile properties were examined. This investigation was aimed at demonstrating the effect of precipitation stage of vanadium precipitates in the course of the material processing on the tensile properties of the ultrafine grained C-Mn steel, especially strength and strain hardening capability. For this purpose, the two different heat treatments were carried out on the present steel: (a) conventional normalization for vanadium precipitation before ECAP, and (b) isothermal transformation for vanadium precipitation during ECAP and subsequent annealing. The results showed that the second heat treatment was more effective on improving the thermal stability and the overall tensile properties of the steel by better uniform distribution of nano-sized vanadium precipitates which yielded an extensive interaction with lattice dislocations inside ultrafine ferrite grains. In addition, in this report, the feasibility enhancing the strain hardening capability of the UFG C-Mn steel was explored by comparing the microstructure and stress-strain curve of the steel prepared by the second heat treatment with those of the UFG C-Mn steel without vanadium.

収録刊行物

  • ISIJ international

    ISIJ international 44(6), 1057-1062, 2004-06-15

    The Iron and Steel Institute of Japan

参考文献:  19件中 1-19件 を表示

  • <no title>

    Proc. of the 1st Int. Conf. on Advanced Structural Steels (ICASS 2002), 2002, 2002

    被引用文献1件

  • <no title>

    ISIJ Int. 42(12), 1325-1596, 2002

    被引用文献1件

  • <no title>

    TSUJI N.

    Scr. Mater. 40, 795, 1999

    被引用文献5件

  • <no title>

    SHIN D. H.

    Acta Mater. 48, 2247, 2000

    被引用文献7件

  • <no title>

    PARK K.-T.

    Mater. Sci. Eng. A 293, 165, 2000

    被引用文献2件

  • <no title>

    TSUJI N.

    Scr. Mater. 46, 305, 2002

    被引用文献4件

  • <no title>

    FUKUDA Y.

    Acta Mater. 50, 1359, 2002

    被引用文献2件

  • <no title>

    VALIEV R. Z.

    Acta Metall. Mater 42, 2467, 1994

    被引用文献7件

  • <no title>

    PARK K.-T.

    Metall. Mater. Trans. A 32, 2373, 2001

    被引用文献1件

  • <no title>

    SHIN D. H.

    ISIJ Int. 42, 1490-1496, 2002

    被引用文献2件

  • <no title>

    FURUKAWA M.

    Mater. Sci. Eng. A 257, 328, 1998

    被引用文献3件

  • <no title>

    PORTER D. A.

    Phase Transformation in Metals and Alloys 333, 1981

    被引用文献1件

  • <no title>

    DIETER G. E.

    Mechanical Metallurgy 210, 1976

    被引用文献1件

  • <no title>

    WANG Y.

    Nature 419, 912, 2002

    被引用文献4件

  • <no title>

    PARK K.-T.

    Metall. Mater. Trans. A 33, 705, 2002

    被引用文献2件

  • <no title>

    APPS P. J.

    Acta Mater. 51, 2811-2822, 2003

    被引用文献7件

  • Enhanced tensile ductility and toughness in nanostructured Cu

    WANG Y.

    Applied Physics Letters 80(13), 2395-2397, 2002

    機関リポジトリ DOI 被引用文献1件

  • <no title>

    CONRAD H.

    Mater. Sci. Eng., A 341, 216, 2003

    被引用文献1件

  • <no title>

    CONRAD H.

    Acta Mater. 50, 5067, 2002

    被引用文献1件

被引用文献:  1件中 1-1件 を表示

  • 材料の塑性(I)鉄鋼

    上路 林太郎 , 品川 一成

    塑性と加工 = JOURNAL OF THE JAPAN SOCIETY FOR TECHNOLOGY OF PLASTICITY 46(535), 687-689, 2005-08-25

    参考文献89件

各種コード

ページトップへ