高速電子写真技術のためのコロナ帯電方式の改善 Improvement of Corona Charging System for High Speed Electrophotography

この論文にアクセスする

この論文をさがす

著者

    • 中村 聡 NAKAMURA Satoshi
    • 東京理科大学 理工学研究科電気工学専攻 Faculty of Science and Technology, Tokyo University of Science
    • 崔 光石 CHOI Kwang-seok
    • 東京理科大学 理工学研究科電気工学専攻 Faculty of Science and Technology, Tokyo University of Science
    • 村田 雄司 MURATA Yuji
    • 東京理科大学 理工学研究科電気工学専攻 Faculty of Science and Technology, Tokyo University of Science

抄録

For the purpose of improving the speed of the charging process of electrophotography, a new electrode system was investigated. The system consists of a blade electrode and a metal drum coated with a polymer film. The sharp edge of the blade electrode was retained perpendicularly for the drum surface by opening 2 to 6 mm gap. In order to prevent spark discharge, an 8 MΩ resistor was inserted between the blade and a dc high voltage source, and a glow-like discharge was observed in the space between the blade edge and the surface of the polymer film. As the discharge current obtained by the present electrode system was much higher than that obtained by a single wire corona charger, the charging speed attained by the present system was 7.2 times as fast as the case of the corona charging system.

収録刊行物

  • 電気学会論文誌. A, 基礎・材料・共通部門誌 = The transactions of the Institute of Electrical Engineers of Japan. A, A publication of Fundamentals and Materials Society

    電気学会論文誌. A, 基礎・材料・共通部門誌 = The transactions of the Institute of Electrical Engineers of Japan. A, A publication of Fundamentals and Materials Society 124(8), 754-755, 2004-08-01

    一般社団法人 電気学会

参考文献:  2件中 1-2件 を表示

各種コード

  • NII論文ID(NAID)
    10013325861
  • NII書誌ID(NCID)
    AN10136312
  • 本文言語コード
    JPN
  • 資料種別
    SHO
  • ISSN
    03854205
  • データ提供元
    CJP書誌  J-STAGE 
ページトップへ