Development of New Conductors of the Cable-in-Conduit Type for HTS Coils with High Performances

DOI Web Site Web Site 8 References

Bibliographic Information

Other Title
  • 高温超伝導コイルの高性能化を目指す新しいケーブル・イン・コンジット型導体の開発
  • コウオン チョウデンドウ コイル ノ コウセイノウカ オ メザス アタラシイ ケーブル イン コンジットガタ ドウタイ ノ カイハツ

Search this article

Abstract

A new type cable-in-conduit conductor composed of HTS tapes was proposed as a winding for high performance HTS coils with high current capacities and low ac losses. In the fabrication of the conductor, the twist of stacked tapes around their axes was made before inserting them inside conduits. The twist angle should be changed continuously along the axis to reduce face-on orientated magnetic fields applied to the tape in the winding conductor during coil operation. In order to confirm the high current capacity of this type conductor, two single-layered solenoidal coils wound with sample conductors composed of 5 stacked Bi-2223 tapes with bias angles of 20 and 0 degrees were fabricated and tested in liquid nitrogen. A copper magnet system was used in this experiment to generate the spread magnetic field with a spread angle of 20 degrees from the coil axis to the radial direction, which simulates the profile of magnetic fields near the edge windings of practical coils. A large improvement on critical-currents degradation affected by spread magnetic fields was successfully observed for the test coil wound with the 20-degree bias conductor.

Journal

References(8)*help

See more

Related Projects

See more

Keywords

Details 詳細情報について

Report a problem

Back to top