Effect of Shear Deformation on Microstructural Evolution of Ni-30Fe Alloy during Hot Deformation

DOI Web Site Web Site 被引用文献6件 参考文献29件
  • Cho Jae-Young
    Steel Research Center, National Institute for Materials Science School of Materials Science and Engineering, Seoul National University Shinrim-dong
  • Inoue Tadanobu
    Steel Research Center, National Institute for Materials Science
  • Yin Fuxing
    Steel Research Center, National Institute for Materials Science
  • Nagai Kotobu
    Steel Research Center, National Institute for Materials Science

この論文をさがす

抄録

Electron backscattered diffraction analysis has been used to investigate the effect of shear deformation on the microstructural evolution of a Ni-30Fe alloy during hot deformation. The alloy was compressed by 50% or 75% in thickness at a strain rate of 1/s in a single pass at 1023 K using a hot compression simulator. An explicit finite element analysis was carried out to evaluate the inhomogeneous strain distribution introduced in the specimens by hot compression simulator. As the equivalent strain increased, the fraction of high angle grain boundaries with misorientaions between 15° and 30° increased almost in the similar way regardless of the presence of shear strain. The fraction of high angle grain boundaries having misorientations in excess of 30° increased mainly at the expense of low angle grain boundaries with misorientations smaller than 15°. Such the expense occurred at much higher rate with shear strain than without shear strain. The compressive direction changed continuously in the areas with shear strain component during deformation, which was thought to accelerate the subdivision of austenite grain interiors with increased misorientations between subdivided local areas.

収録刊行物

  • MATERIALS TRANSACTIONS

    MATERIALS TRANSACTIONS 45 (10), 2966-2973, 2004

    公益社団法人 日本金属学会

被引用文献 (6)*注記

もっと見る

参考文献 (29)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ