HAZ Softening and Creep Rupture Strength of High Cr Ferritic Steel Weldments.

DOI Web Site 被引用文献2件 参考文献13件

この論文をさがす

抄録

The creep rupture strengths of welded joints of Modified 9Cr-1Mo steel and 12Cr steel tend to decrease as compared with those of base metals. Therefore, the softening behavior at the heat affected zone (HAZ) was examined by means of mainly welding thermal cycle simulation, and the improvement of the creep rupture strength of GTAW joint was investigated from the standpoint of precipitation strengthening and/or solid solution strengthening. Consequently, the maximum HAZ softening was found at the peak temperature around 900°C, which was closely associated with the lack of fine Nb and V carbonitrides coherent with the matirix in addition to the fine grained microstructure formed by recovery and polygonalization of the tempered martensite. When conducting creep rupture test for their welded joints, the fracture location shifted from the base metal or the weld metal into the softened HAZ with increasing the Larson Miller parameter.<br>As far as the improvement of the creep rupture strength of GTAW joints is concerned, the control of morphology of Nb and V carbonitrides in the base metal prior to welding by using the thermo-mechanical control process (TMCP) was not effective. On the contrary, the creep rupture properties tended to be improved by increasing W and Cu contents similar to the case of base metal.<br>In conclusion, since the effect of precipitation strengthening is reduced at softened HAZ, the decrease in the creep rupture strength of weldment to some extent must be taken into account, and it is of importance to improve the strength of weldment by increasing that of base metal resulting from mainly solid solution strengthening.

収録刊行物

被引用文献 (2)*注記

もっと見る

参考文献 (13)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ