書誌事項
- タイトル別名
-
- Reducing the Required Power for the Screw Type Threshing Mechanism. (Part 1). The Development and the Test of the Load Detectors at the Threshing Cylinder.
- スクリュケイ ダッコク キコウ ノ ダッコク サヨウ ニ ツイテ ダイ1ポウ ダッコクブ フカ ケイソク ソウチ ノ カイハツ
- the Development and the Test of the Load Detectors at the Threshing Cylinder
- 脱穀部負荷計測装置の開発
この論文をさがす
抄録
A combine harvester which has an axial flow type thresher with a screw requires more power than a tangential flow type one because the crops are managed for longer second in the threshing part. A tendency to equip a higher powered engine with this type of combine harvesters has been seen lately. However on the other hand it is necessary to reduce the required power by means of reexamination in the specification of the threshing cylinder, while maintaining the threshing performance. The object of this study is to find out the specification where the required power will be less consumed. The first part of this study describes to develop the detector in order to measure the forces on the some parts of the thresher, to inspect its function and to understand the distinctive features of the loads in the threshing parts of the combine harvester.
収録刊行物
-
- 農業機械学会誌
-
農業機械学会誌 61 (5), 117-124, 1999
農業食料工学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204312101376
-
- NII論文ID
- 10019113497
-
- NII書誌ID
- AN00200470
-
- ISSN
- 18846025
- 02852543
-
- NDL書誌ID
- 4846120
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可