Effect of Iron Content on Hot Tearing of High-Strength Al-Mg-Si Alloy

DOI Web Site Web Site 被引用文献4件 参考文献28件
  • Nagaumi Hiromi
    Nikkei Research & Development Center (NRDC), Nippon Light Metal Company Ltd.
  • Suzuki Satoru
    Nikkei Research & Development Center (NRDC), Nippon Light Metal Company Ltd.
  • Okane Toshimitsu
    Digital Manufacturing Research Center, National Institute of Advanced Industrial Science and Technology (AIST)
  • Umeda Takateru
    Department of Metallurgical Engineering, Faculty of Engineering, Chulalongkorn University

この論文をさがす

抄録

The effect of iron content on hot tearing of the high-strength Al-Mg-Si alloy was systematically investigated. The alloy with higher content of iron resulted in the severe occurrence of hot tearing during direct chill (DC) casting. Mechanical properties of this alloy in which iron content was changed were investigated during solidification using an electromagnetic induction heating tensile machine. Tensile strength and elongation were discussed in relation with solidification progress of which sequence of crystallization, crystallization temperature of formed phases and their crystallized amount were calculated by a thermodynamic calculation software Thermo-Calc. In order to confirm the calculation results of solidification path, a quenching test also was carried out. Furthermore, by comparing the fracture surfaces of the tensile testing sample and DC billet, the temperature range of crack initiation of the alloy was examined. Comparing the temperature range of crack initiation with the crystallization phase and its crystallization order, iron content influenced hot tearing significantly owing to the crystallization behavior of α(AlFeMn) in high-strength Al-Mg-Si alloy.

収録刊行物

  • MATERIALS TRANSACTIONS

    MATERIALS TRANSACTIONS 47 (11), 2821-2827, 2006

    公益社団法人 日本金属学会

被引用文献 (4)*注記

もっと見る

参考文献 (28)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ