Steam Reforming of Dimethyl Ether over Cu/ZnO/ZrO<sub>2</sub> and γ-Al<sub>2</sub>O<sub>3</sub> Mixed Catalyst Prepared by Extrusion

DOI Web Site Web Site 41 References

Bibliographic Information

Other Title
  • 押出成形法により調製したCu/ZnO/ZrO<sub>2</sub>とγ-Al<sub>2</sub>O<sub>3</sub>混合触媒上でのジメチルエーテルの水蒸気改質反応
  • Steam reforming of dimethyl ether over Cu/ZnO/ZrO2 and γ-Al2O3 mixed catalyst prepared by extrusion
  • Steam reforming of dimethyl ether over Cu ZnO ZrO2 and g Al2O3 mixed catalyst prepared by extrusion

Search this article

Abstract

Steam reforming of dimethyl ether, DME, over Cu/ZnO/ZrO2 and γ-Al2O3 mixed catalysts prepared by the extrusion technique was investigated. The catalysts were characterized by BET, pore-size distribution measurements, N2O chemisorption, powder X-ray diffraction, and SEM-EDX analysis. The effect of reaction temperature on catalyst life time was investigated. Steam reforming of DME over the extruded catalyst proceeded above 623 K. The major reaction products were H2 and CO2 with relatively small amounts of CO and CH4. DME steam reforming was not restricted by the equilibrium limitation of DME hydration to CH3OH, suggesting that CH3OH produced was subsequently reformed into H2 and CO2 over the catalyst. The catalyst suffered from thermal deactivation at higher temperatures; mainly caused by a reduction in Cu dispersion in the Cu/ZnO/ZrO2 catalyst. Incorporation of ZrO2 into Cu/ZnO may stabilize Cu dispersion and increase the stability of the extruded catalyst for long-term operation.

Journal

References(41)*help

See more

Keywords

Details 詳細情報について

Report a problem

Back to top