書誌事項
- タイトル別名
-
- Effect of Graphite Diameter Added on the Tensile Strength of Fe-Cu-C Sintered Material
- Fe Cu Cケイ ショウケツ ザイリョウ ノ ヒッパリ ツヨサ ニ オヨボス テンカ コクエン リュウケイ ノ エイキョウ
この論文をさがす
抄録
It is well known that the pore morphology has a direct effect on the strength of sintered material. On the other hand, the strength of sintered material is influenced by the microstructure. In this study, the effects of graphite powder diameter on the pore morphology and the microstructure of Fe-2%Cu-C sintered materials, where the graphite powder amount added was 0.6, 0.8 and 1.0 mass%, were examined. The main results are as follows; (1) With decrease in the graphite powder diameter from 17 to 1.5 μm, the pore size after sintering was reduced. (2) The tensile strength of sintered materials indicated a peak at 4.2 μm of the graphite particle diameter. (3) The tensile strength was correlated to the area fraction of pearlite.
収録刊行物
-
- 粉体および粉末冶金
-
粉体および粉末冶金 56 (8), 495-501, 2009
一般社団法人 粉体粉末冶金協会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282681286027392
-
- NII論文ID
- 10025398989
-
- NII書誌ID
- AN00222724
-
- COI
- 1:CAS:528:DC%2BD1MXhtVaqtLfE
-
- ISSN
- 18809014
- 05328799
-
- NDL書誌ID
- 10356654
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可