カプセルフリーN2-HIP処理によるAl2O3/Mo2Nコンポジットの合成と特性評価

  • 高岡 勝哉
    同志社大学理工学部機能分子・生命化学科
  • 村瀬 康
    同志社大学理工学部機能分子・生命化学科
  • 加藤 将樹
    同志社大学理工学部機能分子・生命化学科
  • 廣田 健
    同志社大学理工学部機能分子・生命化学科

書誌事項

タイトル別名
  • Synthesis of Al2O3/Mo2N Composite Materials Using Capsule-free Nitrogen HIPing and their Evaluation
  • カプセルフリー N2 HIP ショリ ニ ヨル Al2O3 Mo2Nコンポジット ノ ゴウセイ ト トクセイ ヒョウカ

この論文をさがす

抄録

Synthesis of dense composite materials with the compositions of Al2O3/Mo2N=100/0∼40/60 vol% has been attempted directly from Al2O3/Mo mixed raw powder compacts using capsule-free N2 hot isostatic pressing (HIP). During HIPing [1500°C/(16∼20-200MPa)/1h], solid/gas reaction between Mo and N2 was introduced to form Mo2N. The most of sintered composites consisting of only Al2O3 and Mo2N phases reached to a higher relative density than 98.0 % with closed pores nevertheless capsule-free HIPing. Dispersion of Mo2N particles just formed suppressed the grain growth of Al2O3 during sintering. Mechanical properties, such as bending strength (σb), Vickers hardness (HV), fracture toughness (K1C), and other properties have been evaluated as a function of their compositions. The best mechanical values of σb (∼573 MPa), HV (∼20.3 GPa) and K1C (∼5.00 MPa·m1/2) were attained at the composition of Al2O3/Mo2N=90/10 vol%, due to a high density (98.6 %) and small grain size of Al2O3 matrix (Gs∼4.70 μm). Further addition of Mo2N reduced the sinterability of matrix grains, resulting in low densities of around 90 % at the 40/60 vol% composition.

収録刊行物

被引用文献 (1)*注記

もっと見る

参考文献 (25)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ