Improvement of Transpassive Intergranular Corrosion Resistance of 304 Austenitic Stainless Steel by Thermomechanical Processing for Twin-induced Grain Boundary Engineering

DOI Web Site 被引用文献3件 参考文献83件
  • Jin Wei Zhong
    Department of Materials Processing, Graduate School of Engineering, Tohoku University
  • Kokawa Hiroyuki
    Department of Materials Processing, Graduate School of Engineering, Tohoku University
  • Wang Zhan Jie
    Department of Materials Science, Graduate School of Engineering, Tohoku University
  • Sato Yutaka S.
    Department of Materials Processing, Graduate School of Engineering, Tohoku University
  • Hara Nobuyoshi
    Department of Materials Science, Graduate School of Engineering, Tohoku University

この論文をさがす

抄録

Grain boundary engineering (GBE) primarily aims to prevent the initiation and propagation of intergranular degradation along grain boundaries by frequent introduction of coincidence site lattice (CSL) boundaries into the grain boundary networks in materials. It has been reported that GBE is effective to prevent passive intergranular corrosion such as sensitization of austenitic stainless steels, but the effect of GBE on transpassive corrosion has not been clarified. In the present study, a twin-induced GBE utilizing optimized thermomechanical processing with small pre-strain and subsequent annealing was applied to introduce very high frequencies of CSL boundaries into type 304 austenitic stainless steels containing different phosphorus concentrations. The resulting steels showed much higher resistance to transpassive intergranular corrosion during the Coriou test, in comparison with the as-received ones. The high CSL frequency resulted in a very low percolation probability of random boundary networks in the over-threshold region and remarkable suppression of intergranular deterioration during GBE.

収録刊行物

被引用文献 (3)*注記

もっと見る

参考文献 (83)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ