Spectrophotometric Determination of Residual Chlorine in Tap Water Using Alternative Simultaneous Injection/Effective Mixing Analysis System

DOI Web Site Web Site 1 Citations 41 References
  • ANDO Shima
    Department of Applied Chemistry, Aichi Institute of Technology
  • TESHIMA Norio
    Department of Applied Chemistry, Aichi Institute of Technology
  • SAKAI Tadao
    Department of Applied Chemistry, Aichi Institute of Technology
  • MOTOMIZU Shoji
    Department of Applied Chemistry, Aichi Institute of Technology

Bibliographic Information

Other Title
  • 新規な同時注入/迅速混合流れ分析法による残留塩素の定量
  • シンキ ナ ドウジ チュウニュウ/ジンソク コンゴウナガレ ブンセキホウ ニ ヨル ザンリュウ エンソ ノ テイリョウ

Search this article

Abstract

An alternative simultaneous injection-effective mixing analysis system controlled by a personal computer was proposed for the determination of residual chlorine. This system consists of a sequential injection mode (SI), a multi-commutation mode (MC) and a flow injection mode (FI). Chlorine reacts with 4,4'-bis-dimethylaminothiobenzophenon dissolved in Triton X-100, 2-methoxyethanol and formic acid/fomate buffer to form a blue compound (λmax, 640 nm). The calibration graph was linear in the range of 0–1.68 mg L−1 chlorine and the regression coefficient was 0.999. The RSD for 0.56 mg L−1 chlorine (n = 5) was 0.37% and the repeatability was excellent. The sampling rate for one analysis was 41 s. This method is less reagent consuming and the sensitivity is excellent. This method is applicable to the determination of residual chlorine in tap water.

Journal

  • BUNSEKI KAGAKU

    BUNSEKI KAGAKU 61 (2), 115-121, 2012

    The Japan Society for Analytical Chemistry

Citations (1)*help

See more

References(41)*help

See more

Related Projects

See more

Keywords

Details 詳細情報について

Report a problem

Back to top