Ta/Zr接合界面における水素脆化防止に対する施工指針の提案  ‐SUS304ULC/Ta/Zr爆発接合継手の水素脆化に関する研究‐

書誌事項

タイトル別名
  • Proposal of Guideline for Bonding to Prevention of Hydrogen Embrittlement at Ta/Zr Bond Interface - Hydrogen Embrittlement in SUS304ULC/Ta/Zr Explosive Bonded Joint -
  • Proposal of Guideline for Bonding to Prevention of Hydrogen Embrittlement at Ta/Zr Bond Interface
  • - Hydrogen Embrittlement in SUS304ULC/Ta/Zr Explosive Bonded Joint -
  • -SUS304ULC/Ta/Zr爆発接合継手の水素脆化に関する研究-

この論文をさがす

抄録

The occurrence condition of hydrogen embrittlement cracking at Ta/Zr bond interface was investigated with respect to the hydrogen content and applied stress in order to propose a guideline for the explosive bonding procedure to prevention of hydrogen embrittlement. Hydrogen charging test was conducted for SUS304ULC/Ta/Zr explosive bonded joints applied the different flexural strains. A hydrogen embrittlement crack occurred in the Zr substrate at Ta/Zr bond interface after hydrogen charging, and it was initiated at shorter charging times when the augmented strain was increased. The occurrence condition of hydrogen embrittlement cracking at Ta/Zr bond interface was shifted to lower stress and hydrogen content with an increase in the amount of explosive during bonding. It was suggested that hydrogen embrittlement in Ta/Zr explosive bonded joint could be inhibited by reducing the initial hydrogen content in Ta substrate less than approx. 5ppm.

収録刊行物

参考文献 (10)*注記

もっと見る

詳細情報 詳細情報について

  • CRID
    1390282679703170560
  • NII論文ID
    10030150100
  • NII書誌ID
    AN1005067X
  • DOI
    10.2207/qjjws.28.248
  • ISSN
    24348252
    02884771
  • 本文言語コード
    ja
  • データソース種別
    • JaLC
    • Crossref
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ